A Continuous Mapping of Tidal Current Structures in the Kanmon Strait

Tidal current structures at the Hayatomono-Seto of the Kanmon Strait are mapped continuously during March 17 to 20, 2003, including a spring tide, by the eight coastal acoustic tomography (CAT) systems distributed on both the sides of the strait. Detailed structures of strong tidal currents and their associated vortices are well reconstructed by the inverse analysis of travel-time difference data obtained from the reciprocal sound transmission between the paired CAT systems located at both sides of the strait mainly. The results are well compared to the shipboard acoustic Doppler current profiler (ADCP) data at the correlation rate of 0.84/0.82 and the RMS difference of 0.47/0.48 ms⁻¹ for the east-west/north-south current after the selection of good data. During the observation period, the maximum hourly mean volume transport for the upper 7 m layer across the strait reached 13,314 m³ s⁻¹ for the eastward and 5,547 m³ s⁻¹ for the westward. The daily mean transport is directed to the eastward and estimated 1,470 m³ s⁻¹ and 2,140 m³ s⁻¹ for March 18 and 19, respectively, when a spring tide occurs.     

Primary production in the Kuroshio current surrounding Taiwan

Primary production in the Kuroshio current flowing around Taiwan Island was measured by using the radiocarbon method. High values of the daily primary production were found in both the aquacultural area at the western coast and the polluted area with raw rubbish heaps at the Keelung-Patoutzu coast. In the upwelling region of southeastern coast, low values of the primary production were observed. In the eastern coast, the rate of photosynthesis for an unit amount of chlorophylla under the saturated light was in the range of 1.2±0.2 mg C/mg chlorophylla/hr. Some discussions are made on the observed results.     

Sedimentation in the floodplains of the Mekong Delta,Vietnam. Part I: suspended sediment dynamics

Suspended sediment is the primary source for a sustainable agro‐ecosystem in the Mekong Delta by providing nutrient input for the subsequent cropping season. In addition, the suspended sediment concentration (SSC) plays an important role in the erosion and deposition processes in the Delta; that is, it influences the morphologic development and may counteract the deltaic subsidence and sea level rise. Despite this importance, little is known about the dynamics of suspended sediment in the floodplains of the Mekong Delta. In particular, quantitative analyses are lacking mainly because of data scarcity with respect to the inundation processes in the floodplains. In 2008, therefore, a comprehensive in situ system to monitor the dynamics of suspended sediment in a study area located in the Plain of Reeds was established, aiming at the characterization and quantification of suspended sediment dynamics in the deeply inundated parts of the Vietnamese part of the Mekong Delta. The monitoring system was equipped with seven water quality–monitoring stations. They have a robust design and autonomous power supply suitable for operation on inundated floodplains, enabling the collection of reliable data over a long period of time with a high temporal resolution. The data analysis shows that the general seasonal dynamics of suspended sediment transport in the Delta is controlled by two main mechanisms: the flood wave of the Mekong River and the tidal backwater influences from the coast. In the channel network, SSC decreases exponentially with distance from the Mekong River. The anthropogenic influence on SSC could also be identified for two periods: at the start of the floodplain inundation and at the end of the flood period, when subsequent paddy rice crops are prepared. Based on the results, we recommend an operation scheme for the sluice gates, which intends to distribute the sediment and thus the nutrients equally over the floodplain. Copyright © 2013 John Wiley & Sons, Ltd.     

A FEM-MPM hybrid coupled framework based on local shear strength method for simulating rainfall/runoff-induced landslide runout

Landslides - Limited by the independence and its defects of each general software package, simultaneous analysis of runoff, seepage, and large-deformation analysis is still an inevitable challenge....     

Calculation of seismic bearing capacity of shallow strip foundations using the cell-based smoothed finite element method

This paper adopts an upper bound procedure using the cell-based smoothed finite element method (CS-FEM) to estimate the seismic bearing capacity of shallow strip footings, focussing on seismic soil-structure interactions. In simulations, soil behaviour is assumed as the Mohr–Coulomb material, and increment of plasticity deformation obeys the associated flow rule. The first step of the numerical procedure involves approximating the kinematically admissible displacement fields using the cell-based smoothed finite element method, while the second relates to the establishments of the optimization problem as the conic programming. The inclusion of seismic conditions in the simulations was made using the pseudo-static approach. Initially, three seismic bearing capacity factors were resolved for both smooth and rough foundations by including horizontal and vertical inertia forces caused by the soil weight, the superstructure and the surcharge in the analyses. All seismic bearing capacity components obtained are in excellent agreement with those obtained using the method of characteristics and other finite element analyses. Subsequently, the reduction coefficients that correlate static and seismic bearing capacity factors were computed to facilitate the seismic design of the foundation.

     

Novel integrated approaches for predicting the compressibility of clay using cascade forward neural networks optimized by swarm- and evolution-based algorithms

Acta Geotechnica - Soft soils are considered as disadvantages in construction, especially in clay layers. It requires many advanced techniques to treat the soft soils before construction, aiming to...     

Modelling the Asian summer monsoon using CCAM

A ten-year mean (1989–1998) climatology of the Asian summer monsoon is studied using the CSIRO Conformal-Cubic Atmospheric Model (CCAM) to downscale NCEP reanalyses. The aim of the current study is to validate the model results against previous work on this topic, in order to identify model strengths and weaknesses in simulating the Asian summer monsoon. The model results are compared with available observations and are presented in two parts. In the first part, the mean summer rainfall, maximum and minimum temperatures and winds are compared with the observations. The second part focuses on validation of the monsoon onset. The model captures the mean characteristics such as the cross-equatorial flow of low-level winds over the Indian Ocean and near the Somali coast, rainfall patterns, onset indices, northward movements, active-break and revival periods.