Crustal movement along a collision boundary of plates (case of eastern Taiwan)

Recent crustal movements in eastern Taiwan were investigated based on geodetic and seismological data as a case study of the tectonics along a colliding plate boundary. Secular horizontal strain along the Longitudinal Valley, a probable arc-continent collision boundary between the Philippine Sea and Eurasion plates, is compressive with a large rate of 2 microstrains/year, and the maximum compression axis trends in NW-SE direction. This means that nearly two-thirds of the convergence rate between the two plates is consumed in the narrow zone along the valley and confirms the view that the valley is the plate boundary between the two. The amount of uplift in the Central Range, deduced from trigonometric leveling, reaches more than one meter during the past 60 years. Such active orogeny is caused by the high strain rate in this area. Horizontal displacement of the Coastal Range, a leading edge of the Philippine Sea plate, has a left-lateral component, suggesting that the boundary is a region of oblique collision and the range moves toward the north, producing subduction of the Philippine Sea plate off the Coast of northeastern Taiwan.An extensional strain pattern is found northeastern Taiwan near Hualien, in northern Taiwan near Ilan, and in southeastern Taiwan south Taitung. In northeastern Taiwan, the direction of the maximum extension axis is nearly parallel to the isodipth contours of deep-focus earthquakes that occurred under the southern part of the Ryukyu Trench. From a model calculation using a finite-element method, this pattern of strain is interpreted as an edge effect of the collision-subduction junction in northeastern Taiwan. The direction of the maximum extension in northern Taiwan forms high angles with the direction of the tectonic line near Ilan stretching from the Okinawa Trough. This fact is harmonious with the view that the Okinawa Trough is spreading. Extensional strain observed in southeastern Taiwan may be related to the eastward subduction since the area is situated on a transition zone, from collision to subduction.     

Increases of wet deposition at remote sites in Japan from 1991 to 2009

Temporal trends in wet deposition of major ions were explored at nationwide remote sites in Japan from April 1991 to March 2009 by using the seasonal Kendall slope estimator and the nonparametric seasonal Kendall test. For the trend analysis, datasets from eight remote sites (Rishiri, Echizenmisaki, Oki, Ogasawara, Shionomisaki, Goto, Yakushima, and Amami) were selected from the Japanese Acid Deposition Survey (JADS) conducted by the Ministry of the Environment. Deposition of H⁺ has been increasing at remote sites in Japan on a national scale. Significant (p????0.05) increases in H⁺ deposition were detected with changes of +3?C+9?%?year^?1 at seven sites, while insignificant increases were observed at one site. Depositions of non-sea salt (nss)-SO ₄ ^2? and NO ₃ ^? significantly increased at four and six sites, respectively, with changes of +1?C+3?%?year^?1. Significant increases in precipitation at four sites would have contributed to the increase in depositions of H⁺, nss-SO ₄ ^2? , and NO ₃ ^? . The emission trends of SO₂ and NO_x did not corresponded to the deposition trends of nss-SO ₄ ^2? and NO ₃ ^? . The different trends indicated that temporal variation of precipitation amount trend dominated the deposition trends.     

The RHESSI Imaging Concept

The Reuven Ramaty High-Energy Solar Spectroscopic Imager (RHESSI) observes solar hard X-rays and gamma-rays from 3 keV to 17 MeV with spatial resolution as high as 2.3 arc sec. Instead of focusing optics, imaging is based on nine rotating modulation collimators that time-modulate the incident flux as the spacecraft rotates. Starting from the arrival time of individual photons, ground-based software then uses the modulated signals to reconstruct images of the source. The purpose of this paper is to convey both an intuitive feel and the mathematical basis for this imaging process. Following a review of the relevant hardware, the imaging principles and the basic back-projection method are described, along with their relation to Fourier transforms. Several specific algorithms (Clean, MEM, Pixons and Forward-Fitting) applicable to RHESSI imaging are briefly described. The characteristic strengths and weaknesses of this type of imaging are summarized.     

