Mitigating the effects of sand dunes on seismic data from the Rub al Khali basin,Saudi Arabia

The Rub Al Khali region in Saudi Arabia is characterized by the presence of sand dunes separated by salt flats, also called Sabkhas. In general, the elevation of dunes in this region varies between 90 and 250 m above sea level. The presence of these sand dunes, along with the rapidly changing surface topography poses challenges for seismic data acquisition and processing. The high contrast in acoustic impedance between the dune base and the underlying formation often results in amplification of seismic waves that are recorded at stations located on the surface of sand dunes. Attempts to address the issue using conventional surface-consistent amplitude scaling methods without reducing these amplification effects generally fail, thus compromising the suitability of the processed data for amplitude versus offset analysis. In this study, we propose a new reference site technique to reduce the effects of sand dune amplification, enabling the production of data sets that are suitable for amplitude versus offset processing. The proposed technique uses a deterministic approach to derive surface-consistent, frequency-dependent de-amplification functions for shots and stations located on the dunes only. Two-dimensional synthetic and field data examples show that the technique significantly reduces the effects of sand dune amplification.     

Petrogenesis of the ü?kap?l? Granitoid and its Mafic Enclaves in Elmal? Area (Ni?de, Central Anatolia, Turkey)

The Late Cretaceous ükapili Granitoid including mafic microgranular enclaves intruded into metapelitic and metabasic rocks, and overlain unconformably by Neogene ignimbrites in the Ni de area of Turkey. It is mostly granite and minor granodiorite in composition, whereas its enclaves are dominantly gabbro with a few diorites in composition. The ükapili Granitoid is composed mainly of quartz, K-feldspar, plagioclase, biotite, muscovite and minor amphibole while its enclaves contain mostly plagioclase, amphibole, minor pyroxene and biotite. The ükapili Granitoid has calcalkaline and peraluminous (A/CNK= 1.0-1.3) geochemical characteristics. It is characterized by high LILE/HFSE and LREE/HREE ratios ((La/Lu) N = 3-33), and has negative Ba, Ta, Nb and Eu anomalies, resembling those of collision granitoids. The ükapili Granitoid has relatively high 87Sr/86Sr (i) ratios (0.711189-0.716061) and low εNd (t) values (-5.13 to -7.13), confirming crustal melting. In contrast, the enclaves are tholeiitic and metaluminous, and slightly enriched in LILEs (K, Rb) and Th, and have negative Ta, Nb and Ti anomalies; propose that they were derived from a subduction-modified mantle source. Based on mineral and whole rock chemistry data, the ükapili granitoid is H-(hybrid) type, post-collision granitoid developed by mixing/mingling processes between crustal melts and mantle-derived mafic magmas.     

Site classification of Turkish national strong-motion stations

Since 1973, the General Directorate of Disaster Affairs of Turkey has deployed several strong-motion accelerographs at selected sites. Within the framework of the project entitled Compilation of National Strong Ground Motion Database in Accordance with International Standards, site conditions were investigated within the upper 30-m depth by surface seismic and standard penetration tests. Preliminary characterization of the sites is made by making use of both geophysical and geotechnical criteria of NEHRP Provisions and Eurocode-8 site classification systems. The liquefaction susceptibility of those sites which comprise saturated cohesionless deposits is also determined. Mean shear-wave velocity, mean penetration resistance, site class, and liquefaction susceptibility of each site are tabulated. The Turkish strong-motion database supplemented by detailed information on site conditions is a valuable source of information particularly for those studies that put emphasis on the relationship between site conditions and strong-motion parameters.     

A Time Monte Carlo method for addressing uncertainty in land-use change models

One of the main objectives of land-use change models is to explore future land-use patterns. Therefore, the issue of addressing uncertainty in land-use forecasting has received an increasing attention in recent years. Many current models consider uncertainty by including a randomness component in their structure. In this paper, we present a novel approach for tuning uncertainty over time, which we refer to as the Time Monte Carlo (TMC) method. The TMC uses a specific range of randomness to allocate new land uses. This range is associated with the transition probabilities from one land use to another. The range of randomness is increased over time so that the degree of uncertainty increases over time. We compare the TMC to the randomness components used in previous models, through a coupled logistic regression-cellular automata model applied for Wallonia (Belgium) as a case study. Our analysis reveals that the TMC produces results comparable with existing methods over the short-term validation period (2000–2010). Furthermore, the TMC can tune uncertainty on longer-term time horizons, which is an essential feature of our method to account for greater uncertainty in the distant future.     

