Parametrization of peatland hydraulic properties for the Canadian land surface scheme

Abstract

A hydraulic parametrization is developed for peatland environments in the Canadian Land Surface Scheme (CLASS). Three ‐wetland soil classes account for the typical variation in the hydraulic characteristics of the uppermost 0.5 m of organic soils. Review of the literature reveals that saturated hydraulic conductivity varies from a median of 1.0 × 10^?7m/s in deeply humified sapric peat to 2.8 × 10^?4 m/s in relatively undecomposed fibric peat. Average pore volume fraction ranges from 0.83 to 0.93. Parameters have been designed for the soil moisture characteristic curves for fibric, hemic and sapric peat using the Campbell (1974) equation employed in CLASS, and the van Genuchten (1980) formulation. There is little difference in modelled soil moisture between the two formulations within the range of conditions normally found in peatlands. Validation of modelled water table depth and peat temperature is performed for a fen in northern Québec and a bog in north‐central Minnesota. The new parametrization results in a more realistic simulation of these variables in peatlands than the previous version of CLASS, in which unrealistic mineral soil “equivalents “ were used for wetland soil climate modelling.     

Failure to achieve stringent carbon reduction targets in a second-best policy world

Legislation to decarbonise energy systems within overall greenhouse gas reduction targets represents an immense and unprecedented energy policy challenge. However there is a dichotomy between this level of policy ambition and prior modelling studies that find such targets economically, technologically and socially feasible under idealised ?Dfirst-best policies. This paper makes a significant contribution to current analytical efforts to account for realistic ?Dsecond-best climate mitigation policy implementation. This is achieved via a technical classification of secondbest common mode issues at a detailed national level: both internal (behavioural change, infrastructure implementation) and external (new technologies, resource availability). Under a combinatory second-best scenario, meeting targets greater than a 70% reduction in CO₂ by 2050 entail costs above a subjective barrier of 1% of GDP, while extreme mitigation scenarios (>90% CO₂ reduction) are infeasible. These high costs are equally due to disappointing progress in behavioural and technological mitigation efforts. Expensive second-best mitigation scenarios can still rely on extreme assumptions including the full deployment of the UK??s offshore wind resource or the complete diffusion of energy efficiency measures in end-use sectors. By demonstrating the fragilities of a low carbon energy system pathway, policy makers can explore protective and proactive strategies to ensure targets can actually be met. Additionally, systematic analysis of failure in stringent long term decarbonisation scenarios teaches energy analysts about the trade-offs in model efficacy vs. confidence.     

Climate change impacts and adaptation of commercial marine fisheries in Australia: a review of the science

Commercial marine fishing contributes significantly to the Australian economy, and has great importance for coastal communities. However, climate change presents significant challenges for Australia’s fishing industries, now and into the future. With greater use of targeted information, the fishing industry will be better placed to minimise the negative impacts and take advantage of opportunities associated with the effects of climate change. The future of the fishing industry—specifically wild capture fisheries—will depend on its ability and capacity to apply appropriate adaptation strategies for its viability and sustainability in the long-term. Knowledge regarding expected long-term changes in species distributions, improved weather and seasonal climate forecasts and their influence on target species, and better understanding of species tolerances, can inform adaptation responses. This paper provides a review of recent advances in research addressing Australia’s priorities in relation to commercial marine fisheries’ responses to current and anticipated future climate change impacts, and considers barriers and adaptation options for fisheries management over the near-term planning horizon of 5–7 years.     

Suspended sediment fluxes in a tidal wetland: Measurement, controlling factors, and error analysis

Suspended sediment fluxes to and from tidal wetlands are of increasing concern because of habitat restoration efforts, wetland sustainability as sea level rises, and potential contaminant accumulation. We measured water and sediment fluxes through two channels on Browns Island, at the landward end of San Francisco Bay, United States, to determine the factors that control sediment fluxes on and off the island. In situ instrumentation was deployed between October 10 and November 13, 2003. Acoustic Doppler current profilers and the index velocity method were employed to calculate water fluxes. Suspended sediment concentrations (SSC) were determined with optical sensors and cross-sectional water sampling. All procedures were analyzed for their contribution to total error in the flux measurement. The inability to close the water balance and determination of constituent concentration were identified as the main sources of error; total error was 27% for net sediment flux. The water budget for the island was computed, with an unaccounted input of 0.20 m³s⁻¹ (22% of mean inflow), after considering channel flow, change in water storage, evapotranspiration, and precipitation. The net imbalance may be a combination of groundwater seepage, overland flow, and flow through minor channels. Change of island water storage, caused by local variations in water surface elevation, dominated the tidally averaged water flux. These variations were mainly caused by wind and barometric pressure change, which alter regional water levels throughout the Sacramento-San Joaquin River Delta. Peak instantaneous ebb flow was 35% greater than peak flood flow, indicating an ebbdominant system, though dominance varied with the spring-neap cycle. SSC were controlled by wind-wave resuspension adjacent to the island and local tidal currents that mobilized sediment from the channel bed. During neap tides sediment was imported onto the island but during spring tides sediment was exported because the main channel became ebb dominant. Over the 34-d monitoring period 14,000 kg of suspended sediment were imported through the two channels. The water imbalance may affect the sediment balance if the unmeasured water transport pathways are capable of transporting large amounts of sediment. We estimate a maximum of 2,800 kg of sediment may have been exported through unmeasured pathways, giving a minimum ent import of 11,200 kg. Sediment flux measurements provide insight on tidal to fortnightly marsh sedimentation processes, especially in complex systems where sedimentation is spatially and temporally variable.     

