Comparative study of probable maximum precipitation and isohyetal maps for mountainous regions, Pakistan

Probable maximum precipitation (PMP) is widely used by hydrologists for appraisal of probable maximum flood (PMF) used for soil and water conservation structures, and design of dam spillways. A number of methods such as empirical, statistical and dynamic are used to estimate PMP, the most favored being statistical and hydro-meteorological. In this paper, PMP estimation in mountainous regions of Pakistan is studied using statistical as well as physically based hydro-meteorological approaches. Daily precipitation, dew point, wind speed and temperature data is processed to estimate PMP for a one-day duration. Maximum precipitation for different return periods is estimated by using statistical approaches such as Gumble and Log-Pearson type-III (LP-III) distribution. Goodness of fit (GOF) test, chi-square test, correlation coefficient and coefficient of determination were applied to Gumble and LP-III distributions. Results reveal that among statistical approaches, Gumble distribution performed the best result compared to LP-III distribution. Isohyetal maps of the study area at different return periods are produced by using the GIS tool, and PMP in mountainous regions varies from 150 to 320 mm at an average value of 230.83 mm. The ratio of PMP for one-day duration to highest observed rainfall (HOR) varied from 1.08 to 1.29 with an average value of 1.18. An appropriate frequency factor (K_m) is very important which is a function of mean for observed precipitation and PMP for 1-day duration, and K_m values varies from 2.54 to 4.68. The coefficient of variability (C_v) varies from minimum value of 28% to maximum value of 43.35%. It was concluded that the statistical approach gives higher results compared to moisture maximization (MM) approach. In the hydro-meteorological approach, moisture maximization (MM) and wind moisture maximization (WMM) techniques were applied and it was concluded that wind moisture maximization approach gives higher results of PMP as compared to moisture maximization approach as well as for Hershfield technique. Therefore, it is suggested that MM approach is the most favored in the study area for PMP estimation, which leads to acceptable results, compared to WMM and statistical approaches.     

Characteristics,modification and environmental application of Yemen’s natural bentonite

The bentonite deposit of Lahij Province, Yemen, has very promising commercial applications due to its mineralogy and physical and chemical properties. It was examined to determine its mineralogical composition, chemical and physical properties of the bentonite deposit, purity and sodium-exchanged bentonite. Modified bentonite was synthesized by exchanging cetyltrimethylammonium cations for inorganic ions on the bentonite and its adsorption properties for ammonium were characterized in batch experiments. Analytical methods were carried out to study the bentonite comprising X-ray diffraction (XRD), scanning electron microscopy (SEM), infrared spectroscopy, chemical analysis and kinetic and isotherm models were also tested. The results have shown that the purification of bentonite resulted in a bentonite fractions of the total sample composed of montmorillonite and <5 % quartz. The XRD data showed that the interlayer spacing (d ₀₀₁) of bentonite decreased from 15.3 to 12.5 Å and then increased to 19.7 Å. Moreover, high cation exchange capacity, good water absorption and high swelling capacity were also obtained. The results have shown that the modified bentonite was more effective than the natural bentonite for ammonium removal. In addition to that, pseudo-second-order kinetic model, Freundlich and the Langmuir models described the adsorption kinetics and isotherm well. It was concluded that Yemen (Alaslef) bentonite can be potential adsorbents for ammonium removal.     

Spatio-temporal analysis of temperature variability,trend, and magnitude in the Hindu Kush region using Monte Carlo and Sen’s slope approaches

