Assessing seismic response of a 2D roller-compacted concrete dam under variable reservoir lengths

Finite element method (FEM) is effectively used for evaluating roller-compacted concrete (RCC) dams, especially in high seismicity zones. The aim of this study is to investigate the effect of various reservoir lengths on the seismic response of a selected RCC dam under strong ground motion effects. Six different reservoir lengths, the lengths varies from h/2 to 10h (h, the height of dam), are used within finite element models. The hydrodynamic pressure of the reservoir water is modelled with the 2D fluid finite elements based on the Lagrangian approach. The horizontal and vertical components of the 1989 Mw 6.9 Loma Prieta earthquake are utilized in numerical analyses. The non-linear time-history analyses of those six models are investigated by using Drucker-Prager material model. According to the numerical analysis, it is obvious that the seismic behavior of the RCC dams is considerably dependent on the reservoir length. By increasing the length, we have obtained higher displacement values, which exist until the reservoir length reaches the 3h; at increased lengths, the values remain stable. This result proposes that 3h reservoir length is adequate to assess the seismic response of RCC dams. The principal tensile stresses are relatively lower in non-linear analysis compared to linear analyses. However, the principal compression stresses are close to each other in linear and non-linear analyses. The results imply that the non-linear response is influential on the total seismic response of a dam, which cannot be neglected in numerical analysis.     

Water balance and water quality in the Çürüksu basin, western Turkey

The purpose of this study is to determine the hydrological properties, groundwater potential, and water quality of the Çürüksu basin, western Turkey, and to contribute to the efforts of providing an adequate water supply for the city of Denizli. To achieve these objectives, the study consisted of mapping the geology and hydrogeology, determining the water balance, and defining the water quality. The basement rock units in the study area include several impervious metamorphic rock types and Mesozoic karstic limestone, which are overlain by Oligocene fluvial and lacustrine strata, Pliocene travertine and limestone, and Quaternary alluvium. The karstic limestone and the travertine and limestone strata constitute potential aquifers in the Çürüksu basin. The discharge regimes of the 22 springs in the two basins show little change through the year. The flow systems of the springs also have a large storage capacity and drainage occurs very slowly. The discharge of the springs does not appear to be affected immediately by monthly variations in precipitation. According to the water balance, the precipitation in the Çürüksu basin cannot provide all of the measured surface runoff. Excess runoff is 2?m3?s–1 in the Çürüksu basin, and in the adjacent Gökp?nar basin the deficit in surface runoff is also 2?m3?s–1. Thus, the underground catchment area of the springs extends beyond the surface drainage area of the Çürüksu basin. Although the P?narba??, Kazanp?nar, and Böceli springs emerge from the karstic limestone aquifer in the Çürüksu basin, these springs are fed from the adjacent Gökp?nar basin. The spring waters emerging from karstic limestone are fresh, of the calcium bicarbonate type, soft, and potable. The spring waters emerging from the travertine and limestone aquifer are low-temperature, brackish, of the calcium sulfate type, very hard, and not potable but useful for the irrigation. The occurrences of coal strata and hydrothermal activity have caused some deterioration of groundwater quality.     

Comparison of Treatment Efficiency and Energy Consumption of Batch and Continuous Electrocoagulation in Urban Wastewater

In this study, domestic wastewater was used as the electrolyte. The work was carried out with an up-flow tubular reactor, made of stainless steel that was used as cathode, while the anode electrode material was aluminum and varying values of flow regime (25, 50, 75 and 100 mL/s for continuous system), initial pH value (5, 6, 7 and 7.8) and current intensity (10, 15 and 20 A) were applied. For domestic wastewater with natural pH, the effluent pH was >9 in the batch system, while in the continuous system the pH was 8–8.5. Likewise, while the effluent temperature was up to 60°C in the batch system, it was at most 35°C in the continuous system. However, the energy consumption values in the continuous system were considerably lower compared with the batch system. At a current intensity of 10 A, 80 kWh of energy per unit volume was consumed in the batch system, while it was 50 kWh for the continuous system. The present results show that the batch system can be used for small wastewater streams whereas the continuous system can be used for large wastewater streams for domestic wastewater treatment.     

Dynamics of a complex mass movement triggered by heavy rainfall: a case study from NW Turkey

Following a period of heavy precipitation, a large and complex mass movement, namely the Dagkoy landslide, occurred in the West Black Sea Region of Turkey on May 21, 1998. This paper describes the conditioning factors of the landslide and interprets the mass transport processes in terms of a movement scenario. Geology, geomorphology and vegetation cover were considered as the conditioning factors of the failure. Observations showed that the gently sloping (about 10°) area is mostly covered by dense forest trees at the crown where the motion initiated. Significant intersection of the collapsed slope with dip of the local marls seems to have contributed to the formation and geometry of the landslide. The distance from the crown down to the toe of the landslide measured more than 600 m, with about 0.6 km³ total earth material displaced. The landslide has both a block sliding characteristics in the upper portions and a debris flow/soil flow component around the margins of the sliding blocks in the middle parts and at the toe. The proposed scenario for the landslide reveals that the movement was initiated near crown as a result of the excess water content in the marls at the end of 3 days of heavy rainfall. The early perturbations (transverse cracks, ridges, etc.) lasted for 6–7 h, after which the central part of the zone started to move as a soil flow in which very large intact blocks were transported. Even though the movement was very rapid (1.2 m/min), there was no loss of life. However, the movement destroyed 38 houses, one mosque and a considerable amount of farmland.     

