Region of motion in the Sitnikov four-body problem when the fourth mass is finite

This article deals with the region of motion in the Sitnikov four-body problem where three bodies (called primaries) of equal masses fixed at the vertices of an equilateral triangle. Fourth mass which is finite confined to moves only along a line perpendicular to the instantaneous plane of the motions of the primaries. Contrary to the Sitnikov problem with one massless body the primaries are moving in non-Keplerian orbits about their centre of mass. It is investigated that for very small range of energy h the motion is possible only in small region of phase space. Condition of bounded motions has been derived. We have explored the structure of phase space with the help of properly chosen surfaces of section. Poincarè surfaces of section for the energy range ?0.480≤h≤?0.345 have been computed. We have chosen the plane (q ₁,p ₁) as surface of section, with q ₁ is the distance of a primary from the centre of mass. We plot the respective points when the fourth body crosses the plane q ₂=0. For low energy the central fixed point is stable but for higher value of energy splits in to an unstable and two stable fixed points. The central unstable fixed point once again splits for higher energy into a stable and three unstable fixed points. It is found that at h=?0.345 the whole phase space is filled with chaotic orbits.     

Timescales of partial melting in the Himalayan middle crust: insight from the Leo Pargil dome, northwest India

The Leo Pargil dome (LPD) in northwest India exposes an interconnected network of pre-, syn-, and post-kinematic leucogranite dikes and sills that pervasively intrude amphibolite-facies metapelites of the mid-crustal Greater Himalayan sequence. Leucogranite bodies range from thin (5-cm-wide) locally derived sills to thick (2-m-wide) crosscutting dikes extending at least 100 m. Three-dimensional exposures elucidate crosscutting relations between different phases of melt injection and crystallization. Combined laser ablation inductively coupled plasma mass spectrometry U–Th/Pb geochronology and trace element analysis on well-characterized monazite grains from nineteen representative leucogranites yields a large, internally consistent data set of approximately 700 U–Th/Pb and 400 trace element analyses. Grain-scale variations in age correlate with trace element distributions and indicate semi-continuous crystallization of monazite from 30 to 18 Ma. The youngest U–Th/Pb ages in a given sample are consistent with the outcrop-scale crosscutting relations, whereas older ages within individual samples record inheritance from partially crystallized melt and source metapelites. U–Th/Pb isotopic and trace element data are incorporated into a model of melting within the LPD that involves (1) steady-state equilibrium batch melting of compositionally homogeneous metapelitic sources; (2) pulses of increased melt mobility lasting 1–2 m.y. resulting in segregation of melt from its source and amalgamation into mixed magmas; and (3) rapid emplacement and final crystallization of leucogranite bodies. Melt systems in the LPD evolved from locally derived, in situ melt in migmatitic source rocks into a vast network of dikes and sills in the overlying non-migmatitic host rocks.     

The origin of tin deposits in the Mount Wells region,Pine Creek Geosyncline,Northern Territory

Tabular steeply dipping cassiterite‐bearing lodes in the Mount Wells region are hosted by lower greenschist fades metasediment of the Pine Creek Geosyncline within the contact aureole of late orogenic granitoids. The latter are predominantly I‐type, but S‐type phases are developed near the sediment‐granitoid contact.

Quartz, cassiterite, pyrite, arsenopyrite, chalcopyrite and pyrrhotite are the main minerals. Two types of lodes are present: (i) Sn‐quartz lodes containing 5–10 vol% sulphide minerals; and (ii) Sn‐sulphide lodes containing ～ 70 vol% sulphide minerals. At the surface, the former appear as normal quartz veins and the latter as hematite‐quartz breccia resulting from the collapse of original sulphide‐rich lodes as a consequence of volume reduction due to oxidation and leaching.

Two stages of quartz veining are recognized in both types of lodes. Cassiterite is present in stage I while stage II is composed of barren quartz with minor pyrite. Late stage III carbonate veinlets are present in Sn‐sulphide lodes. The lode‐wallrock contact is sharp with weak alteration effects confined to the fringe of the lodes. The alteration minerals include sericite, quartz, tourmaline, chlorite, pyrite and minor K‐feldspar.

