Nonextensive dust acoustic waves in a charge varying dusty plasma

Our recent analysis on nonlinear nonextensive dust-acoustic waves (DA) [Amour and Tribeche in Phys. Plasmas 17:063702, 2010] is extended to include self-consistent nonadiabatic grain charge fluctuation. The appropriate nonextensive electron charging current is rederived based on the orbit-limited motion theory. Our results reveal that the amplitude, strength and nature of the nonlinear DA waves (solitons and shocks) are extremely sensitive to the degree of ion nonextensivity. Stronger is the electron correlation, more important is the charge variation induced nonlinear wave damping. The anomalous dissipation effects may prevail over that dispersion as the electrons evolve far away from their Maxwellian equilibrium. Our investigation may be of wide relevance to astronomers and space scientists working on interstellar dusty plasmas where nonthermal distributions are turning out to be a very common and characteristic feature.     

The Constantine (northeast Algeria) earthquake of October 27, 1985: surface ruptures and aftershock study

An earthquake of magnitude M_s = 6.0 (CSEM, Strasbourg) occurred at Constantine (Algeria) on 27 October 1985. This seismic event is the strongest felt in the Tellian Atlas since the El Asnam seismic crisis of October 10, 1980. A team from the Centre de Recherche d'Astronomie, d'Astrophysique et de Géophysique (CRAAG, Algeria), utilising 8 portable stations, registered the activity a few days after the main shock. The aftershocks follow a N045° direction, and show the existence of three ruptured segments. Cross sections display a remarkable vertical fault plane and suggest asperities in the rupture process. Surface breaks were found affecting Quaternary deposits. The principal segment is about 3.8 km long showing “enéchelon” cracks with left-lateral displacement while the main direction of the rupture is N055°. Although the vertical motion is small, the northwestern block shows a normal component of the main surface faulting, while the left-lateral displacement is about 10 cm. The strike-slip focal mechanism solution determined from the global seismic network and field observations are in good agreement.     

Rapid analysis of risk assessment using developed simulation of chemical industrial accidents software package

The environmental consequences are defined as consequences of accidental release of hazardous substances to the natural environment. This release can lead to many hazards depending on the material stored. The consequences of these hazards to the environment are widespread and have significant importance to human communities living in the surroundings. The mathematical models are extremely useful tools to predict the impacts of chemical process accidents. The objective of this paper is to develop a software package for accident simulation and damage potential estimation. The software is coded in visual basic and is compatible with windows working environments. The software is called Simulation of chemical industrial accident. This application is a comprehensive software package which can be integrated with geographical information system to predict and display the consequence of chemical hazards. The software is a user-friendly and effective tool for evaluating the consequences of major chemical accidents, process decision making for land-use planning, namely locating suitable hazardous installations, hazardous waste disposal areas and emergency response plan.     

Comparison of approaches to spatial estimation in a bivariate context

The problem of estimating a regionalized variable in the presence of other secondary variables is encountered in spatial investigations. Given a context in which the secondary variable is known everywhere (or can be estimated with great precision), different estimation methods are compared: regression, regression with residual simple kriging, kriging, simple kriging with a mean obtained by regression, kriging with an external drift, and cokriging. The study focuses on 19 pairs of regionalized variables from five different datasets representing different domains (geochemical, environmental, geotechnical). The methods are compared by cross-validation using the mean absolute error as criterion. For correlations between the principal and secondary variable under 0.4, similar results are obtained using kriging and cokriging, and these methods are superior slightly to the other approaches in terms of minimizing estimation error. For correlations greater than 0.4, cokriging generally performs better than other methods, with a reduction in mean absolute errors that can reach 46% when there is a high degree of correlation between the variables. Kriging with an external drift or kriging the residuals of a regression (SKR) are almost as precise as cokriging.     