The collision experiment between rolling stones of different shapes and protective cushion in open-pit mines

Though gravel cushions are used worldwide in open-pit mines and railway slopes to control the impact of rolling stones, no universal technical standards have been put in place to guide engineers in their correct design, and few laboratory test results are available with which to characterize collisions between rolling stones and a gravel cushion. We carried out a large number of experiments in which rolling stones made of the same material but differently shaped were dropped from various heights onto cushions with various particle sizes and thicknesses. We investigated the characteristics of the resulting collisions, and the relationships between coefficients of restitution(CORs) of blocks with different shape and release height H, cushion thickness h and particle diameter d are obtained through linear fitting method. Orthogonal testing reveals the relative influence of block shape, release height, and the particle size and thickness of the cushion on the collision characteristics, which can assist engineers in designing a gravel cushion suitable to the distribution and weathering characteristics of rolling stones in a specific area.     

Changes in algal, coral and fish assemblages along water quality gradients on the inshore Great Barrier Reef

Macroalgae, hard corals, octocorals, and fish were surveyed on 10 to 13 inshore coral reefs of the Great Barrier Reef, along a water quality gradient in two regions with contrasting agricultural land use. A water quality index was calculated for each reef based on available data of particulate and dissolved nutrients, chlorophyll and suspended solids. Strong gradients in ecological attributes occurred along the water quality gradient. Macroalgae of the divisions Rhodophyta and Chlorophyta increased with increasing nutrients, while Phaeophyta remained similar. Octocoral richness and abundances of many hard coral and octocoral taxa decreased, and none of the hundreds of species increased. At reefs in higher nutrient environments, hard coral and octocoral assemblages were composed of subsets of the many species found in lower nutrient environments, whereas fish and macroalgal assemblages consisted of contrasting suites of species. The study identifies species groups that are likely to increase or decrease in abundance with changing water quality.     

Effects of T-shape groin parameters on beach accretion

The effects of various groin parameters (length, head length and opening) and wave parameters (wave height, wave period and wave angle) on the accretion of the area protected by T-shape groins are studied in a physical model. The model studies are performed using regular waves in a basin. A numerical model which depends primarily on a CERC model is employed to examine the effects of some of the above parameters. Good agreement is found in the results of physical and numerical models. The results of a numerical model are compared with field data obtained by deep sounding measurements at Of coasts, Trabzon Province, Turkey. The finding from this study may be employed in designing T-shape groins.     

Determination of bar parameters caused by cross-shore sediment movement

Waves, topographic features and material properties are known as the most important factors affecting the sediment movement and coastal profiles. In this study, considering wave height (H=6.5, 17, 16, 20, 23, 26 and 30 cm) and period (T=1.46 and 2.03 s), bed slope (m=1/10, 1/15 and 1/25) and sediment diameter (d₅₀=0.18, 0.26, 0.33 and 0.40 mm), cross-shore sediment movement was investigated using a physical model and various offshore bar geometric parameters were determined by the resultant erosion profile. The offshore bar geometric characteristics are the distance between the bar crest and the shoreline, the depth from bar crest to the still-water level, the distance between the equilibrium point and the shoreline, the distance between the closure point and the shoreline, and the bar volume. Dimensional and non-dimensional equations were obtained by using non-linear regression methods through the experimental data and compared with those of previously developed equations. The results have indicated that the proposed equations fit to experimental data better than previously developed equations.     

Soil temperature modeling at different depths using neuro-fuzzy,neural network,and genetic programming techniques

The applicability of artificial neural networks (ANN), adaptive neuro-fuzzy inference system (ANFIS), and genetic programming (GP) techniques in estimating soil temperatures (ST) at different depths is investigated in this study. Weather data from two stations, Mersin and Adana, Turkey, were used as inputs to the applied models in order to model monthly STs. The first part of the study focused on comparison of ANN, ANFIS, and GP models in modeling ST of two stations at the depths of 10, 50, and 100 cm. GP was found to perform better than the ANN and ANFIS-SC in estimating monthly ST. The effect of periodicity (month of the year) on models’ accuracy was also investigated. Including periodicity component in models’ inputs considerably increased their accuracies. The root mean square error (RMSE) of ANN models was respectively decreased by 34 and 27 % for the depths of 10 and 100 cm adding the periodicity input. In the second part of the study, the accuracies of the ANN, ANFIS, and GP models were compared in estimating ST of Mersin Station using the climatic data of Adana Station. The ANN models generally performed better than the ANFIS-SC and GP in modeling ST of Mersin Station without local climatic inputs.