Classifying zones of suitability for manual drilling using textural and hydraulic parameters of shallow aquifers: a case study in northwestern Senegal

A method is proposed that uses analysis of borehole stratigraphic logs for the characterization of shallow aquifers and for the assessment of areas suitable for manual drilling. The model is based on available borehole-log parameters: depth to hard rock, depth to water, thickness of laterite and hydraulic transmissivity of the shallow aquifer. The model is applied to a study area in northwestern Senegal. A dataset of boreholes logs has been processed using a software package (TANGAFRIC) developed during the research. After a manual procedure to assign a standard category describing the lithological characteristics, the next step is the automated extraction of different textural parameters and the estimation of hydraulic conductivity using reference values available in the literature. The hydraulic conductivity values estimated from stratigraphic data have been partially validated, by comparing them with measured values from a series of pumping tests carried out in large-diameter wells. The results show that this method is able to produce a reliable interpretation of the shallow hydrogeological context using information generally available in the region. The research contributes to improving the identification of areas where conditions are suitable for manual drilling. This is achieved by applying the described method, based on a structured and semi-quantitative approach, to classify the zones of suitability for given manual drilling techniques using data available in most African countries. Ultimately, this work will support proposed international programs aimed at promoting low-cost water supply in Africa and enhancing access to safe drinking water for the population.     

A Reflection on Mg, Cd, Ca, Li and Si Isotopic Measurements and Related Reference Materials

This contribution aims to report the reflections we had with the scientific community during two international workshops on reference materials for stable isotopes in Davos (2002) and Nice (2003). After evaluating the isotopic homogeneity of some existing reference materials, based on either certificates, literature data or specific inter-laboratory rounds, we confirm these as primary reference materials or propose new ones relative to which stable isotope compositions should be reported. We propose DSM-3 for Mg, NIST SRM 915a for Ca, L-SVEC for Li and NBS28 for Si. Cadmium does not yet have a well identified delta zero material, although three commercial mono-elemental Cd solutions have yielded the same isotopic composition relative to one another. In order to scale the linearity of any mass spectrometer, some secondary reference materials are also proposed: Cambridge-1 solution for Mg, the "Münster-Cd" and JEPPIM Cd solutions for Cd and the "Big Batch" silicate for Si. The team from Nancy propose to prepare a mixed spike solution for Li isotopes. Well-characterised natural samples such as ocean or continental waters, diatoms, sponges, rocks and minerals are needed to validate the entire analytical procedure, particularly to take into account the effect of sample mineralisation and of chemical manipulations for elemental separation prior to analysis.     

Chemical composition of Russian Arctic precipitation in 2007-2015

The results of observations of the chemical composition of precipitation in the Russian Arctic in 2007-2015 are summarized including the data from NP-35 drifting ice station obtained in 2007-2008 in the framework of the joint program of Arctic and Antarctic Research Institute and Voeikov Main Geophysical Observatory. The qualitative and quantitative difference in the chemical composition of precipitation in the Atlantic, Siberian, and Pacific sectors of the Russian Arctic is revealed. It is found that the concentration of microelements (heavy metals) in precipitation at NP-35 ice station did not exceed 12% of total ions at the lowest mineralization. The comparative analysis is presented of the concentration of sulfate ions in precipitation in Norilsk and at NP-35 ice stations.     

The temple of apollo (Delphi) strengthens novel thermoluminescence dating method

The temple of Apollo in Delphi (Greece), built in 550 B.C., has been used to reconfirm a novel method of dating carved megalithic stone buildings using thermoluminescence (TL) (Liritzis, 1994). A calcitic (marble) sample was taken from the western side of the well-known inscribed polygonal wall, which constitutes the southern external support foundations of the temple. A partially bleached TL methodology was devised to determine first the ancient residual TL and then the correct archaeological dose. The obtained TL age of 420 ± 300 B.C. is compatible, within the margin of error, with the archaeological age. © 1997 John Wiley & Sons, Inc.     

Quantification of the environmental structural risk with spoiling ties: is randomization worthwhile?

Many recent works show that copulas turn out to be useful in a variety of different applications, especially in environmental sciences. Here the variables of interest are usually continuous, being times, lengths, weights, and so on. Unfortunately, the corresponding observations may suffer from (instrumental) adjustments and truncations, and eventually may show several repeated values (i.e., ties). In turn, on the one hand, a tricky issue of identifiability of the model arises, and, on the other hand, the assessment of the risk may be adversely affected. A possible remedy is to adopt suitable randomization procedures: here three different strategies are outlined. The goal of the work is to carry out a simulation study in order to evaluate the effects of the randomization of multivariate observations when ties are present. In particular, it is investigated whether, how, and to what extent, the randomization may change the estimation of the structural risk: for this purpose, a coastal engineering example will be used, as archetypical of a broad class of models and problems in engineering applications. Practical advices and warnings about the use of randomization techniques are hence given.     