The LATEA metacraton (Central Hoggar, Tuareg shield, Algeria): behaviour of an old passive margin during the Pan-African orogeny

Historically, the Tuareg shield is divided into three parts bordered by mega-shear zones with the centre, the Central Polycyclic Hoggar, characterized by Archaean and Palaeoproterozoic lithologies. Nearly 10 years ago, the Tuareg shield was shown to be composed of 23 displaced terranes [Geology 22 (1994) 641] whose relationships were deciphered in Aïr to the SE [Precambr. Res. 67 (1994) 59]. The Polycyclic Central Hoggar terranes were characterized by the presence of well preserved Archaean/Palaeoproterozoic and Neoproterozoic lithologies.We show here that the terranes from Central Hoggar (Laouni, Azrou-n-Fad, Tefedest, Egéré-Aleksod) belonged to a single old passive margin, to which we gave the acronym name LATEA, which behaved as a craton during the Mesoproterozoic and the Early-Middle Neoproterozoic but was partly destabilized and dissected during the Late Neoproterozoic as a consequence of its involvement as a passive margin in the Pan-African orogen.An early Pan-African phase consisted of thrust sheets including garnet-bearing lithologies (eclogite, amphibolite, gneiss) that can be mapped and correlated in three LATEA terranes. In the Tin Begane area, P–T–t paths have been established from>15 kbar––790 °C (eclogite) to 4 kbar––500 °C (greenschist retrogression) through 12 kbar––830 °C (garnet amphibolite) and 8 kbar––700 °C (garnet gneiss), corresponding to the retrograde path of a Franciscan-type loop. Sm–Nd geochronology on minerals and laser ablation ICP-MS on garnet show the mobility of REE, particularly LREE, during the retrograde greenschist facies that affects, although slightly, some of these rocks. The amphibolite-facies metamorphism has been dated at 685 ± 19 Ma and the greenschist facies at 522 ± 27 Ma. During the thrust phase, the Archaean–Palaeoproterozoic basement was only locally affected by the Pan-African tectonics. LATEA behaved as a craton. Other juvenile terranes were also thrust early onto LATEA: the Iskel island arc at ≈850 Ma to the west of LATEA, the Serouenout terrane in the 700–620 Ma age range to the east. No subduction-related magmas have intruded LATEA during this epoch, which behaved as a passive margin.During the main Pan-African phase (625–580 Ma), LATEA was dissected by mega-shear zones that induced several hundreds km of relative displacement and allowed the emplacement of high-K calc-alkaline batholiths. Smaller movements continued till 525 Ma, accompanied by the emplacement of subcircular plutons with alkaline affinity. Here is dated the Ounane granodiorite (624 ± 15 Ma; ⁸⁷Sr/⁸⁶Sr_i=0.70839 ± 0.00016; 6WR, MSWD=0.87) and the Tisselliline granite (552 ± 15 Ma; ⁸⁷Sr/⁸⁶Sr_i=0.7074 ± 0.0001; 5WR, MSWD=1.4). Nd isotopes indicate a preponderant Palaeoproterozoic crustal source for these two plutons: _Nd=−14 to −21 at 624 Ma and T_DM=1650–2320 Ma for Ounane and _Nd=−13 to −15 at 555 Ma and T_DM=1550–1720 Ma for Tisselliline. Our model links these intrusions to a linear lithospheric delamination along mega-shear zones, allowing the hot asthenosphere to rise, melt by adiabatic pressure release and inducing the melting of the Palaeoproterozoic and Archaean lower crust.The LATEA cratonic microcontinent remained however sufficiently rigid to preserve Archaean and Palaeoproterozoic lithologies as well as Middle Neoproterozoic oceanic thrust sheets. This corresponds to the notion of metacraton [J. African Earth Sci. 34 (2002) 119], i.e. a craton that has been remobilized during an orogenic event but is still recognizable dominantly through its rheological, geochronological, isotopic and sometimes petrological characteristics.     

