The impact of ditch blocking on fluvial carbon export from a UK blanket bog

We investigated the effects of ditch blocking on fluvial carbon concentrations and fluxes at a 5‐year, replicated, control‐intervention field experiment on a blanket peatland in North Wales, UK. The site was hydrologically instrumented, and run‐off via open and blocked ditches was analysed for dissolved organic carbon (DOC), particulate organic carbon, dissolved carbon dioxide, and dissolved methane. DOC was also analysed in peat porewater and overland flow. The hillslope experiment was embedded within a paired control‐intervention catchment study, with 3 years of preblocking and 6 years of postblocking data. Results from the hillslope showed large reductions in discharge via blocked ditches, with water partly redirected into hillslope surface and subsurface flows, and partly into remaining open ditches. We observed no impacts of ditch blocking on DOC, particulate organic carbon, dissolved carbon dioxide or methane in ditch waters, DOC in porewaters or overland flow, or stream water DOC at the paired catchment scale. Similar DOC concentrations in ditch water, overland flow, and porewater suggest that diverting flow from the ditch network to surface or subsurface flow had a limited impact on concentrations or fluxes of DOC entering the stream network. The subdued response of fluvial carbon to ditch blocking in our study may be attributable to the relatively low susceptibility of blanket peatlands to drainage, or to physical alterations of the peat since drainage. We conclude that ditch blocking cannot be always be expected to deliver reductions in fluvial carbon loss, or improvements in the quality of drinking water supplies.     

Local variability in temperature, humidity and radiation in the BaekduDaegan Mountain protected area of Korea

A novel embedded sensor network records changes in key climatic-environmental variables over a range of altitude in the BaekduDaegan Mountain (BDM) of Gangwon Province in Korea, a protected mountain region with unique biodiversity undergoing climate change research. The investigated area is subdivided into three horizontal north-south study areas. Three variables, temperature (T, ℃), relative humidity (RH, %), and light intensity (LI, lumens m -2 , or lux, lx), have been continuously measured at hourly intervals from June, 2010 to September, 2011 using HOBO H8 devices at 10 fixed study sites. These hourly observations are aggregated to monthly, seasonal and annual mean values, and results are summarized to inaugurate a long-term climate change investigation. A region wide T difference in accordance with altitude, or lapse rate, over the interval is calculated as 0.4℃100 m -1 . T lapse rates change seasonally, with winter lapse rates being greater than those of summer. RH is elevated in summer compared to other seasons. LI within forestland is lower during summer and higher during other seasons. The obtained results could closely relate to the vegetation type and structure and the terrain state since data loggers were located in forestland.     

Review of shadow detection and de-shadowing methods in remote sensing

Shadow is one of the major problems in remotely sensed imagery which hampers the accuracy of information extraction and change detection.In these images,shadow is generally produced by different objects,namely,cloud,mountain and urban materials.The shadow correction process consists of two steps:detection and de-shadowing.This paper reviews a range of techniques for both steps,focusing on urban regions(urban shadows),mountainous areas(topographic shadow),cloud shadows and composite shadows.Several issues including the problems and the advantages of those algorithms are discussed.In recent years,thresholding and recovery techniques have become important for shadow detection and de-shadowing,respectively.Research on shadow correction is still an important topic,particularly for urban regions(in high spatial resolution data) and mountainous forest(in high and medium spatial resolution data).Moreover,new algorithms are needed for shadow correction,especially given the advent of new satellite images.     

Pre-main-sequence variability across the radiative–convective gap

We use I -band imaging to perform a variability survey of the 13-Myr-old cluster h Per. We find a significant fraction of the cluster members to be variable. Most importantly, we find that variable members lie almost entirely on the convective side of the gap in the cluster sequence between fully convective stars and those which have a radiative core. This result is consistent with a scenario in which the magnetic field changes topology when the star changes from being fully convective to one containing a radiative core. When the star is convective, the magnetic field appears dominated by large-scale structures, resulting in global-size spots that drive the observed variability. For those stars with radiative cores, we observe a marked absence of variability due to spots, which suggests a switch to a magnetic field dominated by smaller-scale structures, resulting in many smaller spots and thus less apparent variability. This implies that wide field variability surveys may only be sensitive to fully convective stars. On the one hand, this reduces the chances of picking out young groups (since the convective stars are the lower mass and therefore fainter objects), but conversely the absolute magnitude of the head of the convective sequence provides a straightforward measure of age for those groups which are discovered.     

Introducing population-adjusted historical contributions to global warming

The 1997 Brazilian Proposal suggested that differentiated emissions reduction targets for Annex I parties of the UNFCCC should be based on the impact of their historic greenhouse gas emissions on global temperature rise. In this paper, we develop methodologies for (and undertake) population-adjusted historical responsibility calculations. These adjust national-level historical responsibility calculations for historical population trends. We find a weak correlation between current per capita emissions levels and population-adjusted historical responsibility. Our calculations may contribute to burden sharing schemes in future climate agreements.     

