青藏铁路填土路基热-力耦合离散元研究

多年冻土是含有冰的特殊土体,在自然环境变化及工程扰动下易发生冻胀融沉变形,严重威胁着青藏高原工程建筑物的安全稳定,特别对青藏铁路的畅通运营提出了严峻挑战.以青藏铁路五道梁地区路基断面为研究对象,采用颗粒离散单元法,通过建立热-力离散元计算模型,对路基的温度场和变形进行了计算和预测.结果表明:离散单元法克服了有限元方法无...     

獐子岛养殖区夏季底层水温快速变化的机理分析

Rapid changes in the near-bottom water temperature are important environmental factors that can significantly affect the growth and development of species in the bottom culture. The object of this research is to investigate the mechanism causing these rapid changes within a bottom culture area near the Zhangzi Island. The hydrographic transects observations in the North Yellow Sea(NYS) suggest that our mooring station is very close to the tidal mixing front. The horizontal advection of the tidal front has induced the observed tidal change of bottom temperature at the mooring station. Analysis of the mooring near-bottom temperature and current measurements show that the angle between the tidal current horizontal advection and the swing of the tidal front is crucial in determining the variation trend of temperature. When the angle equals 90°, the horizontal tidal current advects along the isotherms so the temperature remains the same. When the angle is between 0° and 90°, the seawater moves from deep water to the warmer coastal zone and the temperature decreases. In contrast, the horizontal tidal advection moves the coastal warm water to the mooring station and the water temperature increases when the angle is between 90° and 180°. The amplitude of the temperature change is proportional to the magnitude of the horizontal temperature gradient and the tidal excursion in the direction of the temperature gradient. This study may facilitate the choice of culture area in order to have a good aquaculture production.     

微型近红外光谱仪测量北极积雪覆盖海冰内部太阳辐照度可行性研究

The extremely low temperature, high humidity and limited power supply pose considerable challenges when using spectrometers within the Arctic sea ice. The feasibility of using a miniature low-power near-infrared spectrometer module to measure solar radiation in Arctic sea ice environments was investigated in this study.Temperature and integration time dependences of the spectrometer module were examined over the entire target operating range of –50℃ to 30℃, well below the specified operating range of this spectrometer. Using these observations, a dark output prediction model was developed to represent dark output as a function of temperature and integration time. Temperature-induced biases in the saturation output and linear operating range of the spectrometer were also determined. Temperature and integration time dependences of the signal output were evaluated. Two signal output correction models were developed and compared, to convert the signal output at any temperature within the operating temperature range and integration time to that measured at the reference temperature and integration time. The overall performance of the spectrometer was evaluated by integrating it into a refined fiber optic spectrometry system and measuring solar irradiance distribution in the ice cover with thickness of 1.85 m in the Arctic during the 9th Chinese National Arctic Research Expedition. The general shape of the measured solar irradiance above the snow surface agreed well with that measured by other commercial oceanographic spectroradiometers. The measured optical properties of the sea ice were generally comparable to those of similar ice measured using other instruments. This approach provides a general framework for assessing the feasibility of using spectrometers for applications in cold environments.     

一种利用浮标站资料改进海浪模式有效波高预报的方法

基于浮标站海浪历史数据,利用回归分析方法建立了海浪数值模式有效波高预报产品的一元二次回归方程订正统计模型。通过2017年7月1日-2018年10月10日期间业务试运行结果发现:订正方程能有效改善有效波高数值预报产品的预报精度,且预报时效越短订正效果越显著。其中,第6~11 h预报时效内的订正前后平均绝对误差值减小0.17~0. 241 m,第6~18 h预报时效内订正前后均方根误差减小幅度为0.103~0. 28 m。这说明应用订正统计模型对海浪模式输出产品进行订正,也是改进海浪模式预报准确率的一种有效途径。     

Effect of nano-MgO on mechanical performance of cement stabilized silty clay

Abstract

A series of direct shear tests were performed on cement-admixed silty clay to investigate the effect of cement content and nano-magnesia (MgO) on its shear strength properties. For each normal stress, shear strength increased with cement content. However, an obvious increment in shear strength was achieved when the cement content was adjusted from 13% to 17%. Both cohesion and friction angle of cemented soil increased with cement content, and exponential function was adopted to correlate both the factors with cement content. For cement content of 10% investigated in this study, the optimum nano-MgO content was 10‰, wherein the cohesion could reach the peak value. The microstructure of the mixture revealed that the structure of the mixture was compacted for the optimum nano-MgO content. However, micro-cracks were formed when the amount of nano-MgO exceeded its optimum content.     