The present study explores the spatial and temporal deviations in temperature using Monte Carlo (MC) and Sen’s slope (SS) approaches in the Hindu Kush (HK) region. Climate change holds sturdy association against the temperature trend that has generated adverse impacts in the form of floods. In this attempt, for trend analysis, temperature has been selected as a meteorological parameter. This study mainly focuses on exploring the tendency in average temperature with respect to time and the consequential flood recurrences in the region. For the current study, data regarding temperature were typically collected from Pakistan Meteorological Department. In the study region, there are a total of seven meteorological station falls namely Dir, Chitral, Drosh, Saidu, Malam Jabba, Kalam, and Timergara. The temperature time series data was calculated and analyzed using MC and SS approaches for trend detection in order to demonstrate the kind of fluctuation in the Hindu Kush region. The resultant analysis further revealed that in the meteorological station of Dir, a more significant positive trend (α?=?0.0001) was found in mean monthly maximum, minimum, and monthly normal temperature. Likewise, at Drosh, a positive trend is detected in mean monthly maximum (α?=?0.04), monthly minimum (α?=?0.003), and monthly average (α?=?0.0005). Moreover, at Saidu met station, there is also a trend detected in temperature sub-variables such as monthly maximum (α?=?0.0001) and monthly minimum (α?=?0.001). In addition to these, at Kalam, there is a temperature trend noted for monthly minimum (α?=?0.01) and monthly average (α?=?0.02). Furthermore, the analysis demonstrates that there is no trend detected in the remaining stations, i.e., Chitral, Malam Jabba, Drosh, and Timergara. The overall analysis discovered that there is a sturdy relationship between climate change phenomenon and temperature variability. After using SS test to the temperature data of mean monthly maximum (TMMMax), the results explored that Kalam station grips the highest magnitude, i.e., Q?=?0.76; however, Timergara shows the lowermost, i.e., Q?=???0.34. For the monthly minimum temperature (TMMMin), at Kalam again, the highest value (Q?=?0.005) was detected; however, other stations revealed a negative trend, except Drosh which express no change in terms of magnitude. Similarly, in terms of monthly normal temperature (TMNor), Timergara station (Q?=???0.4) verified a negative trend magnitude and Malam Jabba station again trendless. Among all, the met station of Malam Jabba which holds an altitude of 2591 m is a hilly station just followed by Kalam having 2103 m height; however, Dir holds 1375 m height and the rest of the met stations show low elevation. The main reason for the temperature difference is the altitude of the study region.     

Estimating water balance components in irrigated agriculture using a combined approach of soil moisture and energy balance monitoring,and numerical modelling

Information on water balance components such as evapotranspiration and groundwater recharge are crucial for water management. Due to differences in physical conditions, but also due to limited budgets, there is not one universal best practice, but a wide range of different methods with specific advantages and disadvantages. In this study, we propose an approach to quantify actual evapotranspiration, groundwater recharge and water inflow, i.e. precipitation and irrigation, that considers the specific conditions of irrigated agriculture in warm, arid environments. This approach does not require direct measurements of precipitation or irrigation quantities and is therefore suitable for sites with an uncertain data basis. For this purpose, we combine soil moisture and energy balance monitoring, remote sensing data analysis and numerical modelling using Hydrus. Energy balance data and routine weather data serve to estimate ET₀. Surface reflectance data from satellite images (Sentinel-2) are used to derive leaf area indices, which help to partition ET₀ into energy limited evaporation and transpiration. Subsequently, first approximations of water inflow are derived based on observed soil moisture changes. These inflow estimates are used in a series of forward simulations that produce initial estimates of drainage and ET_act, which in turn help improve the estimate of water inflow. Finally, the improved inflow estimates are incorporated into the model and then a parameter optimization is performed using the observed soil moisture as the reference figure. Forward simulations with calibrated soil parameters result in final estimates for ET_act and groundwater recharge. The presented method is applied to an agricultural test site with a crop rotation of cotton and wheat in Punjab, Pakistan. The final model results, with an RMSE of 2.2% in volumetric water content, suggest a cumulative ET_act and groundwater recharge of 769 and 297 mm over a period of 281 days, respectively. The total estimated water inflow accounts for 946 mm, of which 77% originates from irrigation.     

First Record of the Belemnite Genus Hibolithes from Late Jurassic–Early Cretaceous Turbidites from Malaysia

Discovery of the remains of belemnites referred to the Hibolithes sp. from the Jurassic–Cretaceous Pedawan Formation in Sarawak, on the island of Borneo(Malaysia) comprises four fragments of belemnite rostra. The specimens are characterized by multiple fractures and vein filling. Two fragments measuring about 130 mm are relatively intact, with only part of the alveolar region missing; a third piece represents the middle part of a rostrum, and the fourth specimen is too fragmentary to be assigned to any specific part of the rostrum. Based on specimen characteristics, a Tithonian–Hauterivian age is plausible. The sedimentary succession that yielded the belemnite material comprises thick shale that reflects the Te division of Bouma sequence. The occurrence of a Hibolithes taxon in the uppermost Jurassic to lowermost Cretaceous Pedawan Formation sediments in Borneo reflects a near to global palaeobiogeographic distribution of this genus.     

Place,identity and stigma: blocks and the ‘blockies’ of Tara,Queensland, Australia

This article explores the role of geographical context in generating a stigmatised identity among residents of Tara rural subdivisions in the coal seam gas fields in Queensland’s Western Downs. The research was based on qualitative interviews with Tara ‘Blockies’, as these residents are commonly referred to, that revealed how their existence in the middle of an agrarian region resulted in the assignation of a stigma that has marked them as different, and subsequently devalued their status. We explain that this distinction and category division of the normals, referring to Tara’s Agrarian residents, from the ‘stigmatised’ led to an antagonistic relationship that prevented successful socio-cultural assimilation. We demonstrate how an immoral place becomes disadvantaged, resulting in poor well-being, and how imposed labels threaten the self-esteem of its occupants.     