Wave climate simulation for southern region of the South China Sea

This study investigates long-term variability and wave characteristic trends in the southern region of the South China Sea (SCS). We implemented the state-of-the art WAVEWATCH III spectral wave model to simulate a 31-year wave hindcast. The simulation results were used to assess the inter-annual variability and long-term changes in the SCS wave climate for the period 1979 to 2009. The model was forced with Climate Forecast System Reanalysis winds and validated against altimeter data and limited available measurements from an Acoustic Wave and Current recorder located offshore of Terengganu, Malaysia. The mean annual significant wave height and peak wave period indicate the occurrence of higher wave heights and wave periods in the central SCS and lower in the Sunda shelf region. Consistent with wind patterns, the wave direction also shows southeasterly (northwesterly) waves during the summer (winter) monsoon. This detailed hindcast demonstrates strong inter-annual variability of wave heights, especially during the winter months in the SCS. Significant wave height correlated negatively with Niño3.4 index during winter, spring and autumn seasons but became positive in the summer monsoon. Such correlations correspond well with surface wind anomalies over the SCS during El Nino events. During El Niño Modoki, the summer time positive correlation extends northeastwards to cover the entire domain. Although significant positive trends were found at 95 % confidence levels during May, July and September, there is significant negative trend in December covering the Sunda shelf region. However, the trend appears to be largely influenced by large El Niño signals.     

Micro-CT and FIB–SEM imaging and pore structure characterization of dolomite rock at multiple scales

With improvements of imaging techniques and computational power, Digital Rock Physics (DRP) has been increasingly used to determine transport and elastic properties of reservoir core plugs. Since numerical computations highly rely on accurate 3D representations of the porous microstructure of the rocks, the imaging technique and the scale at which the imaging is performed is a critical parameter. In this paper, we introduce a multiscale imaging workflow that uses both micro-X-ray tomography (micro-XCT) and focused ion beam combined with scanning electron microscope (FIB–SEM) to characterize a dolomite rock from the microscale to the nanoscale. This allows for the accurate capture of the different heterogeneities that exist in the carbonate (texture, mineralogy, pore size). The reconstructed microporous structures were then used to successfully predict elastic and permeability properties of selected carbonate.     

Malaysian fisheries policy : Search for new grounds

Past fisheries development policies in Malaysia are assessed and new grounds for managing the Malaysian fisheries are explored. Some incompatibility in the goals for fishery development are discerned, especially those of increasing domestic landings through mechanization and resource conservation. Future management efforts should be based on a fuller understanding of the fishery stock and regional management of fish stocks. Aquaculture is often seen as a plausible alternative in order to augment supplies from the capture fisheries. A comprehensive multidisciplinary approach is needed to transform and commercialize traditional, experience-dependent culture systems into technology-packaged systems based on scientific methods. There is also substantial potential for the development of recreational fisheries.     

Dimensional Reduction of Pattern-Based Simulation Using Wavelet Analysis

A pattern-based simulation technique using wavelet analysis is proposed for the simulation (wavesim) of categorical and continuous variables. Patterns are extracted by scanning a training image with a template and then storing them in a pattern database. The dimension reduction of patterns in the pattern database is performed by wavelet decomposition at certain scale and the approximate sub-band is used for pattern database classification. The pattern database classification is performed by the k-means clustering algorithm and classes are represented by a class prototype. For the simulation of categorical variables, the conditional cumulative density function (ccdf) for each class is generated based on the frequency of the individual categories at the central node of the template. During the simulation process, the similarity of the conditioning data event with the class prototypes is measured using the L ₂-norm. When simulating categorical variables, the ccdf of the best matched class is used to draw a pattern from a class. When continuous variables are simulated, a random pattern is drawn from the best matched class. Several examples of conditional and unconditional simulation with two- and three- dimensional data sets show that the spatial continuity of geometric features and shapes is well reproduced. A comparative study with the filtersim algorithm shows that the wavesim performs better than filtersim in all examples. A full-field case study at the Olympic Dam base metals deposit, South Australia, simulates the lithological rock-type units as categorical variables. Results show that the proportions of various rock-type units in the hard data are well reproduced when similar to those in the training image; when rock-type proportions between the training image and hard data differ, the results show a compromise between the two.