Science aspects of a mission beyond the planets

A mission out of the planetary system, launched about the year 2000, could provide valuable data concerning characteristics of the heliopause, the interstellar medium, stellar distances (by parallax measurements), low-energy cosmic rays, interplanetary gas distribution, and mass of the solar system. Secondary objectives include investigation of Pluto. Candidate science measurements, instruments, and instrument development needs are discussed. The mission should extend from 400 to 1000 AU from the Sun. A heliocentric hyperbolic escape velocity of 50–100 km/sec or more is needed to attain this distance within a reasonable mission duration (20–50 years). The trajectory should be toward the incoming interstellar gas. For a year 2000 launch, a Pluto encounter and orbiter can be included. A second mission targeted parallel to the solar axis would also be worthwhile.     

Present day serpentinization in New Caledonia,Oman and Yugoslavia

Geochemical evidence for modern low-temperature serpentinization has been found in three new localities. Apparently the low-temperature reactions are a common mode of formation of the lizardite-chrysotile and brucite assemblage. Possibly the ¹⁸O content of serpentine formed at low temperatures is in part inherited from the pyroxene and olivine.     

Radiative transfer in spherical shell atmospheres: I. Rayleigh scattering

A comparison is made between the plane-parallel approximation and the more realistic spherical shell approximation for the radiance reflected from a planetary atmosphere. In this paper we have considered a planet of radius 6371 km (the Earth) with a homogeneous, conservative, Rayleigh scattering atmosphere extending to a height of 100 km. We have found significant departures from the plane-parallel approximation. Radiance versus height distributions for both single and multiple scattering are presented. Results are presented for the fractional radiance from altitudes in the atmosphere which contribute to the total unidirectional reflected radiance at the top of the atmosphere. We have referred to this as the radiance versus height distribution in the sequel. These data will be very useful for both remote sensing applications and planetary spectroscopy. We have also found that gross violations of the principle of reciprocity do occur in the spherical shell approximation.     

Heat-producing elements in the lunar mantle: Insights from ion microprobe analyses of lunar pyroclastic glasses

We provide new estimates for the abundance of heat-producing elements in the lunar mantle by using SIMS techniques to measure the concentrations of thorium and samarium in lunar pyroclastic glasses. Lunar pyroclastic glasses are utilized in this study because they represent quenched products of near-primary melts from the lunar mantle and as such, they provide compositional information about the mantle itself. Thorium and samarium were measured because: (1) Th is not significantly fractionated from Sm during partial melting of the pyroclastic glass source regions, which are dominated by olivine and pyroxene. Therefore, the Th/Sm ratios that we measure in the pyroclastic glasses reflect the Th/Sm ratio of the pyroclastic glass source regions. (2) Strong correlations between Th, U, and K on the Moon allow us to use measured Th concentrations to estimate the concentrations of U and K in the pyroclastic glasses. (3) Th, Sm, U, and K are radioactive elements and as such, their concentrations can be used to investigate heat production in the lunar mantle.The results from this study show that the lunar mantle is heterogeneous with respect to heat-producing elements and that there is evidence for mixing of a KREEP component into the source regions of some of the pyroclastic glasses. Because the source regions for many of the glasses are deep (?400 km), we propose that a KREEP component was transported to the deep lunar mantle. KREEP enriched sources produce 138% more heat than sources that do not contain KREEP and therefore, could have provided a source of heat for extended periods of nearside basaltic magmatism. Data from this study, in conjunction with models for the fractional crystallization of a lunar magma ocean, are used to show that the average lunar mantle contains 0.15 ppm Th, 0.54 ppm Sm, 0.039 ppm U, and 212 ppm K. This is a greater enrichment in radiogenic elements than some earlier estimates, suggesting a more prolonged impact of radiogenic heat on nearside basaltic volcanism.     

The Wuchiapingian–Changhsingian boundary (Upper Permian) at Meishan of Changxing County, South China

Section D at Meishan, Changxing County in the Zhejiang Province, China, has been extensively studied in various aspects of the stratigraphy during the past 20 years. It was ratified by the International Union of Geological Sciences (IUGS) as the Global Standard Stratotype Section and Point (GSSP) for the Permian–Triassic boundary in 2000, and is also a potential stratotype for the Wuchiapingian–Changhsingian boundary. However, the contact relationship between the Longtan (Wuchiapingian) and Changxing (Chainghsingian) formations has been a controversial subject for years. Recent studies on Section C, about 300 m west of Section D, at Meishan confirm a complete depositional succession around the boundary and suggest that the proposed boundary level, the FAD of Clarkina wangi within the lineage from C. longicuspidata to C. wangi, is consistent with the first appearance of the index Changhsingian fusulinid Palaeofusulina sinensis and tapashanitid ammonoids.     

