Influence of Adoptment of Geocentric 3D Coordinate System on Chinese Existent Maps

If a geocentric 3D coordinate system is adopted in China to replace 2D non-geocentric coordinate system, the coordinates of the surface points will be changed accordingly. The influences on the current maps of China, especially the topographic maps, are discussed due to the replacement of the coordinate systems. Taking the replacement of Xi‘an 80 coordinate system by GRS80 for a numerical example, this paper analyzes the changes of latitude, longitude, Gauss plane coordinates of the surface points, as well as the orientation and the length changes between the points on the map, including the changes of map border lines and sheet corner points.     

Study of a semi‐active stiffness damper under various earthquake inputs

Semi‐active stiffness damper (SASD) is one of many semi‐active control systems with the capability to mitigate the dynamic response using only a small amount of external power. The system consists of a hydraulic damper connected to the bracing frame in a selected story unit. In this paper, study of a SASD in two building models of five‐stories under four benchmark earthquake records is reported. The purpose of this study is to evaluate the effectiveness of the control system against structure type and varying earthquake inputs. Various control laws are chosen to work with SASD, such as: resetting control, switching control, linear quadratic regulator (LQR) and modified LQR, and the results are compared with no control and passive control cases. Numerical results show that the use of a SASD is effective in reducing seismic responses. Control effectiveness is dependent on the type of structure and earthquake excitation. Passive control is less effective than other control cases as expected. Resetting control, switching control and LQR generally perform similarly in response reduction. While modified LQR is more efficient and robust compared with other control algorithms. Copyright © 2002 John Wiley & Sons, Ltd.     

Parameter identification for lined tunnels in a viscoplastic medium

This paper is dedicated to the identification of constitutive parameters of elasto‐viscoplastic constitutive law from measurements performed on deep underground cavities (typically tunnels). This inverse problem is solved by the minimization of a cost functional of least‐squares type. The exact gradient is computed by the direct differentiation method and the descent is done using the Levenberg–Marquardt algorithm. The method is presented for lined or unlined structures and is applied for an elastoviscoplastic constitutive law of the Perzyna class. Several identification problems are presented in one and two dimensions for different tunnel geometries. The used measurements have been obtained by a preliminary numerical simulation and perturbed with a white noise. The identified responses match the measurements. We also discuss the usage of the sensitivity analysis of the system, provided by the direct differentiation method, for the optimization of in situ monitoring. The sensitivity distribution in space and time assess the location of the measurements points as well as the time of observation needed for reliable identification. Copyright © 2002 John Wiley & Sons, Ltd.     

Presolar spinel grains from the Murray and Murchison carbonaceous chondrites

With a new type of ion microprobe, the NanoSIMS, we determined the oxygen isotopic compositions of small (<1μm) oxide grains in chemical separates from two CM2 carbonaceous meteorites, Murray and Murchison. Among 628 grains from Murray separate CF (mean diameter 0.15 μm) we discovered 15 presolar spinel and 3 presolar corundum grains, among 753 grains from Murray separate CG (mean diameter 0.45 μm) 9 presolar spinel grains, and among 473 grains from Murchison separate KIE (mean diameter 0.5 μm) 2 presolar spinel and 4 presolar corundum grains. The abundance of presolar spinel is highest (2.4%) in the smallest size fraction. The total abundance in the whole meteorite is at least 1 ppm, which makes spinel the third-most abundant presolar grain species after nanodiamonds (if indeed a significant fraction of them are presolar) and silicon carbide. The O-isotopic distribution of the spinel grains is very similar to that of presolar corundum, the only statistically significant difference being that there is a larger fraction of corundum grains with large ¹⁷O excesses (¹⁷O/¹⁶O > 1.5 × 10⁻³), which indicates parent stars with masses between 1.8 and 4.5 M_⊙.     

Use of microtremor measurement for assessing site effects in Northern Belgium – interpretation of the observed intensity during the MS = 5.0 June 11 1938 earthquake

To provide quantitative information on site effects in the northern part of Belgium, forty-seven H/V microtremor measurements were performed with 5 second seismometers over an area of about 15.000 km². Most of the results show a northward regular increase of the fundamental period in agreement with the augmentation of the Mesozoic and Cainozoic soft sedimentsthickness from a few meters 40 km south of Brussels to 900 m at the Netherlands-Belgium border. The measured resonance frequency values wereconsistent with theoretical computations performed at different sites onthe basis of existing information and shallow seismic experiments. At oneparticular site (Uccle) where borehole data were available, microtremor measurements using an array of four seismological stations with differentapertures allowed to obtain the low frequency part of the Rayleigh wave dispersion curve, extending the range covered by the analysis of surfacewaves artificially generated. The Vs profile derived from the surface waveinversion corroborates the 1 Hz natural frequency of the site. Comparison of these results with the macroseismic information concerning the M_S = 5.0 1938 earthquake which occurred 50 km west of Brussels,confirmed the hypothesis that the geological structure of the Brabant massifis likely to control damage distribution during such an earthquake. Comparisonbetween the intensity map of the 1938 earthquake and the resonance period ofsediments obtained by our microtremor study shows a clear relation betweenthe two parameters. During the 1938 earthquake, site effects played a prominent role due to the dimension of the source whose corner frequency wasabout 1 Hz.     