Performance evaluation of active wireline heave compensation systems in marine well logging environments

The basic functionality and performance of a new Schlumberger active wireline heave compensation system on the JOIDES Resolution was evaluated during the sea trial and a 3-year period of the IODP Phase II operations. A suite of software programs was developed to enable real-time monitoring of the dynamics of logging tools, and assess the efficiency of wireline heave compensation during downhole operations. The evaluation of the system effectiveness was performed under normal logging conditions as well as during stationary tests. Logging data were analyzed for their overall quality and repeatability, and to assess the reliability of high-resolution data such as formation microscanner (FMS) electrical images. This revealed that the system reduces 65–80 % of displacement or 88–98 % variance of downhole tool motion in stationary mode under heave conditions of ±0.2–1.5 m and water depths of 300–4,500 m in open holes. Under similar water/heave conditions, the compensator system reduces tool displacement by 50–60 %, or 75–84 % variance in downhole tool motion during normal logging operations. Such compensation efficiency (CE) is comparable to previous compensation systems, but using advanced and upgradeable technologies, and provides 50–85 % heave motion and heave variance attenuation. Moreover, logging down/up at low speeds (300–600 m/h) reduces the system’s CE values by 15–20 %, and logging down at higher speeds (1,000–1,200 m/h) eliminates CE values by 55–65 %. Considering the high quality of the logging data collected, it is concluded that the new system can provide an improved level of compensation over previous systems. Also, if practically feasible, future integration of downhole cable dynamics as an input feedback into the current system could further improve its compensation efficiency during logging operations.     

Positive Relationship between Freshwater Inflow and Oyster Abundance in Galveston Bay,Texas

Analysis of fisheries-independent data for Galveston Bay, Texas, USA, since 1985 shows eastern oysters (Crassostrea virginica) frequently demonstrate increased abundance of market-sized oysters 1 to 2 years after years with increased freshwater inflow and decreased salinity. These analyses are compared to Turner’s (Estuaries and Coasts 29:345–352, 2006) study using 3-year running averages of oyster commercial harvest since 1950 in Galveston Bay. Turner’s results indicated an inverse relationship between freshwater inflow and commercial harvest with low harvest during years of high inflow and increased harvest during low flow years. Oyster populations may experience mass mortalities during extended periods of high inflow when low salinities are sustained. Conversely, oyster populations may be decimated during prolonged episodes of low flow when conditions favor oyster predators, parasites, and diseases with higher salinity optima. Turner’s (Estuaries and Coasts 29:345–352, 2006) analysis was motivated by a proposed project in a basin with abundant freshwater where the goal of the project was to substantially increase freshwater flow to the estuary in order to increase oyster harvest. We have the opposite concern that oysters will be harmed by projects that reduce flow, increase salinity, and increase the duration of higher salinity periods in a basin with increasing demand for limited freshwater. Turner’s study and our analysis reflect different aspects of the complex, important relationships between freshwater inflow, salinity, and oysters.     

Thermal history analysis by integrated modelling of apatite fission track and vitrinite reflectance data: application to an inverted basin (Buller Coalfield, New Zealand)

Integrated analysis and modelling of apatite fission track with vitrinite reflectance (VR) data allows the timing, magnitude and pattern of Palaeogene subsidence and Neogene inversion to be established for an uplifted and largely denuded basin: the Buller Coalfield, New Zealand. At the time of maximum subsidence in the late Oligocene, the basin consisted of an extensional half graben, bounded to the west by the Kongahu Fault Zone (KFZ), with up to 6 km of upper Eocene to Oligocene section adjacent to it; currently, only a few tens of metres of basal coal measures on basement are preserved on top of a range 800–1000 m above sea level. Integrated modelling of the VR and fission track data show that the deepest parts of the basin were inverted during two Miocene compressional phases (24–19 Ma and 13–8 Ma), and are consistent with a further phase of inversion during the Quaternary that formed the present topography. Palinspastic restoration of the three phases of inversion shows that the basin was not inverted in a simple way: most of the rock uplift/denudation adjacent to the KFZ occurred during the early Miocene phase, and at the same time burial occurred in the south-eastern part of the basin (maximum temperatures were experienced at different times at different places in the basin); during the middle to late Miocene there was broad uplift in the central and eastern parts of the coalfield. Because the timing and magnitude of uplift have been derived from the zone of inversion, they can be compared independently with the timing of unconformity development and rapid subsidence in the adjacent foredeeps, particularly the Westport Trough. For the middle to late Miocene phase of inversion, we show that during the first 1–2 million years of compression, the uplift within the coalfield also involved the margins of the Westport Trough, contributing to unconformity development; subsequently, uplift continued on the inversion structure but the margins of the Westport Trough subsided rapidly. This is explained by a model of stick slip behaviour on the boundary faults, especially for the KFZ. When compression started the fault zone has locked and uplift extends into the basin, whereas subsequently the fault zone unlocks, and the inversion structure overrides the basin margin, thereby loading it and causing subsidence.     

Topography and Geologic Characteristics of Aeolian Grooves in the South Polar Layered Deposits of Mars

The topographic and geologic characteristics of grooves and groove-like features in the south polar layered deposits near the Mars Polar Lander/Deep Space 2 landing sites are evaluated using Mariner 9 images and their derived photoclinometry, normalized using Mars Orbiter Laser Altimeter data. Although both Mariner 9 and Viking images of the south polar layered deposits were available at the time of this study, Mariner 9 images of the grooves were selected because they were generally of higher resolution than Viking images. The dimensions and slopes of the grooves, together with orientations that nearly match the strongest winds predicted in the Martian Global Circulation Model and directions inferred from other wind indicators, suggest that they formed by aeolian scour of an easily erodible surface. Most grooves are symmetric and V-shaped in transverse profile, inconsistent with an origin involving extensional brittle deformation. Although the grooves strike along slopes and terraces of the south polar layered deposits, the variable depths and lack of terracing within the grooves themselves indicate that any stratigraphy in the uppermost 100 m of the polar layered deposits is composed of layers of similar, and relatively low, resistance. The grooves do not represent landing hazards at the scale of the Mariner 9 images (72-86 m/pixel) and therefore probably would not have affected Mars Polar Lander and Deep Space 2, had they successfully reached the surface.