东昆仑祁漫塔格地区乌兰乌珠尔早古生代花岗岩锆石U-Pb年代学、地球化学及其地质意义

为确定东昆仑祁漫塔格乌兰乌珠尔地区片麻状黑云母花岗岩和二长花岗岩的形成时代、岩石成因、源区性质和构造背景,对该岩石样品进行了锆石U-Pb年代学、地球化学和锆石Hf同位素研究.结果显示:片麻状黑云母花岗岩加权平均年龄为457.5±2.3 Ma,铝饱和指数A/CNK介于0.98～1.02,属准铝质岩石,Na2O/K2O比值...     

高光谱遥感技术在基岩区区域地质调查填图中的应用

高光谱遥感以其超高的光谱维数据优势,使对地物的精细识别和区分能力较传统多光谱遥感数据有质的提升.以HyMap高光谱数据和高分五号高光谱数据为数据源,选择中国西部基岩区区域开展了高光谱遥感岩性-构造解译工作.通过图像增强处理后,对研究区地层单元、岩体/脉、构造等进行了遥感地质解译.对比已有的地质调查结果,发现高光谱遥感数...     

海洋经济红藻江蓠科的分类研究现状及存在的问题

江蓠科红藻是重要的经济海藻,用途十分广泛。然而,近年来受分子生物学技术引入等的影响,其分类学地位引起了极大争议。针对这个问题,本研究以争议比较大的江蓠属(Gracilaria)、拟江蓠(龙须菜)属(Gracilariopsis)和多穴藻属(Polycavernosa)为对象,总结归纳了其物种多样性、国内外研究进展、存在的问题、学者试图解答的问题以及部分自己的研究结果。以期为该类群的研究提供相对详细、客观的参考数据。     

基于大数据的极端暴雨事件下城市道路交通及人群活动时空响应

随着全球气候变化加剧,极端降雨增多,暴雨内涝灾害频发,严重威胁城市的可持续发展。快速掌握暴雨给城市交通及人群的影响,有助于提高灾害应急管理水平和事件响应能力。利用实时动态的交通路况信息和手机定位请求数据,通过一种融合STL时序分解技术与极端学生化偏差统计检验的时间序列异常探测方法,监测和分析暴雨内涝灾害事件中,城市道路交通和人群活动的时空响应特征,并以2018年7月16日发生在北京的极端暴雨事件为例开展实证研究。研究结果显示,在降雨集中的早、晚高峰两个时段（8—9时、18—19时）,市区的拥堵道路数量超出往常水平最高可达150%,异常检测分析显示拥堵道路数量和交通拥堵指数均达到异常甚至极端水平。人群活动的异常响应分析结果显示,暴雨事件引起定位请求量异常升高、异常点增多,且异常点的空间分布与1 h前的降雨量分布存在较高相关性。以上结果不仅证明了大数据及异常检测方法对于快速洞察暴雨事件对城市交通及人群影响的有效性,也为城市暴雨内涝灾害的应急响应与管理提供了新的技术手段。     

三元插层材料的合成及其在聚丙烯老化中的应用

以FeCl3?6H2O、NiCl2?6H2O、MgCl2?6H2O为原料,以NaOH为沉淀剂采用水热法合成了镁镍铁水滑石 (MgNiFe-LDH),通过X射线衍射 (XRD)、傅里叶变换红外光谱 (FTIR) 和扫描电镜 (SEM) 分析了MgNiFe-LDH结构及形貌,探讨了不同陈化时间和水热温度对MgNiFe-LDH合成的影响。将制得的MgNiFe-LDH添加至聚丙烯 (PP) 中,制备MgNiFe-LDH/PP复合材料,通过对材料的加速老化测其力学性能,研究了添加MgNiFe-LDH前后材料力学性能的差异。研究结果表明,当Mg2+:Ni2+:Fe3+=2:1:1,反应温度为140℃、陈化时间为24 h时,合成的MgNiFe-LDH为片状,形貌较为规整,颗粒粒径约为2μm;经加速老化后,填充MgNiFe-LDH 复合材料的抗老化性能优于纯PP,当MgNiFe-LDH的填充量为6 wt% 复合材料拉伸强度不变,可明显提高PP的抗老化性能。