The effect of multiple stressors on salt marsh end-of-season biomass

It is becoming more apparent that commonly used statistical methods (e.g. analysis of variance and regression) are not the best methods for estimating limiting relationships or stressor effects. A major challenge of estimating the effects associated with a measured subset of limiting factors is to account for the effects of unmeasured factors in an ecologically realistic matter. We used quantile regression to elucidate multiple stressor effects on end-of-season biomass data from two salt marsh sites in coastal Louisiana collected for 18 yr. Stressor effects evaluated based on available data were flooding, salinity air temperature, cloud cover, precipitation deficit, grazing by muskrat, and surface water nitrogen and phosphorus. Precipitation deficit combined with surface water nitrogen provided the best two-parameter model to explain variation in the peak biomass with different slopes and intercepts for the two study sites. Precipitation deficit, cloud cover, and temperature were significantly correlated with each other. Surface water nitrogen was significantly correlated with surface water phosphorus and muskrat density. The site with the larger duration of flooding showed reduced peak biomass, when cloud cover and surface water nitrogen were optimal. Variation in the relatively low salinity occurring in our study area did not explain any of the variation inSpartina alterniflora biomass.     

Asymmetric vegetation responses to mid-Holocene aridity at the prairie-forest ecotone in south-central Minnesota

The mid-Holocene (ca. 8000-4000 cal yr BP) was a time of marked aridity throughout much of Minnesota, and the changes due to mid-Holocene aridity are seen as an analog for future responses to global warming. In this study, we compare the transition into (ca. 9000-7000 yr ago) and out of (ca. 5000-2500 yr ago) the mid-Holocene (MH) period at Kimble Pond and Sharkey Lake, located along the prairie forest ecotone in south-central Minnesota, using high resolution (∼ 5-36 yr) sampling of pollen, charcoal, sediment magnetic and loss-on-ignition properties. Changes in vegetation were asymmetrical with increasing aridity being marked by a pronounced shift from woodland/forest-dominated landscape to a more open mix of grassland and woodland/savanna. In contrast, at the end of the MH, grassland remained an important component of the landscape despite increasing effective moisture, and high charcoal influxes (median 2.7-4.0 vs. 0.6-1.7 mm² cm^− 2 yr^− 1 at start of MH) suggest the role of fire in limiting woodland expansion. Asymmetric vegetation responses, variation among and within proxies, and the near-absence of fire today suggest caution in using changes associated with mid-Holocene aridity at the prairie forest boundary as an analog for future responses to global warming.     

Effect of polypropylene fibre and lime admixture on engineering properties of clayey soil

In order to reduce the brittleness of soil stabilized by lime only, a recent study of a newly proposed mixture of polypropylene fibre and lime for ground improvement is described and reported in the paper. To investigate and understand the influence of the mixture of polypropylene fibre and lime on the engineering properties of a clayey soil, nine groups of treated soil specimens were prepared and tested at three different percentages of fibre content (i.e. 0.05%, 0.15%, 0.25% by weight of the parent soil) and three different percentages of lime (i.e. 2%, 5%, 8% by weight of the parent soil). These treated specimens were subjected to unconfined compression, direct shear, swelling and shrinkage tests. Through scanning electron microscopy (SEM) analysis of the specimens after shearing, the improving mechanisms of polypropylene fibre and lime in the soil were discussed and the observed test results were explained. It was found that fibre content, lime content and curing duration had significant influence on the engineering properties of the fibre–lime treated soil. An increase in lime content resulted in an initial increase followed by a slight decrease in unconfined compressive strength, cohesion and angle of internal friction of the clayey soil. On the other hand, an increase in lime content led to a reduction of swelling and shrinkage potential. However, an increase in fibre content caused an increase in strength and shrinkage potential but brought on the reduction of swelling potential. An increase in curing duration improved the unconfined compressive strength and shear strength parameters of the stabilized soil significantly. Based on the SEM analysis, it was found that the presence of fibre contributed to physical interaction between fibre and soil whereas the use of lime produced chemical reaction between lime and soil and changed soil fabric significantly.     

Investigating the scale of structural controls on chlorinated hydrocarbon distributions in the fractured-porous unsaturated zone of a sandstone aquifer in the UK

Contaminant migration behaviour in the unsaturated zone of a fractured porous aquifer is discussed in the context of a study site in Cheshire, UK. The site is situated on gently dipping sandstones, adjacent to a linear lagoon historically used to dispose of industrial wastes containing chlorinated solvents. Two cores of more than 100 m length were recovered and measurements of chlorinated hydrocarbons (CHCs), inorganic chemistry, lithology, fracturing and aquifer properties were made. The results show that selecting an appropriate vertical sampling density is crucial both to providing an understanding of contaminant pathways and distinguishing whether CHCs are present in the aqueous or non-aqueous phase. The spacing of such sampling should be on a similar scale to the heterogeneity that controls water and contaminant movement. For some sections of the Permo-Triassic aquifer, significant changes in lithology and permeability occur over vertical distances of less than 1 m and samples need to be collected at this interval, otherwise considerable resolution is lost, potentially leading to erroneous interpretation of data. At this site, although CHC concentrations were high, the consistent ratio of the two main components of the plume (tetrachloroethene and trichloroethene) provided evidence of movement in the aqueous phase rather than in dense non-aqueous phase liquid (DNAPL).