Theoretical aspects of cap-rock and fault seals for single- and two-phase hydrocarbon columns

Cap-rock seals can be divided genetically into those that fail by capillary leakage (membrane seals) and those whose capillary entry pressures are so high that seal failure preferentially occurs by fracturing and/or wedging open of faults (hydraulic seals). A given membrane seal can trap a larger oil column than gas column at shallow depths, but below a critical depth (interval), gas is more easily sealed than oil. This critical depth increases with lower API gravity, lower oil GOR and overpressured conditions (for the gas phase). These observations arise from a series of modelling studies of membrane sealing and can be conveniently represented using pressure/ depth (P/D) profiles through sealed hydrocarbon columns. P/D diagrams have been applied to the more complex situation of the membrane sealing of a gas cap underlain by an oil rim; at seal capacity, such a two-phase column will be always greater than if only oil or gas occurs below the seal.These conclusions contrast with those for hydraulic seals where the seal capacity to oil always exceeds that for gas. Moreover, a trapped two-phase column, at hydraulic seal capacity will be less than the maximum-allowed oil-only column, but more than the maximum gas-only column. Unlike membrane seals, hydraulic seal capacity should be directly related to cap-rock thickness, in addition to the magnitude of the minimum effective stress in the sealing layer and the degree of overpressure development in the sequence as a whole.Fault-related seals are effectively analogous to membrane cap-rocks which have been tilted to the angle of the fault plane. Consequently, all of the above conclusions derived for membrane cap-rocks apply to both sealing faults sensu stricto (fault plane itself seals) and juxtaposition faults (hydrocarbon trapped laterally against a juxtaposed sealing unit). The maximum-allowed two-phase column trapped by a sealing fault is greater than for equivalent oil-only and gas-only columns, but less than that predicted for a horizontal membrane cap-rock under similar conditions. Where a two-phase column is present on both sides of a sealing fault (which is at two-phase seal capacity), a deeper oil/water contact (OWC) in one fault block is associated with a deeper gas/oil contact (GOC) compared with the adjacent fault block. If the fault seal is discontinuous in the gas leg, however, the deeper OWC is accompanied by a shallower GOC, whereas a break in the fault seal in the oil leg results in a common OWC in both fault blocks, even though separate GOC's exist. Schematic P/D profiles are provided for each of the above situations from which a series of fundamental equations governing single- and two-phase cap-rock and fault seal capacities can be derived. These relationships may have significant implications for exploration prospect appraisal exercises where more meaningful estimates of differential seal capacities can be made.The membrane sealing theory developed herein assumes that all reservoirs and seals are water-wet and no hydrodynamic flow exists. The conclusions on membrane seal capacity place constraints on the migration efficiency of gas along low-permeabiligy paths at depth where fracturing, wedging open of faults and/or diffusion process may be more important. Contrary to previous assertions, it is speculated that leakage of hydrocarbons through membrane seals occurs in distinct pulses such that the seal is at or near the theoretically calculated seal capacity, once this has been initially attained.Finally, the developed seal theory and P/D profile concepts are applied to a series of development geological problems including the effects of differential depletion, and degree of aquifer support, on sealing fault leakage, and the evaluation of barriers to vertical cross-flow using RFT profiles through depleted reservoirs. It is shown that imbibition processes and dynamic effects related to active cross-flow across such barriers often preclude quantitative analysis and solution of these problems for which simulation studies are usually required.     

Joint Soviet-Turkish expedition in the Black Sea

The hydrological and hydrochemical structures of the upper 300 m water column of the Black Sea in autumn 1988 have been studied. Regularities in the distribution of the physico-chemical characteristics in the zone of interaction between aerobic and anaerobic waters as well as the topography of the H₂S zone boundary and its connection with a certain density gradient have been found.Translated by Mikhail M. Trufanov.     

The hydrogen sulphide boundary in the Black Sea in the 1920s and 1980s

Maps of the boundary topography for anaerobic waters in the Black Sea are plotted for the summers of the 1920s and 1980s. The mean depths of the H₂S boundary for this period are determined. It is shown that the variation in the distribution and average location of the hydrogen sulphide zone has remained constant for the last 60 years.Translated by Mikhail M. Trufanov.     

The Mid-atlantic Ridge (31°S–34°30′S): Temporal and spatial variations of accretionary processes

