A stochastic model of soil erosion

The erosion model computes the rill and inter-rill flow over a surface with random roughness, and the erosion caused by this flow. The measured roughness of a surface is analysed and used to generate random surfaces for the simulation process. Computations are carried out over a number of time intervals; the steady state condition is assumed for each interval. Changes in the surface geometry due to erosion during an interval are used to revise the surface for the subsequent interval. The model includes simplified mechanisms to simulate ponding, deposition and failure of side slopes of rills.     

Monitoring and analysing the Emirate of Dubai’s land use/land cover changes: an integrated,low-cost remote sensing approach

This study presents a modified low-cost approach, which integrates the spectral angle mapper and image difference algorithms in order to enhance classification maps for the purpose of monitoring and analysing land use/land cover change between 2000 and 2015 for the Emirate of Dubai. The approach was modified by collecting 320 training samples from QuickBird images with a spatial resolution of 0.6 m, as well as carrying out field observations, followed by the application of a 3?×?3 Soble filter, sieving classes, majority/minority analysis, and clump classes of the obtained classification maps. The accuracy assessment showed that the targeted 2000, 2005, 2010 and 2015 classification maps have 88.1252%, 89.0699%, 90.1225% and 96.0965% accuracy, respectively. The results showed that the built-up area increased by 233.721?km² (5.81%) between 2000 and 2005 and continues to increase even up and till the present time. The assessment of changes in the periods 2000–2005 and 2010–2015 confirmed that net vegetation area losses were more pronounced from 2000 to 2005 than from 2010 to 2015, dropping from 47,618 to 40,820?km², respectively. This study is aimed to assist urban planners and decision-makers, as well as research institutes.     

Groundwater condition based on geoelectrical technique and Dar Zarrouk parameters between El Alamein and El Dabaa—Egypt

El Alamein-El-Dabaa area lies in the western Mediterranean coastal zone of Egypt with about 50 km long. The aims of the present study are the shallow groundwater aquifer determination and calculate the electric parameters of the overburden to achieve the easiest way for detecting groundwater contamination and considered it during the planning of new development project(s). To attain this target, 44 vertical resistivity soundings using Schlumberger array of the maximum AB/2?=?1000 m in the form of four profiles were carried out. From the interpretation results, six geoelectrical layers have been established in the area, and iso-resistivity, depth to water, and isopach contour maps are presented. Four geoelectrical cross-sections (two geoelectrical cross-sections are parallel to the Mediterranean shoreline and the other two are normal to the Mediterranean shoreline) have been constructed. According to this work, the upper part of the Oolitic Limestone represents the shallow groundwater aquifer in this area and can be distinguished into two zones. The upper zone is brackish, whereas the lower one is saline. The geoelectrical succession reveals that the aquifer is free type. The depth to water ranges between 20 and 63 m; therefore, it is the choice as the best sites for groundwater exploitation. In the area under study, the depth to water and the thickness of the brackish increase towards the south side as well as the depth to the brackish water. The Dar-Zarrouk parameters clarified that there are some parts that may contaminate pathways and other parts are not.     

Rise and Fall of an Egyptian Oasis: Artesian Flow,Irrigation Soils,and Historical Agricultural Development in El‐Deir,Kharga Depression,Western Desert of Egypt

The present study examines the geoarchaeological history of an oasis in Kharga Depression in central Egypt. El‐Deir is renowned for its Ptolemaic temple and Roman fortress on the road from former Hibis (Kharga) to the Nile Valley. During the survey, spring mounds and irrigation soils belonging to an ancient agricultural zone were discovered, and further documented by ceramics found on the site. Our methodology combines the geomorphological interpretation of landforms (especially yardangs) with ceramics and ¹⁴C‐dated charcoal to distinguish and date former agricultural areas in El‐Deir. The results show that the oasis experienced several phases of soil accretion and destruction through time. Playa sediments were deposited in the humid early Holocene and severely eroded by deflation before the onset of irrigated agriculture between Pharaonic and Persian times. Very fast vertical soil accretion occurred in the Ptolemaic period, but irrigation soils were later destroyed during the Roman period by a combination of wind deflation and flash floods (second to fourth century A.D.), suggesting a period of climate instability. The case of El‐Deir invites reevaluation of constructive agencies for the development of irrigated land and destructive agencies as limiting factors for the sustainability of agricultural practices in late antiquity.     

