Evaluation of Fragments from Disc Cutting of Dry and Saturated Sandstone

As the use of mechanical excavation in tunneling and mining activities expands, so has the use of disc cutters in various ground conditions. The impact of moisture content on rock behavior and rock excavation by disc cutters is examined in this study. This was done through a series of full-scale cutting tests using a 292 mm (11.5 in.) disc cutter in a moderate strength sandstone. The muck from the cutting tests was used to determine coarseness index (CI) and absolute size constant (x′). x′ was calculated using Rosin–Rammler distribution (or Weibull) curve, a statistical technique to look at the fragmented rock products. This approach is very popular among the mineral-processing professionals for the evaluation of the particle sizes of the comminution products. x′ and CI show a reasonable correlation with the specific energy of cutting and production rate. Both of these indicators were found to be dependent on the cut spacing and the interaction between the adjacent cuts, as anticipated. This paper explains the background information on this topic, reviews the laboratory testing, and offers analysis of the results of grain size distribution and its relationship with specific energy and cutting geometry. It should be noted that the experimental program was limited to only one rock type and additional testing on the other rock types is required to expand the results of the current study.     

Geochemistry and fluid inclusions study of highly fractionated garnet-bearing granite of Gabal Abu Diab, central Eastern Desert of Egypt

The Neoproterozoic granite of Gabal Abu Diab, central Eastern Desert of Egypt, comprises mainly garnet-bearing granite and alkali feldspar granite intruded into calc-alkaline granodiorite–tonalite and metagabbro–diorite complexes. The garnet-bearing granite is composed mainly of plagioclase, K-feldspar, quartz, garnet and primary muscovite ± biotite. The presence of garnet and primary muscovite of Abu-Diab granite suggests its highly fractionated character. Geochemically, the garnet-bearing granite is highly fractionated as indicated from the high contents of SiO₂ (74.85–77.5%), alkalis (8.27 to 9.2%, Na₂O+K₂O) and the trace elements association: Ga, Zn, Zr, Nb and Y. This granite is depleted in CaO, MgO, P₂O₅, Sr and Ba. The alumina saturation (Shand Index, molar ratio A/CNK) of 1.0 to 1.1 indicates the weak peraluminous nature of this garnet-bearing granite. The geochemical characteristics of the Abu Diab garnet-bearing granite are consistent with either the average I-type or A-type granite and also suggest post-orogenic or anorogenic setting. A fluid inclusions study reveals the presence of three fluid generations trapped into the studied granite. The earlier is a complex CO₂–H₂O fluid trapped in primary fluid inclusions with CO₂ contents >?60 vol.%. These inclusions were probably trapped at minimum temperature >?400°C and minimum pressure >?2 kb. The second is immiscible water–CO₂ fluid trapped in secondary and/or pseudo-secondary inclusions. The trapping conditions were estimated at temperature between 400°C and 170°C and pressure between 900 and 2000 bar. The latest fluid is low-salinity aqueous fluid trapped in secondary two-phase and mono-phase inclusions. The trapping conditions were estimated at temperature between 90°C and 160°C and pressure <?900 bar. The origin of the early fluid generation is magmatic fluid while the second and third fluids are of hydrothermal and meteoric origin, respectively.     

Simulation of vortex-induced vibrations of a cylinder using ANSYS CFX

In this paper, vortex-induced vibrations of a cylinder are simulated by use of ANSYS CFX simulation code. The cylinder is treated as a rigid body and transverse displacements are obtained by use of a one degree of freedom spring damper system. 2-D as well as 3-D analysis is performed using air as the fluid. Reynolds number is varied from 40 to 16000 approx., covering the laminar and turbulent regimes of flow. The experimental results of （Khalak and Williamson, 1997） and other researchers are used for validation purposes. The results obtained are comparable.     

Seasonal Dynamics of Phytoplankton and Environmental Factors around the Chagwi-do off the West Coast of Jeju Island,Korea

The dynamics of phytoplankton abundance with seasonal variation in physicochemical conditions were investigated monthly at 10 stations around the Chagwi-do off the west coast of Jeju Island, Korea, including inshore, middle shore, and offshore in the marine ranching area from September 2004 to November 2005. Water temperature varied from 12.1 to 28.9°C (average 18.8°C), and salinity from 28.9 to 34.9 psu (average 33.7 psu). The chlorophyll a concentration was 0.02-2.05 μg L¹ (average 0.70 μg L¹), and the maximum concentration occurred in the bottom layer in April. A total of 294 phytoplankton species belonging to 10 families was identified: 182 Bacillariophyceae, 52 Dinophyceae, 9 Chlorophyceae, 12 Cryptophyceae, 6 Chrysophyceae, 4 Dictyophyceae, 13 Euglenophyceae, 6 Prymnesiophyceae, 5 Prasinophyceae, and 5 Raphidophyceae. The standing crop was 2.21-48.69x10⁴ cells L¹ (average 9.23x 10⁴ cells L¹), and the maximum occurred in the bottom layer in April. Diatoms were most abundant throughout the year, followed by dinoflagellates and phytoflagellates. A phytoplankton bloom occurred twice: once in spring, peaking in April, and once in autumn, peaking in November. The spring bloom was represented by fourChaetoceros species andSkeletonema costatum; each contributed 10–20% of the total phytoplankton abundance. The autumn bloom comprised dinoflagellates, diatoms, and phytoflagellates, of which dinoflagellates were predominant.Gymnodinium conicum, Prorocentrum micans, andP. triestinum each contributed over 10% of the total phytoplankton abundance.     