The ridge located between 31° S and 34°30′S is spreading at a rate of 35 mm yr⁻¹, a transitional velocity between the very slow (≤20 mm yr⁻¹) opening rates of the North Atlantic and Southwest Indian Oceans, and the intermediate rates (60 mm yr⁻¹) of the northern limb of the East Pacific Rise, and the Galapagos and Juan de Fuca Ridges. A synthesis of multi-narrow beam, magnetics and gravity data document that in this area the ridge represents a dynamically evolving system. Here the ridge is partitioned into an ensemble of six distinct segments of variable lengths (12 to 100 km) by two transform faults (first-order discontinuities) and three small offset (< 30 km) discontinuities (second-order discontinuities) that behave non-rigidly creating complex and heterogeneous morphotectonic patterns that are not parallel to flow lines. The offset magnitudes of both the first and second-order discontinuities change in response to differential asymmetric spreading. In addition, along the fossil trace of second-order discontinuities, the lengths of abyssal hills located to either side of a discordant zone are observed to lengthen and shorten creating a saw-toothed pattern. Although the spreading rate remains the same along the length of the ridge studied, the morphology of the spreading segments varies from a deep median valley with characteristics analogous to the rift segments of the North Atlantic to a gently rifted axial bulge that is indistinguishable from the shape and relief of the intermediate rate spreading centers of the East Pacific Rise (i.e., 21°N). Like other carefully surveyed ridge segments at slow and fast rates of accretion, the along-axis profiles of each ridge segment are distinctly convex upwards, and exhibit along-strike changes in relief of 500m to 1500 between the shallowest portion of the segment (approximate center) and the segment ends. Such spatial variations create marked along-axis changes in the morphology and relief of each segment. A relatively low mantle Bouguer anomaly is known to be associated with the ridge segment characterized by a gently rifted axial bulge and is interpreted to indicate the presence of focused mantle upwelling (Kuo and Forsyth, 1988). Moreover, the terrain at the ends of each segment are known to be highly magnetized compared to the centers of each segment (Carbotte et al, 1990). Taken together, these data clearly establish that these profound spatial variations in ridge segment properties between adjoining segments, and along and across each segment, indicate that the upper mantle processes responsible for the formation of this contrasting architecture are not solely related to passive upwelling of the asthenosphere beneath the ridge axis. Rather, there must be differences in the thermal and mechanical structure of the crust and upper mantle between and along the ridge segments to explain these spatial variations in axial topography, crustal structure and magnetization. These results are consistent with the results of investigations from other parts of the ridge and suggest that the emplacement of magma is highly focused along segments and positioned beneath the depth minimum of a given segment. The profound differences between segments indicate that the processes governing the behavior of upwelling mantle are decoupled and the variations in the patterns of axis flanking morphology and rate of accretion indicate that processes controlling upwelling and melt production vary markedly in time as well. At this spreading rate and in this area, the accretionary processes are clearly three-dimensional. In addition, the morphology of a ridge segment is not governed so much by opening rate as by the thermal structure of the mantle which underlies the segment.     

Variability of the O2−H2S zone structure in the Black Sea: ‘Dramatic’ or mesoscale?

This paper discusses the conclusion derived during a joint U.S—Turkey expedition on the R/VKrorr on the dramatic variations of the O₂–H₂S zone in the Black Sea observed over the last 20 years. This conclusion is shown to be invalid since it was based on a comparison of data obtained at two stations only (in 1969 and 1988) that was made in various regions and in different seasons. Examples are provided for the inter-seasonal and mesoscale variations of hydrophysical and hydrochemical characteristics in the O₂–H₂S zone which, as to their scales, are comparable to or even exceed the variations registered during the expedition ofKrorr.Translated by Mikhail M. Trufanov.     

Modelling of the ecosystem of the Black-Sea shelf zone near the estuary of the Danube

We analyze the results of numerical calculations performed according to the three-dimensional interdisciplinary model of an ecological system of the Black-Sea shelf zone near the estuary of the Danube. The complete system of equations of hydrothermodynamics is solved together with transport equations of the advection-diffusion-reaction type used to describe the transformation of a substance (nitrogen) between the components of the characteristic vectors of the ecosystem: plankton, detritus, and biogenic elements (nitrates). We describe the distinctive features of the circumcontinental distribution of components obtained as a result of numerical experiments and present arguments for the conclusion that the ecosystem of the Danube estuary water area plays the role of a buffer zone between the press of the Danubian biogenic pollutions and the neighbouring areas of the shelf zone and open sea. Translated by Peter V. Malyshev and Dmitry V. Malyshev     

Stratigraphy of the sediment infill in Bosphorus Strait: water exchange between the Black and Mediterranean Seas during the last glacial Holocene

The sediment infill over the Paleozoic bedrock in the Bosphorus Strait consists of four sedimentary units which were deposited in the last 26,000 ¹⁴C years B.P. The stratigraphy of these units suggests that this part of the Bosphorus was a freshwater lake between 26,000 and 5,300 ¹⁴C years B.P., depositing sands with a freshwater mollusc fauna of Black Sea neo-euxinian affinity (Dreissena rostriformis, Dreissena polymorpha, and Monodacna pontica). The first appearance of euryhaline Mediterranean molluscs (e.g., Ostrea edulis, Mytilus edulis) was observed at 5,300 ¹⁴C years B.P. in this part of the Bosphorus. Deposition of coarse Mytilus-bank and Ostrea-bank units suggests that the establishment of the present dual-flow regime in the Bosphorus took place at about 4,400 ¹⁴C years B.P.     

Cytochrome P450 differences in normal and imposex-affected female whelk Buccinum undatum from the open North Sea

Normal and imposex-affected female Buccinum undatum were sampled from the open North Sea at three locations, one with low, and two with high shipping densities. Cytochrome P450 components and P450 aromatase activity were determined in the microsomal fractions isolated from pooled digestive gland/gonads. Cytochrome P450 aromatase activity was significantly higher (P < 0.05) in normal females collected in the low shipping density area (1,325 +/- 295 fmol/h/mg protein) than levels from imposex animals from a high shipping density area (620 +/- 287 fmol/h/mg protein). A negative correlation was found between aromatase activity and organotin body burden (r = -0.99). Levels of CYP450, cytochrome b5 and NADPH cytochrome c reductase activity did not show differences among groups. This is the first field evidence of depressed aromatase activity in imposex affected females, although additional research under laboratory controlled conditions is required to fully understand the mechanisms underlying the development of imposex in this species.