Source Based Characterization and Pollution Profile of a Baker's Yeast Industry

Baker's yeast industry has significant effects on environment due to significant water consumption and high strength wastewater production. Effluents from baker's yeast industry are characterized by high concentrations of biological oxygen demand (BOD₅), chemical oxygen demand (COD), total Kjeldahl nitrogen (TKN), total dissolved solids (TDS), sulfate, and dark brown color. The aim of this study is to provide a detailed quantitative and qualitative identification and characterization of the wastewater sources from different processes of a baker's yeast industry. It is identified that the most polluted wastewater components of the facility are coming from rotary drum filter and evaporation process. However, the highest pollution loads is identified as tank and equipment cleaning effluent due to very high flow rate from this source. The efforts should be on the way to minimize the water usage for the tank and equipment cleaning process, and to recycle less polluted waste streams back to the process.     

Assessment of sediment yield estimations for large watershed areas: a case study for the Seyhan,Demirköprü and Hirfanlı reservoirs in Turkey

Abstract

Analyses of data from reservoir surveys and sediment rating curves are compared to predict sediment yield in three large reservoir watershed areas in Turkey. Sediment yield data were derived from reservoir sedimentation rates and suspended sediment measurements at gauging stations. The survey data were analysed to provide the volume estimates of sediment, the time-averaged sediment deposition rates, the long-term average annual loss rates in the reservoir storage capacity, and the long-term sediment yield of the corresponding watershed areas. Four regression methods, including linear and nonlinear cases, were applied to rating curves obtained from gauging stations. Application of the efficiency test to a power function form of a rating curve with nonlinear regression yielded the highest efficiency values. Based on the analysis of the sediment rating curves, sediment load fluxes were calculated by using average daily discharge data at each gauging station. Comparison of these two sediment yield values for each reservoir showed that the sediment yields from the suspended sediment measurements, SY_GS, are 0.99 to 3.54 times less than those obtained from the reservoir surveys, SY_RS. The results from the reservoir surveys indicate that all three reservoirs investigated have lost significant storage capacity due to high sedimentation rates.     

Types and nature of fracture associated with Late Ordovician paleochannels of glaciofluvial Sarah Formation,Qasim region,Central Saudi Arabia

This study evaluates the Late Ordovician glaciofluvial deposits of the Sarah Formation and equivalent outcroppings in north, central, and southwestern Saudi Arabia. The Sarah Formation also covers a wide area in the subsurface and is considered as an important target for unconventional tight gas reservoir. Defining the fracture types, nature, and distribution in outcrop scale might help to establish a successful fracture simulation model and behavior for the Sarah tight gas reservoir in the subsurface. This study investigates fracture characteristics for the Sarah Formation at Sarah paleochannel outcrops. The study revealed three sets of fractures, which have EW, NS, and SE-NW directions, and these fractures vary from open, resistive, and filled to resistive fractures. The closed fractures are filled with ferruginated iron oxides and gypsum. The filled fractures (the thrust boundary) are found in the study area at the SE-NW strike fracture set, while open and resistive fractures are found mainly at S-N and E-W fracture sets, respectively. The syn-depositional filled fractures (iron oxides) are considered as the younger fracture sets while the open and resistive fractures are post-depositional fractures which may have resulted from uplift or tectonic movement. A general model representing the fracture pattern and the thrusting boundaries due to glacial movement was constructed. It has been noticed that the systematic occurrence of filled fractures (thrust boundaries) described the boundaries between different glacial events, which act as a fluid barrier (filled fractures) and decrease the reservoir quality. The finding of this study might be utilized as a guide and lead for exploration in the subsurface Sarah glacial deposits. It will also help to understand and speculate the nature pattern and distribution of fractures with the Sarah Formation.     

Correction to: Calibration of Genetic Algorithm Parameters for Mining-Related Optimization Problems

Natural Resources Research - The original version of this article unfortunately contained a mistake in figures. The source file for figures was submitted and published incorrectly; hence, the...     

Finite Element Modeling of Swelling Soil Pressures Using Joint/Interface Elements

There could be some discontinuities in a soil media such as layers, earth structures, cracks, and fissures so that estimation of stresses and deformations in these types of soil masses are somewhat different from continuous masses. The discontinuities in a soil mass could be considered as a special link between two blocks. Transmitted swelling pressures affected by the soil properties of the backfill especially at the interface between the backfill and retaining wall. In order to estimate the transmitted swelling pressure distribution behind a retaining wall, using with interface element, a new finite element model and a code (SWELPRES) have been developed. To evaluate the effect of backfill characteristics and interface element from the transmitted lateral swelling pressures, four cases of thickness of backfills with or without interface elements are investigated.