Geochemistry of the Archean Yellowknife Supergroup

The Archean Yellowknife Supergroup (Slave Structural Province. Canada) is composed of a thick sequence of supracrustal rocks, which differs from most Archean greenstone belts in that it contains a large proportion ( ~ 80%) of sedimentary rocks. Felsic volcanics of the Banting Formation are characterized by HREE depletion without Eu-anomalies, indicating an origin by small degrees of partial melting of a mafic source, with minor garnet in the residua. Granitic rocks include synkinematic granites [HREE-depleted; low (${}^{87}\text{Sr}{}^{86}\text{Sr}$)_I], post-kinematic granites [negative Eu-anomalies, high (${}^{87}\text{Sr}{}^{86}\text{Sr}$)_I] and granitic gneisses with REE patterns similar to the post-kinematic granites. Sedimentary rocks (turbidites) of the Burwash and Walsh Formations have similar chemical compositions and were derived from 20% mafic-intermediate volcanics, 55% felsic volcanics and 25% granitic rocks. Jackson Lake Formation lithic wackes can be divided into two groups with Group A derived from 50% mafic-intermediate volcanics and 50% felsic volcanics and Group B, characterized by HREE depletion, derived almost exclusively from felsic volcanics.REE patterns of Yellowknife sedimentary rocks are similar to other Archean sedimentary REE patterns, although they have higher $\text{La}{}_{\mathrm{N}}\text{Yb}{}_{\mathrm{N}}$. These patterns differ significantly from typical post-Archean sedimentary REE patterns, supporting the idea that Archean exposed crust had a different composition than the present day exposed crust.     

An Early Pleistocene hippopotamus from Westbury Cave,Somerset, England: support for a previously unrecognized temperate interval in the British Quaternary record

Although fossil assemblages from the late Early Pleistocene are very rare in Britain, the site of Westbury Cave in Somerset, England, has the potential to address this gap. The mammal fossils recovered previously from the Siliceous Member in Westbury Cave, though few in number, have hinted at an age for the deposits that is as yet unparalleled in Britain. Here, we describe the first bona fide occurrence of Hippopotamus in the British Early Pleistocene, discovered during recent reinvestigation of the Siliceous Member. The hippo fossil indicates a refined biochronological age of ca. 1.5–1.07 Ma for the Siliceous Member and a palaeoclimate that was warm and humid, which accords well with previous palaeoenvironmental inferences. A synthesis of late Early Pleistocene hippo occurrences suggests that the Siliceous Member hippo may have been part of an early colonization of north-west Europe by these megaherbivores, possibly during MIS (Marine Oxygen Isotope Stage) 31. Alternatively, it evidences a currently cryptic northward migration during an even earlier temperate phase. In either case, the Siliceous Member is likely to represent a warm period that has not been recognized previously in the British Quaternary record.     

Upper Carboniferous to Lower Permian transgressive–regressive sequences of central Spitsbergen,Arctic Norway

Investigation of the Upper Carboniferous to Lower Permian sedimentary strata of central Spitsbergen shows that this highly cyclic rock succession is composed of four long-term transgressive–regressive cycles. These long-term cycles are themselves composed of stacked higher order cycles. Transgressive phases are characterized by increasing accommodation space, and include a basal transgressive part of marked retrogradation of facies belts and thickening-upward component cycles. Regressive phases are characterized by decreasing accommodation space, displayed by progradation of facies belts, overall shallowing and increased restriction of the depositional environment, influx of coarse terrigenous sediments and increasing evidence of exposure and/or non-deposition. The oldest transgressive–regressive sequence identified, Sequence 1, is of Serpukhovian to Bashkirian age and represents a syn-rift sequence. Also composed of syn-rift sediments is the transgressive–regressive Moscovian to mid-Gzhelian-aged Sequence 2. The late Gzhelian to late Asselian Sequence 3 is mainly a post-rift sequence. The youngest sequence, Sequence 4, is of Sakmarian to possible Artinskian age, and is also composed of post-rift sediments. The individual transgressive–regressive cycles are defined as second-order cycles, based on lithological signatures, lateral extent of bounding unconformities, and the actual time period the cycles span. Local tectonic activity is believed to control to some extent the development of short-term cycles in the syn-rift succession. However, cyclicity within the long-term cycles is mainly controlled by eustatic sea-level fluctuations, and therefore enables them to be correlated to other Circum-Arctic regions. Copyright © 1999 John Wiley & Sons, Ltd.