Geochemical characteristics of ores and surface waters for environmental risk assessment in the Pinpet iron deposit,southern Shan State,Myanmar

Mining operations in the Pinpet Fe deposit, which is the second‐largest Fe deposit in Myanmar, are currently suspended, in part because of possible contamination of heavy metals and hazardous elements (e.g., Fe, As, Cu, Zn, and U) into the surrounding aquatic environment and associated public concern. However, a scientific investigation of the source and degree of contamination in streams near the deposit has not yet been conducted. Therefore, we quantified heavy‐metal and hazardous‐element concentrations of stream waters and sediments in stream beds, and measured the speciation and concentration of these metals in deposit Fe ores using the sequential extraction method, to better understand the influence of mining activities on the surrounding environment. Geochemical results for Nan‐tank‐pauk stream and its tributaries indicate that the chemical compositions of their waters are controlled by carbonate bedrock and that no detectable contamination has occurred as a result of mining activity or hematite and limonite ore beneficiation processes in either the wet or dry seasons. All measured heavy‐metal and hazardous‐element concentrations were below the World Health Organization standards for drinking water and the proposed national drinking water quality standards in Myanmar. Bulk chemical compositions of stream‐bed and tailings dam sediments show that As, Zn, and Cu concentrations are similar to those in uncontaminated sediments. Results of bulk mineralogical and chemical analyses of ore samples reveal that some limonite ore samples contain substantial amounts of As (up to 2 wt%). However, sequential extraction results indicate that most (>90%) of the As in these As‐rich ores is hosted in insoluble fractions (e.g., crystalline Fe hydroxides and clays). Therefore, arsenic is unlikely to be released into the aquatic environment by interacting with water during ore beneficiation processes should the mine resume operations.     

Improved description of global mixed-layer depth using Argo profiling floats

A global data set describing the gridded mixed-layer depth (MLD) in 10-day intervals was produced using high-quality Argo float data from 2001 to 2009. The characteristics and advantages provided by the new MLD data set are described here, including a comparison based on two different thresholds and using data sets of different vertical and temporal resolution. The MLD in the data set was estimated on the basis of a shallower depth of the iso-thermal layer (TLD) or iso-pycnal layer (PLD), calculated using the finite difference method. The MLD data are incorporated into 2° × 2° grid in the global ocean, including marginal seas. Also, two threshold values were used to examine differences in the MLD and its seasonal temporal variability. The characteristics and advantages of using the Argo 10-day intervals to determine the MLD were then confirmed by comparing those data with the station buoy daily means and the Argo monthly means. With respect to vertical and temporal resolutions, the Argo 10-day data has two distinct advantages: (1) improved representation of the MLD vertical change due to high vertical resolution, especially during periods of large MLD variability and (2) more detailed representation of the temporal change in MLD than achieved with the Argo monthly mean data, especially from winter to spring in mid and high latitudes. These advantages were maintained in the case of a larger threshold despite the fact that the MLD is rather deep and the detailed variation in its distribution differs depending on the season and location. This study also investigated the relative influence of TLD and PLD to the MLD calculation for each grid. Generally, the MLD is primarily determined based on the PLD at low and mid latitudes (TLD > PLD), whereas the TLD is more important at high latitudes, especially in winter (TLD < PLD). In the case of a larger threshold, the area of the larger PLD influence spreads polewards because of the greater effect of salinity in winter. Although there are some differences in the effect of temperature and salinity in estimations of the MLD, both are indispensable factors for the MLD estimations even at different thresholds.     

Lagrangian observation of phytoplankton dynamics at an artificially enriched subsurface water in Sagami Bay,Japan

Phytoplankton dynamics in the lower euphotic zone were observed by tracking a subsurface water released at 20-m depth from Takumi, an artificial upwelling device. Takumi continually discharged seawater pumped up from a depth of 205 m: this water was mixed with 5-m depth water to adjust the density to that of 20-m depth water of Sagami Bay, Japan. The discharged water was pulse-labeled at Takumi with uranine and tracked for 63.9 h with a drifting buoy equipped with a drogue at 20-m depth. We present a simple model to estimate in situ phytoplankton net growth rates from temporal changes in phytoplankton abundance in the discharged water with correction for the influence of water exchange between the discharged water and neighboring layers. Lagrangian observation showed active growth of pico- and nanophytoplankton, especially cryptophytes and Synechococcus (Cyanobacteria), in the subsurface layer. In contrast, diatoms grew little in spite of micromolar concentrations of nutrients. The active growth of pico- and nanophytoplankton was in good agreement with shipboard serial dilution culture experiments. The low growth activity of diatoms was suggested to be related to low light availability in the subsurface layer.     

Dynamic response characterization and simplified analysis methods for viscoelastic dampers considering heat transfer

Viscoelastic (VE) dampers are sensitive to temperature, excitation frequency, and strain level. As they dissipate the kinetic energy from earthquake or wind-induced structural vibrations, their temperature increases from the heat generated, consequently softening their VE materials and lowering their dynamic mechanical properties. Temperature increase can be significant for long-duration loading, but can be limited by heat conduction and convection which depend on damper configuration. The writers analytically explored such effect on the six different dampers by using their previously proposed three-dimensional finite-element analysis method. Results provided better understanding of how heat is generated within the VE material, conducted and stored in different damper parts, and dispersed to the surrounding air. These results also led to characterization of both local (e.g., temperatures, properties, and strain energy density) and global (e.g., hysteresis loops, and stiffness) behavior of VE dampers, and provided a framework for a new simplified one-dimensional (1D) modeling approach for time-history analysis. This new proposed 1D method greatly improves the computation time of the previously proposed long-duration method coupling fractional time-derivatives VE constitutive rule with 1D heat transfer analysis. Unlike the previous method, it idealizes uniform shear strain and VE material property distributions for computational efficiency, but still simulating non-uniform temperature distribution along the thickness direction of the VE material. Despite the approximations, it accurately predicts VE damper global responses.