Removal of Bromate from Water Using De‐Acidite FF‐IP Resin and Determination by Ultra‐Performance Liquid Chromatography‐Tandem Mass Spectrometry

Contamination of water due to bromate is a severe health hazard. The aim of the present study was to remove bromate from water using a crosslinked polystyrene based strongly basic anion exchange resin De‐Acidite FF‐IP. Batch experiments were performed to study the influence of various experimental parameters such as effect of pH, contact time, temperature, and effect of competing anions on bromate removal by De‐Acidite FF‐IP resin. At optimum parameters, the removal rate of bromate was very fast and 90% removal took place in 5 min and equilibrium was established within 10 min. The presence of competitive anions reduced the bromate adsorption in the order of Cl^? > F^? > CO > SO > NO > PO. The practical utility of this resin has been demonstrated by removing bromate in some of the commercial bottled water from Saudi Arabia. The level of bromate was determined using a very sensitive, precise and rapid method based on ultra‐performance liquid chromatography‐tendem mass spectrometry (UPLC‐MS/MS).     

Vertical accuracy evaluation of freely available latest high-resolution (30 m) global digital elevation models over Cameroon (Central Africa) with GPS/leveling ground control points.

Digital Elevation Models (DEMs) contain topographic relief data that are vital for many geoscience applications. This study relies on the vertical accuracy of publicly available latest high-resolution (30?m) global DEMs over Cameroon. These models are (1) the ALOS World 3D-30?m (AW3D30), (2) the Shuttle Radar Topography Mission 1 Arc-Second C-Band Global DEM (SRTM 1) and (3) the Advanced Spaceborne Thermal Emission and Reflection Global DEM Version 2 (ASTER GDEM 2). After matching their coordinate systems and datums, the horizontal positional accuracy evaluation was carried out and it shows that geolocation errors significantly influence the vertical accuracy of global DEMs. After this, the three models are compared among them, in order to access random and systematic effects in the elevation data each of them contains. Further, heights from 555 GPS/leveling points distributed all over Cameroon are compared to each DEM, for their vertical accuracy determination. Traditional and robust statistical measures, normality test, outlier detection and removal were used to describe the vertical quality of the DEMs. The test of the normality rejected the hypothesis of normal distribution for all tested global DEMs. Overall vertical accuracies obtained for the three models after georeferencing and gross error removal in terms of Root Mean Square (RMS) and Normalized Median Absolute Deviation (NMAD) are: AW3D30 (13.06?m and 7.75?m), SRTM 1 (13.25?m and 7.41?m) and ASTER GDEM 2 (18.87?m and 13.30?m). Other accuracy measures (MED, 68.3% quantile, 95% quantile) supply some evidence of the good quality of AW3D30 over Cameroon. Further, the effect of land cover and slope on DEM vertical accuracy was also analyzed. All models have proved to be worse in the areas dominated by forests and shrubs areas. SRTM 1 and AW3D30 are more resilient to the effects of the scattering objects respectively in forests and cultivated areas. The dependency of DEMs accuracy on the terrain roughness is evident. In all slope intervals, AW3D30 is performing better than SRTM 1 and ASTER GDEM 2 over Cameroon. AW3D30 is more representative of the external topography over Cameroon in comparison with two others datasets and SRTM 1 can be a serious alternative to AW3D30 for a range of DEM applications in Cameroon.     

Bedload transport of small rivers in Malaysia

Numerous time-consuming equations, based on the relationship between the reliability and representativeness of the data utilized in defining variables and constants, require complex parameters to estimate bedload transport. In this study the easily accessible data including flow discharge, water depth, water surface slope, and surface grain diameter （ds0） from small rivers in Malaysia were used to estimate bedload transport. Genetic programming （GP） and artificial neural network （ANN） models are applied as complementary tools to estimate bed load transport based on a balance between simplicity and accuracy in small rivers. The developed models demonstrate higher performance with an overall accuracy of 97% and 93% for ANN and GP, respectively compared with other traditional methods and empirical equations.     