Modeling the impact of groundwater harvesting on the hydro-salinity of a saline catchment in southeastern Australia

Recharge to a saline, unconfined shallow-water-table aquifer is normally considered as an irrecoverable loss of water, but such thinking could be reviewed empirically. The use of an appropriate groundwater harvesting system does not only provide an opportunity to recover this lost water, but can also help in catchment salinity management and improvement. Agricultural-based land-drainage systems such as those that use serial biological concentration (SBC) of salts, provide examples of such harvesting methods. The impact of groundwater harvesting has been assessed on the hydro-salinity of a saline catchment in southeastern Australia through modeling. For both the below average rainfall and very wet years, the “do nothing” scenario resulted in increasing salinization in the catchment. However, after introducing a SBC system, groundwater salinity showed a decreasing trend while hydraulic heads tended to stabilize around the depth of subsurface collector wells. However, for a successful groundwater harvesting system, proper understanding of the groundwater flows and salt mobilization associated with a catchment is necessary. The outcomes of this modelling study have the potential to address similar issues (salinization) and/or needs (water harvesting) existing elsewhere in the world, particularly in semi-arid regions.

Depositional Environment and Lithofacies Analyses of Eocene Lacustrine Shale in the Bohai Bay Basin: Insights from Mineralogy and Elemental Geochemistry

The effect of various depositional parameters including paleoclimate, paleosalinity and provenance, on the depositional mechanism of lacustrine shale is very important in reconstructing the depositional environment. The classification of shale lithofacies and the interpretation of shale depositional environment are key features used in shale oil and gas exploration and development activity. The lower 3^rd member of the Eocene Shahejie Formation(Es₃^x shale) was sel...     

Large scale mass movements triggered by the Kashmir earthquake 2005, Pakistan

The SPOT image analysis in Muzaffarabad Azad Kashmir,northwest Himalayas,Pakistan reveals that the Kashmir earthquake 2005 triggered a number of coseismic mass movements along the hanging wall block of the Muzaffarabad Fault.The Neelidandi and Langarpura rock falls have been identified as two major reactivated mass movements with an estimated volume of 3.1 × 106m3and 5.76 × 106m3,respectively.The Neelidandi and Langarpura mass movements were initiated during earthquake in the direction of northwest-southeast extension and northeastsouthwest directed thrusting,respectively.The Neelidandi rock fall occurred in sheared cherty dolomites and limestones of the Cambrian Muzaffarabad Formation,whereas the Langarpura rock fall occurred in alternating clays,shales,claystones,siltstones and sandstones of the Miocene Murree Formation.These rock units along the fault are highly fractured and jointed.The geotechnical maps and geological longitudinal profiles show the relationship between the geometrical characteristics and mechanism of these mass movements.Their characteristics were analyzed according to the role of topographic,seismic,geological and tectonic factors.The steep topography,sheared rocks,lithology,coseismic uplift and strong ground shaking of the hanging wall block along Muzaffarabad Fault facilitated the gravity collapse of these mass movements.     

Microfacies analysis and diagenetic fabric of the Lockhart Limestone exposed near Taxila,Margalla Hill Range,Punjab, Pakistan

The microfacies analysis and diagenetic fabric of the Lockhart Limestone are studied in an outcrop section exposed in the Margalla Hill ranges. The Lockhart Limestone is predominantly composed of medium to thick bedded, nodular and occasionally brecciated, highly fossiliferous limestone with thin interbeds of marl and shale. On the basis of detailed petrographic investigations, four microfacies have been identified including bioclastic packstone, wackestone (siliciclastic bioclastic rich sub-microfacies), wackestone-packstone, and mud-wackestone. Based on the microfacies analysis, the Lockhart Limestone is interpreted to have been deposited in the fore-shoal mid-ramp, mid-ramp, and outer ramp depositional environments. The Paleocene age has been assigned to the Lockhart Limestone based on age diagnostic foraminifera, i.e., Miscellanea, Lockhartia, and Ranikothalia. The diagenetic fabric of the Lockhart Limestone is characterized by several diagenetic features such as micritization, neomorphism (aragonite to calcite transformation and development of microspar), compaction, pressure dissolution (microstylolites), and cementation (calcite-filled microfractures). Such diagenetic features are developed in marine, meteoric, and burial diagenetic settings. The Paleocene Lockhart Limestone of Pakistan shows analogous features to that of the Paleocene Zongpu Formation (Member-3) of the Gamba-Tingri Basin of southern Tibet based on the outcrop features, microscopic fabric, and depositional environment.