Reduced-Dimensional Processing for Ground Moving Target Detection in Distributed Space-Based Radar

With multisatellite radar systems, several additional features are achieved: multistatic observation, interferometry, ground moving target indication (GMTI). In this letter, a new reduced-dimensional method based on joint pixels sum-difference (Sigma-Delta) data for clutter rejection and GMTI is proposed. The reduced-dimensional joint pixels Sigma-Delta data are obtained by the orthogonal projection of the joint pixels data of different synthetic aperture radar (SAR) images generated by a multisatellite radar system. In the sense of statistic expectation, the joint pixels Sigma-Delta data contain the common and different information among SAR images. Then, the objective of clutter cancellation and GMTI can be achieved by adaptive processing. Simulation results demonstrate the effectiveness and robustness of the proposed method even with clutter fluctuation and image coregistration errors     

A thin orogenic wedge upon thick foreland lithosphere and the missing foreland basin

Along the Caledonian front in central Scandinavia, the expected peripheral or pro-foreland basin is neither physically present nor are there any significant traces in the sedimentary record. In order to explain and quantify this situation, the authors assess the major geometric and mechanical constraints on the Caledonian orogenic wedge and model the orogenic load and its influence on the foreland lithosphere of Baltica. Geologic and geophysical data show a strong foreland lithosphere with a flexural parameter (α) of approximately 100 km. The shape of the orogenic wedge and its critical taper angle are dependent mainly on basal friction and wedge strength. In the external part organic-rich black shales provide a low-friction horizon both at the basal detachment surface and within the wedge itself. The more internal part of the wedge is composed of metamorphic and crystalline rocks, which cooled and strengthened prior to thrusting. As a result, the external part of the wedge had a lower strength and a smaller critical taper angle than its internal part, so the orogenic load is upward concave. Modelling of the effect of such a load on the Baltica lithosphere shows a very small depression in front of the load (2 km). The flexural depression produced by the main part of the orogenic load is filled up by the thickening thrust-and-fold belt, so that there is little space left for a foreland basin. These results imply that the missing foreland basin in front of the central Scandinavian Caledonides is not due to subsequent erosion, but is a primary feature.     

Current changes of the lower troposphere temperature in the Moscow region

Modern climatic changes for 1991–2013 in the lower 4-km layer of the atmosphere in the Moscow region are discussed based on long-term measurements using radiosondes in Dolgoprudny near Moscow and sensors installed on a high mast in Obninsk and on a television tower in Ostankino in Moscow. It is shown that at the end of the 20th century and the beginning of the 21st century the mean-annual air temperature at all heights from 2 to 4000 m increased by an average of 0.1°C per year. In recent years, the warming has slowed. Over the last two decades, long-term changes were multidirectional, depending on the season: warming in May–December, cooling in January–February, and no statistically significant changes in March and April. The probable reason for the temperature decrease in the middle of the cold period is changes in the large-scale atmospheric circulation during recent years (the negative phase of the North Atlantic Oscillation in early 2010s). In recent years, the Moscow region climate continentality has increased because of warming in summer and cooling in winter, despite the secular decreasing trend, which was noted before. Mean daily and annual warming rates in Dolgoprudny were higher than in Obninsk. The probable reason is the northward construction expansion and the strengthening of the Moscow heat island. The highest annual temperature amplitude is recorded at heights of 200–300 m.     

Water status in winter wheat grown under salt stress

1 IntroductionSalinization is one of the major problems in arid and semi-arid regions in relation to land use and in particular to agricultural production[1]. Excessive salinity leads to toxicity in crops and reduction of the availability of water to crops, by reducing the osmotic potential of the soil solution[2]. Movement of soil water induces solute transport, and solutes are transferred towards the ground surface by the upward soil-water movement caused by evaporation, resulting in an accu…     

Stable isotope analysis of carbon and nitrogen in angrites

Angrites are a small group of ancient basaltic achondrites, notable for their unusual chemistry and extreme volatile depletion. No comprehensive study of indigenous light elements currently exists for the group. Measurement of the abundances and isotopic composition of carbon and nitrogen could provide information pertaining to the evolution of the angrite parent body. Bulk‐sample stepped combustion analyses of five angrites and a glass separate from D'Orbigny were combined with earlier data and acid dissolution experiments of carbonates found in D'Orbigny to compile an inventory of indigenous carbon and nitrogen. Indigenous carbon combusted between 700 °C and 1200 °C, with abundances of 10–140 ppm and a mass‐weighted δ¹³C of ?25 to ?20‰ with the exception of D'Orbigny (δ¹³C approximately ?5‰). Nitrogen was released at 850–1200 ºC, 1–20 ppm with a δ¹⁵N ?3‰ to +4‰; again, D'Orbigny (δ¹⁵N approximately +20 to +25‰) was an exception. We interpret these components as largely indigenous and decoupled; the carbon in graphitic or amorphous form, while the nitrogen is present as a dissolved component in the silicates. No relationship with the textural sub‐classification of angrites is apparent. We suggest that the angrite parent body contains a reservoir of reduced carbon and thus may have undergone a change in redox conditions, although the timing and mechanism for this remain unclear.     