Image processing of 2D resistivity data for imaging faults

A methodology to locate automatically limits or boundaries between different geological bodies in 2D electrical tomography is proposed, using a crest line extraction process in gradient images. This method is applied on several synthetic models and on field data set acquired on three experimental sites during the European project PALEOSIS where trenches were dug. The results presented in this work are valid for electrical tomographies data collected with a Wenner-alpha array and computed with an l₁ norm (blocky inversion) as optimization method. For the synthetic cases, three geometric contexts are modelled: a vertical and a dipping fault juxtaposing two different geological formations and a step-like structure. A superficial layer can cover each geological structure. In these three situations, the method locates the synthetic faults and layer boundaries, and determines fault displacement but with several limitations. The estimated fault positions correlate exactly with the synthetic ones if a conductive (or no superficial) layer overlies the studied structure. When a resistive layer with a thickness of 6 m covers the model, faults are positioned with a maximum error of 1 m. Moreover, when a resistive and/or a thick top layer is present, the resolution significantly decreases for the fault displacement estimation (error up to 150%). The tests with the synthetic models for surveys using the Wenner-alpha array indicate that the proposed methodology is best suited to vertical and horizontal contacts. Application of the methodology to real data sets shows that a lateral resistivity contrast of 1:5–1:10 leads to exact faults location. A fault contact with a resistivity contrast of 1:0.75 and overlaid by a resistive layer with a thickness of 1 m gives an error location ranging from 1 to 3 m. Moreover, no result is obtained for a contact with very low contrasts (1:0.85) overlaid by a resistive soil. The method shows poor results when vertical gradients are greater than horizontal ones. This kind of image processing technique should be systematically used for improving the objectiveness of tomography interpretation when looking for limits between geological objects.     

Probabilistic landslide susceptibility mapping in the Lai Chau province of Vietnam: focus on the relationship between tectonic fractures and landslides

This study evaluates the susceptibility of landslides in the Lai Chau province of Vietnam using Geographic Information System (GIS) and remote sensing data to focus on the relationship between tectonic fractures and landslides. Landslide locations were identified from aerial photographs and field surveys. Topographic, geological data and satellite images were collected, processed, and constructed into a spatial database using GIS data and image-processing techniques. A scheme of the tectonic fracturing of crust in the Lai Chau region was established. Lai Chau was identified as a region with many crustal fractures, where the grade of tectonic fracture is closely related to landslide occurrence. The influencing factors of landslide occurrence were: distance from a tectonic fracture, slope, aspect, curvature, soil, and vegetative land cover. Landslide prone areas were analyzed and mapped using the landslide occurrence factors employing the probability–frequency ratio model. The results of the analysis were verified using landslide location data and showed 83.47% prediction accuracy. That emphasized a strong relationship between the susceptibility map and the existing landslide location data. The results of this study can form a basis stable development and land use planning for the region.     

A multiphase approach for evaluating the horizontal and rocking impedances of pile group foundations

This paper advocates the use of a multiphase model, already developed for static or quasi‐static geotechnical engineering problems, for simulating the behaviour of piled raft foundations subject to horizontal as well as rocking dynamic solicitations. It is shown that such a model, implemented in a FEM code, yields appropriate predictions for the foundation impedance characteristics, provided that shear and bending effects in the piles are taken into account, thus corroborating the findings of the asymptotic homogenization theory. Besides, it is notably pointed out that such a multiphase‐based computational tool makes it possible to assess the dynamic behaviour of pile groups in a much quicker way than when using direct numerical simulations, which may face oversized problems when large pile groups are concerned. Copyright © 2016 John Wiley & Sons, Ltd.     

The data‐driven approach as an operational real‐time flood forecasting model

Accurate water level forecasts are essential for flood warning. This study adopts a data‐driven approach based on the adaptive network–based fuzzy inference system (ANFIS) to forecast the daily water levels of the Lower Mekong River at Pakse, Lao People's Democratic Republic. ANFIS is a hybrid system combining fuzzy inference system and artificial neural networks. Five ANFIS models were developed to provide water level forecasts from 1 to 5 days ahead, respectively. The results show that although ANFIS forecasts of water levels up to three lead days satisfied the benchmark, four‐ and five‐lead‐day forecasts were only slightly better in performance compared with the currently adopted operational model. This limitation is imposed by the auto‐ and cross‐correlations of the water level time series. Output updating procedures based on the autoregressive (AR) and recursive AR (RAR) models were used to enhance ANFIS model outputs. The RAR model performed better than the AR model. In addition, a partial recursive procedure that reduced the number of recursive steps when applying the AR or the RAR model for multi‐step‐ahead error prediction was superior to the fully recursive procedure. The RAR‐based partial recursive updating procedure significantly improved three‐, four‐ and five‐lead‐day forecasts. Our study further shows that for long lead times, ANFIS model errors are dominated by lag time errors. Although the ANFIS model with the RAR‐based partial recursive updating procedure provided the best results, this method was able to reduce the lag time errors significantly for the falling limbs only. Improvements for the rising limbs were modest. Copyright © 2011 John Wiley & Sons, Ltd.     

甘肃柳园地区典型矿床的多功能电法应用试验

多功能电法系统是近年来研发的具有我国自主知识产权的地球物理勘探系统,适用于金属矿、地下水、地热、油气藏等资源勘查和研究。选择甘肃柳园地区的花牛山热水沉积型铅锌矿区,开展了多功能电法的应用试验,验证新技术在此类矿床普查评价阶段的有效性。利用大功率激电剖面测量圈定激电异常,并结合已知地质资料进行了评价分析;在有激电异常的主要剖面部署了可控源音频大地电磁测深,获取了地下电性结构。应用结果表明,开展的大功率激电测量和可控源音频大地电磁测深反映出了与矿体有关的地球物理异常,试验应用成果可为同类型矿床的勘查起到示范作用。