Pattern recognition of seismogenic nodes using Kohonen selforganizing map: example in west and south west of Alborz region

Pattern recognition of seismic and morphostructural nodes plays an important role in seismic hazard assessment. This is a known fact in seismology that tectonic nodes are prone areas to large earthquake and have this potential. They are identified by morphostructural analysis. In this study, the Alborz region has considered as studied case and locations of future events are forecast based on Kohonen Self-Organized Neural Network. It has been shown how it can predict the location of earthquake, and identifies seismogenic nodes which are prone to earthquake of M5.5+ at the West of Alborz in Iran by using International Institute Earthquake Engineering and Seismology earthquake catalogs data. First, the main faults and tectonic lineaments have been identified based on MZ (land zoning method) method. After that, by using pattern recognition, we generalized past recorded events to future in order to show the region of probable future earthquakes. In other word, hazardous nodes have determined among all nodes by new catalog generated Self-organizing feature maps (SOFM). Our input data are extracted from catalog, consists longitude and latitude of past event between 1980-2015 with magnitude larger or equal to 4.5. It has concluded node D1 is candidate for big earthquakes in comparison with other nodes and other nodes are in lower levels of this potential.     

Numerical modelling-based comparison of longitudinal dispersion coefficient formulas for solute transport in rivers

River water quality models usually apply the Fischer equation to determine the longitudinal dispersion coefficient (D_x) in solving the advection–dispersion equation (ADE). Recently, more accurate formulas have been introduced to determine D_x in rivers, which could strongly affect the accuracy of the ADE results. A numerical modelling-based approach is presented to evaluate the performance of various D_x formulas using the ADE. This approach consists of a finite difference approximation of the ADE, a MATLAB code and a MS Excel interface; it was tested against the analytical ADE solution and demonstrated using eight well-known D_x formulas and tracer study data for the Chattahoochee River (USA), the Severn (UK) and the Athabasca (Canada). The results show that D_x has an important effect on tracer concentrations simulated with the ADE. Comparison between the simulated and measured concentrations confirms the appropriate performance of Zeng and Huai’s formula for D_x estimation. Use of the newly proposed equations for D_x estimation could enhance the accuracy of solving the ADE.     

Chemometric Differentiation of Oil Families and Their Potential Source Rocks in the Gulf of Suez

Natural Resources Research - An oil–oil and oil–source rock correlation study was carried out using chemometric methods applied to geochemical data for 123 Upper Cretaceous—Lower...     

Back analysis of an excavated slope failure in highly fractured rock mass: the case study of Kargar slope failure (Iran)

This paper examines the failure of Kargar cut slope located at the south part of Esfahan subway using analytical and numerical back analysis methods. The excavated trench has 27 m depth with near vertical walls due to the space limitation around it. The geology of the area comprises weathered and heavily jointed shale and sandstone overlaid by alluvium deposits. Despite the slope being supported by shotcrete and fully grouted rock bolts, a catastrophic failure occurred at the east wall. Due to the uncertainty about the causes of failure initiation, back analyses have been performed via both the limit equilibrium and numerical method for considering various probable mechanisms. In the back analysis with limit equilibrium method, the rock mass is assumed as an equivalent continuum and Hoek–Brown failure criterion and geological strength index (GSI) are applied to calculate the shear strength parameters. The results show that GSI value was 33 in the failed mass. In the numerical back analysis, the distinct element method is applied to study the contribution of rock joints to the failure and progressive rock mass strength degradation until failure. The results show that threshold values of joint cohesion and friction were 0.2 MPa and 30°, respectively. Also the modeled slip surface being step-shaped agrees with the observed one.