Large debris avalanches and associated eruptions in the Holocene eruptive history of Shiveluch Volcano, Kamchatka, Russia

 Shiveluch Volcano, located in the Central Kamchatka Depression, has experienced multiple flank failures during its lifetime, most recently in 1964. The overlapping deposits of at least 13 large Holocene debris avalanches cover an area of approximately 200 km² of the southern sector of the volcano. Deposits of two debris avalanches associated with flank extrusive domes are, in addition, located on its western slope. The maximum travel distance of individual Holocene avalanches exceeds 20 km, and their volumes reach ∼3 km³. The deposits of most avalanches typically have a hummocky surface, are poorly sorted and graded, and contain angular heterogeneous rock fragments of various sizes surrounded by coarse to fine matrix. The deposits differ in color, indicating different sources on the edifice. Tephrochronological and radiocarbon dating of the avalanches shows that the first large Holocene avalanches were emplaced approximately 4530–4350 BC. From ∼2490 BC at least 13 avalanches occurred after intervals of 30–900 years. Six large avalanches were emplaced between 120 and 970 AD, with recurrence intervals of 30–340 years. All the debris avalanches were followed by eruptions that produced various types of pyroclastic deposits. Features of some surge deposits suggest that they might have originated as a result of directed blasts triggered by rockslides. Most avalanche deposits are composed of fresh andesitic rocks of extrusive domes, so the avalanches might have resulted from the high magma supply rate and the repetitive formation of the domes. No trace of the 1854 summit failure mentioned in historical records has been found beyond 8 km from the crater; perhaps witnesses exaggerated or misinterpreted the events. Received: 18 August 1997 / Accepted: 19 December 1997     

Geological characteristics of 2011 Japan tsunami sediments deposited along the coast of southwestern Mexico

The tsunami of 11th March 2011 was originated at the east coast of Japan and deposited ca.1 cm thick sediment layer along the coast of southwestern Mexico up to a maximum distance of 320 m from the beach. The sedimentological, mineralogical and geochemical characteristics of the sediments deposited during the tsunami (JT) are compared with the pre-tsunami sediments (PRT). JT sediments consist of dominant coarser fractions (>54% of medium to coarse sand), whereas PRT deposits comprise abundant finer fractions (>58% of fine sand). Assemblage of mafic and heavy minerals suggests similar provenance for both. The higher abundance and variation of heavy minerals along with higher concentrations of bromine (Br) and sodium (Na) in the JT deposits reveal the influence of high energy sea waves in transportation of heavy mineral rich coarse sediments onto the coastal lowlands.     

Use of traveltime skips in refraction analysis to delineate velocity inversion1

First arrival refraction data does not normally provide any indication of the velocity inversion problem. However, under certain favourable circumstances, when the low-velocity layer (LVL) is considerably thicker than the overlying higher-velocity layer (HVL), the velocity inversion can be seen in the form of a traveltime skip. Model Studies show that in such cases the length of the HVL traveltime branch can be used to determine the thickness of the HVL and the magnitude of the traveltime skip in order to determine the thickness of the LVL. This is also applicable in the case of field data.     

Large-scale dune erosion tests to study the influence of wave periods

Large-scale physical model tests were performed to quantify the effects of the wave period on dune erosion. Attention was focussed on 2D cross-shore effects in a situation with sandy dunes and extreme water levels and wave conditions. Besides profile measurements, detailed measurements in time and space of water pressure, flow velocities and sediment concentrations were performed in the near near-shore area. It was concluded that a longer wave period leads to a larger dune erosion volume and to a larger landward retreat of the dune face. Tests with double-peaked wave spectra showed that the influence of the spectral shape on dune erosion was best represented by the T_m − 1,0 spectral mean wave period, better than the peak wave period, T_p. The effect of the wave period on dune erosion was implemented in a dune erosion prediction method that estimates erosion volumes during normative storm conditions for the Dutch coast. More details of the measurements and additional analyses of physical processes are described in an accompanying paper by Van Thiel de Vries et al. [Van Thiel de Vries, J.S.M., van Gent, M.R.A., Reniers, A.J.H.M. and Walstra, D.J.R., submitted for publication. Analysis of dune erosion processes in large scale flume experiments, In this volume of Coastal Engineering.].