LQR control with frequency‐dependent scheduled gain for a semi‐active floor isolation system

Floor isolation is an alternative to base isolation for protecting a specific group of equipment installed on a single floor or room in a fixed‐base structure. The acceleration of the isolated floor should be mitigated to protect the equipment, and the displacement needs to be suppressed, especially under long‐period motions, to save more space for the floor to place equipment. To design floor isolation systems that reduce acceleration and displacement for both short‐period and long‐period motions, semi‐active control with a newly proposed method using the linear quadratic regulator (LQR) control with frequency‐dependent scheduled gain (LQRSG) is adopted. The LQRSG method is developed to account for the frequency characteristics of the input motion. It updates the control gain calculated by the LQR control based on the relationship between the control gain and dominant frequency of the input motion. The dominant frequency is detected in real time using a window method. To verify the effectiveness of the LQRSG method, a series of shake table tests is performed for a semi‐active floor isolation system with rolling pendulum isolators and a magnetic‐rheological damper. The test results show that the LQRSG method is significantly more effective than the LQR control over a range of short‐period and long‐period motions. Copyright © 2013 John Wiley & Sons, Ltd.     

Fracture Toughness Evaluation Based on Tension-softening Model and its Application to Hydraulic Fracturing

This paper discusses the applicability of the tension-softening model in the determination of the fracture toughness of rocks, where the fracture toughness evaluated based on the tension-softening model is compared with the crack growth resistance deduced from laboratory-scale hydraulic fracturing tests. It is generally accepted that the fracture process is dominated by the growth of a fracture process zone for most types of rocks. In this study, the J-integral based technique is employed to determine the fracture toughness of Iidate granite on the basis of the tension-softening model, where compact tension specimens of different dimensions were tested in order to examine the specimen size effect on the measured fracture toughness. It was shown that the tension-softening relation deduced from the J-integral based technique allowed us to determine the specimen size independent fracture toughness K_c of Iidate granite. Laboratory-scale hydraulic fracturing tests were performed on cubic specimens (up to a 10 m sized specimen), where cyclic pressurization was conducted using a rubber-made straddle packer to observe the extent of the hydraulically induced crack. The experimental results of pressure and crack length were then used to construct the crack growth resistance curve based on the stress intensity factor K. The crack growth resistance obtained from the hydraulic fracturing tests was observed to initially increase and then level off, giving a constant K value for a long crack extension stage. The plateau K value in the crack growth resistance curve was found to be in reasonable agreement with the fracture toughness K_c deduced from the tension-softening relation. It was demonstrated that the tension-softening model provides a useful tool to determine the appropriate fracture toughness of rocks, which may be applicable for the analysis of the process of large-scale crack extension in rock masses.     

Factors regulating the distribution of elements in marine sediments predicted by a simulation model

The contents of oxyanionic elements (V, Se and Mo) and cationic transition metals (Mn, Fe, Co, Ni, Cu and Zn) in sediments from near-shore to deep-sea environments were measured to clarify factors regulating the distribution of these elements in marine sediments. For cationic transition metals of which contents increase from near-shore to deep-sea environments, the chemical composition of pelagic clays is modeled by a mixture of aluminosilicates having the chemical composition of average shale and Fe–Mn oxides having the chemical composition of associated manganese nodules. The content of V is fairly constant in sediments from near-shore to deep-sea areas. The mixture model of average shale and manganese nodules holds also for V, although most of the V is located in the aluminosilicate lattices. The content of Se in the near-shore sediments is higher and that in the deep-sea sediments is lower than that in average shale. The high content in the near-shore sediments is interpreted as the addition of biogenic materials to aluminosilicates with average shale composition and the low content in deep-sea sediments is explained by oxidative release of Se from aluminosilicates. The content of Mo in sediments increases from near-shore to deep-sea environments. The general distribution of Mo in marine sediments is expressed by the mixture model. An anomalously high content of Mo in a near-shore sediment is attributed to adsorption of molybdate on manganese oxides.     

Adsorption of tributyltin by tributyltin resistant marine Pseudoalteromonas sp. cells

The isolate, Pesudoalteromonas sp. TBT1, could grow to overcome the toxicity of tributyltin chloride (TBTCl) up to 30 microM in the absence of Cl(-) in the medium until the cells reached an exponential phase of growth. The viability, however, was reduced after the cells reached a stationary phase. The degradation products, such as dibutyltin (DBT) and monobutyltin (MBT), were not detected in the growth medium, indicating that the isolate has no ability to degrade TBT into less toxic DBT and MBT. Up to about 10(7.5) TBT molecules were adsorbed by a single cell. The observation of morphological changes with an electron microscope showed that the cell surface became wrinkled after exposure to the lethal concentration of 10 mM TBTCl. These results indicate that the resistance of the isolate toward the toxicity of TBTCl is not related to the unique cell surface, which seems to play an important role in preventing the diffusion of TBTCl into the cytoplasm.