Fractional Crystallization and Liquid Immiscibility Processes in the Alkaline-Carbonatite Complex of Juqui (So Paulo, Brazil)

The Juqui circular intrusion, which is Cretaceous in age (130–135Ma), crops out in the Precambrian gneissic basement in Brazilover an area of 14 km2. It consists of olivine clinopyroxen-itecumulates (with minor olivine gabbros) in the northeastern sector(74 vol.%), whereas ijolites-melteigites-urtites (4%) and nephelinesyenites with minor essexites and syenodiorites (21%) outlinesubannular concentric patterns with an Mg-carbonatite core (1%), in the southwestern part of the complex. Petrographical, bulk rock, and mineral compositional trendsindicate that the origin of the complex can be largely accountedfor by shallow-level fractional crystallization of a carbonatedbasanitic parental magma. Such a magma was generated deep inthe subcontinental lithosphere by low-degree partial meltingof a garnet-phlogopite peridotite source. Mass-balance calculations in agreement with field volume estimatespermit definition of several fractionation stages of the magmaticevolution under nearly closed-system conditions, with inwarddevelopment of zonally arranged side-wall cumulates. These stagesinvolved: (1) fractionation from basanite to essexite magma(liquid fraction F = 33–5%) by crystallization of olivineclinopyroxenite plus minor olivine alkali gabbro cumulates;(2) derivation of the least differentiated mafic nepheline syenite(F = 5–5 %) from essexitic magma by subtraction of a syenodioriteassemblage; (3) exsolution of a carbonatite liquid (5%) froma CO₂-enriched mafic nepheline syenite magma, which also underwentcontinuous fractionation giving rise to ijolite-melteigite-urtitecumulates. The proportion of cumulus clinopyroxene and biotiteand intercumulus nepheline and alkali feldspar in these lastrocks, as well as the absence of alkalis in carbonatite, maybe attributed, at least in part, to loss of alkali-rich hydrousfluids released during and after the unmixing formation of thetwo conjugate liquids. The KD values determined for Mg-carbonatite/nepheline syeniteare lower (1–4–2–9) for light rare earth elements(LREE) than for REE from Eu to Yb (4–6–7–8),in contrast to recent experimental results (Hamilton et al.,1989). A possible explanation is that Juquia Mg-carbonatiterepresents an alreadydifferentiated magma, which underwent extensivefractionation of LREE-enriched calcite. In this way, the highvariability of K₀ REE patterns observed in several alkaline-carbonatitecomplexes can also be accounted for. The remarkably constant initial ⁸⁷Sr/⁸⁶Sr ratios (mostly between0–7052 and 0–7057) support the interpretation ofthe intrusion as having been generated by fractrional crystallizationand liquid immiscibility from a common parental magma. Iligherisotopic ratios (0–7060–0–7078), found mainlyin dykes and in the border facies of the intrusion, may be dueto contamination by the gecissic basement.     

Cosmic‐ray rejection for single spectroscopic CCD images by means of template matching

This article describes a novel algorithm for cosmic‐ray rejection in single spectroscopic CCD images. This algorithm is based on a variation of template matching. It focuses on identifying those pixels belong to spectra, while other conventional algorithms tried to locate the cosmic‐ray hits directly. The main principle is applying template matching to find suspicious blocks, which is followed by surface patching to locate the legitimate pixels accurately. Therefore, the rest pixels are the ones corrupted by cosmic‐ray hits. Meanwhile, almost all the parameters are automatically extracted from the images. Examples of its performance are given for both simulated and observed images. It shows an advantage of significantly low false alarm rate with relatively high detection rate (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Pilot‐scale field validation of the long electrode electrical resistivity tomography method

A validation experiment, carried out in a scaled field setting, was attempted for the long electrode electrical resistivity tomography method in order to demonstrate the performance of the technique in imaging a simple buried target. The experiment was an approximately 1/17 scale mock‐up of a region encompassing a buried nuclear waste tank on the Hanford site. The target of focus was constructed by manually forming a simulated plume within the vadose zone using a tank waste simulant. The long electrode results were compared to results from conventional point electrodes on the surface and buried within the survey domain. Using a pole‐pole array, both point and long electrode imaging techniques identified the lateral extents of the pre‐formed plume with reasonable fidelity but the long electrode method was handicapped in reconstructing vertical boundaries. The pole‐dipole and dipole‐dipole arrays were also tested with the long electrode method and were shown to have the least favourable target properties, including the position of the reconstructed plume relative to the known plume and the intensity of false positive targets. The poor performance of the pole‐dipole and dipole‐dipole arrays was attributed to an inexhaustive and non‐optimal coverage of data at key electrodes, as well as an increased noise for electrode combinations with high geometric factors. However, when comparing the model resolution matrix among the different acquisition strategies, the pole‐dipole and dipole‐dipole arrays using long electrodes were shown to have significantly higher average and maximum values within the matrix than any pole‐pole array. The model resolution describes how well the inversion model resolves the subsurface. Given the model resolution performance of the pole‐dipole and dipole‐dipole arrays, it may be worth investing in tools to understand the optimum subset of randomly distributed electrode pairs to produce maximum performance from the inversion model.     

On the sampling of airborne measurements of radiative properties of cloud fields: Results from International Cirrus Experiment (ICE), 1987

Summary During the first pilot phase of the International Cirrus Experiment (ICE) in September/October 1987 radiation measurements were carried out above and below broken cloud fields over the German Bight. Analyses of the measurements of 25.9.1987 (broken cumulus cloud field) showed an unexpected high absorption of solar radiation but not those of 28.9.1987 (stratocumulus/stratus cloud field). This might be explained by a partial negligence of cloud side factor under the viewing geometry of the pyranometer and other reasons. The light guide effect (leakage) within holes can account for the depletion of cloud reflectance and the enhancement of cloud transmittance at large cloud cover, as observed during the measurements on 28.9.1987. The fluctuation of the irradiances, which can be characterized by the intermittency parameter, has been related to the corresponding cloud cover by a regression equation. On the condition of similarity, this scaling parameter derived from sample measurements could be extrapolated to that of the whole cloud field. Thus, the estimation of the irradiance spectrum for the whole cloud field may be possible, from samples taken with aircraft and imaging data.With 5 Figures