On the cratonization of the Arabian-Nubian Shield:Constraints from gneissic granitoids in south Eastern Desert,Egypt

The Shaitian granite complex(SGC) spans more than 80 Ma of crustal growth in the Arabian–Nubian Shield in southeast Egypt.It is a voluminous composite intrusion(60 km~2) comprising a host tonalite massif intruded by subordinate dyke-like masses of trondhjemite,granodiorite and monzogranite.The host tonalite,in turn,encloses several,fine-grained amphibolite enclaves.U-Pb zircon dating indicates a wide range of crystallization ages within the SGC(800 ± 18 Ma for tonalites;754 ± 3.9 Ma for trondhjemite;738 ± 3.8 Ma for granodiorite;and 717 ± 3.2 Ma for monzogranite),suggesting crystallization of independent magma pulses.The high positiveεNdi(+6–+8) indicate that the melting sources were dominated by juvenile material without any significant input from older crust.Application of zircon saturation geothermometry indicates increasing temperatures during the generation of melts from 745 ± 31 ℃ for tonalite to 810 ± 25 ℃ for trondhjemite;840 ± 10 ℃ for granodiorite;and 868 ± 10 ℃ for monzogranite.The pressure of partial melting is loosely constrained to be below the stability of residual garnet(10 kbar) as inferred from the almost flat HREE pattern((Gd/Lu)N= 0.9–1.1),but 3 kbar for the stability of residual amphibole as inferred from the significantly lower NbNand TaNcompared with LREENand the sub-chondrite Nb/Ta ratios exhibited by the granitic phases.The inverse relation between the generation temperatures and the ages estimates of the granitoid lithologies argue against a significant role of fractional crystallization.The major and trace element contents indicate the emplacement of the SGC within a subduction zone setting.It lacks distinctive features for melt derived from a subducted slab(e.g.high Sr/Y and high(La/Yb)Nratios),and the relatively low MgO and Ni contents in all granite phases within the SGC suggest melting within the lower crust of an island arc overlying a mantle wedge.Comparison with melts produced during melting experiments indicates an amphibolite of basaltic composition is the best candidate as source for the tonalite,trondhjemite and granodiorite magmas whereas the monzogranite magma is most consistent with fusion of a tonalite protolith.Given the overlapping Sm-Nd isotope ratios as well as several trace element ratios between monzogranite and tonalite samples,it is reasonable to suggest that the renewed basaltic underplating may have caused partial melting of tonalite and the emplacement of monzogranite melt within the SGC.The emplacement of potassic granite(monzogranite) melts subsequent to the emplacement of Na-rich granites(tonalitetrondhjemite-granodiorite) most likely suggests major crustal thickening prior arc collision and amalgamation into the over thickened proto-crust of the Arabian-Nubian shield.Eventually,after complete consolidation,the whole SGC was subjected to regional deformation,most probably during accretion to the Saharan Metacraton(arc–continent collisions) in the late Cryogenian-Ediacaran times(650–542 Ma).     

Characterizing the effect of elastic interactions on the effective elastic properties of porous,cracked rocks

Elastic interactions between pores and cracks reflect how they are organized or spatially distributed in porous rocks. The principle goal of this paper is to understand and characterize the effect of elastic interactions on the effective elastic properties. We perform finite element modelling to quantitatively study how the spatial arrangement of inclusions affects stress distribution and the resulting overall elasticity. It is found that the stress field can be significantly altered by elastic interactions. Compared with a non‐interacting situation, stress shielding considerably stiffens the effective media, while stress amplification appreciably reduces the effective elasticity. We also demonstrate that the T‐matrix approach, which takes into account the ellipsoid distribution of pores or cracks, can successfully characterize the competing effects between stress shielding and stress amplification. Numerical results suggest that, when the concentrations of cracks increase beyond the dilute limit, the single parameter crack density is not sufficient to characterize the contribution of the cracks to the effective elasticity. In order to obtain more reliable and accurate predictions for the effective elastic responses and seismic anisotropies, the spatial distribution of pores and cracks should be included. Additionally, such elastic interaction effects are also dependent on both the pore shapes and the fluid infill.     

Effects of Operational Parameters on Decolorization of C. I. Acid Red 88 by UV/H2O2 Process: Evaluation of Electrical Energy Consumption

In the present study, effects of operational parameters on the electrical energy consumption for photooxidative process (UV/H₂O₂) for the decolorization of C. I. Acid Red 88 (AR88) have been investigated. In a series of experiments, 20 mg L^?1 of AR88 solution were irradiated in the presence of different concentrations of H₂O₂ (to find out optimum amount of H₂O₂) by UV light intensity of 30 W m^?2 for certain irradiation times. The decolorization of the dye followed pseudo first‐order kinetics, and hence, the figure‐of‐merit electrical energy per order (E_EO) is appropriate for estimating the electrical energy efficiency. The electrical energy consumption was determined during the variation of some parameters such as initial H₂O₂ concentration, initial dye concentration, UV light intensity, pH, and the gap size of solution. Results showed that electrical energy could be reduced by optimizing operational parameters.