Four types of fluid inclusions are present in vein quartz and cassiterite: Type A (CO₂ ± H₂O ± CH₄); Type B (H₂O+～ 20% vapour); Type C (H₂O+ < 15% vapour) and Type D (H₂O+ < 15% vapour + NaCl). Early ‘primary’ inclusions represented by Types A and B are present in stage I only and have a well‐defined temperature mode at ～300°C and a salinity range of 1–20 wt% eq NaCl. Types C and D inclusions are ‘secondary’ in stage I and primary in stage II and have a temperature mode at 120–160°C and salinities from about 1 to more than 26 wt% eq NaCl. Variable H₂O‐CO₂ ratios of Type A inclusions and homogenization in CO₂ or H₂O phase at near identical temperature indicate entrapment at the H₂O‐CO₂ solvus and define a pressure of ～ 100 MPa. The melting sequence of frozen inclusions suggests that the ore fluids were mainly H₂O‐CO₂‐CH₄‐Na‐Ca‐Cl brines. This is also confirmed by Raman Laser Spectrometry.

Oxygen and sulphur isotope data are consistent with a magmatic origin of the ore fluids. The δD values are up to 20%0 higher than those expected for magmatic fluids and probably resulted from interaction of the latter with the carbonaceous strata. This interpretation is supported by δ¹³C data on the fluid inclusion CO₂.

Fluid inclusions, stable isotope and mineralogical data are used to approximate the physico‐chemical parameters of the ore fluids which are as follows: T 300°C, m Cl～2, fO₂ ～ 10^‐35, mSS ～ 0.01, Sn ～ 1 ppm, Cu ～ 1 ppm and pH ～ 5.5.

It is suggested that fluids of granitic parentage interacted with the enclosing sediment and picked up CO₂, CH₄ and possibly Ca. The granitic phases became reduced due to this interaction and developed S‐type characteristics. Tin was probably partitioned into the CH₄‐bearing reduced fluids. At some stage the fluid overpressure exceeded the lithostatic lode enforcing failure of the carapace and the intruded rocks by hydraulic fracturing causing CH₄ and CO₂ loss resulting in the precipitation of the ore minerals.     

A new evaluation of seismic hazard for the northwestern part of Saudi Arabia

Natural Hazards - A new evaluation of seismic hazard in the northwestern part of Saudi Arabia area has been carried out, for the minimization and mitigation of earthquake losses. The study area...     

The geoaccumulation index and enrichment factor of mercury in mangrove sediment of Port Klang, Selangor, Malaysia

Mangrove areas are important to the ecosystem. One of its crucial functions is as a sink of pollutants, especially metal ions. However, the accumulation of metals in mangrove sediment can generate negative impacts on plant growth, microbial activity, and soil fertility. Apart from that, the severity of the impact is highly influenced by the type of metal found in the sediment and the quality of sediment itself. One of the metals that have adverse effects on the environment is mercury. The objectives of this study are to determine the concentration and distribution of mercury and to assess the enrichment of mercury in Port Klang mangrove sediment by using geoaccumulation index and enrichment factor. Sediment samples were collected from 30 sampling points that cover Langat River and Klang River estuaries, Lumut Straits, Pulau Klang, and Pulau Indah. During sampling, water parameters such as pH, salinity, electrical conductivity, and total dissolved solids were measured in situ, whereas the total mercury in sediment samples was determined at the laboratory using inductively coupled plasma mass spectrometry. In this study, mercury was found to be concentrated along Lumut Strait especially in the mixing zone near the confluence of Langat River and at the jetty to Pulau Ketam. The geoaccumulation index and enrichment factor (calculated using logarithmized data of the reference element) found that three stations were enriched with mercury. In addition, geoaccumulation index was also observed to be more objective compared to enrichment factor whose results were influenced by the concentration of reference element used.     

Leaching capabilities of iodine monochloride (ICl) and diethylenetriamine pentaacetic acid (DPTA) at different concentrations and pH for some major and trace metals from coal and coal fly ash

In the present study, coal from Chakwal (Pakistan) was leached with an aqueous solutions of iodine monochloride (ICl) and diethylenetriamine pentaacetic acid (DPTA) of different concentrations. The effect of stirring time, concentration and pH was studied on the leaching of different metals from coal. The physicochemical parameters indicated that the coal was of reasonably good quality. The results indicated that with increase in time duration, the extraction of metals increased. In most of the cases, metal concentration increased in the leachate with increasing the concentration of the leaching agents. DPTA was found to be the best leaching agent for most of the metals. Higher extraction of metals from coal fly ash indicated that coal organic matter has a pronounced effect on the leaching. Higher concentration of metals was extracted from virgin coal and coal fly ash at low pH (p?>?0.00) as compared to high pH. DPTA extracted metals in higher concentration from virgin coal and coal fly ash at low pH as compared to ICl. Based on the present study, the most leached metals were Fe, Cu, Mn and the least were Pb, Ni, Cd and Cr.     

An application of three-dimensional electrical resistivity imaging for the detection of an underground waste-water system

A 3D electrical resistivity imaging survey is presented in this paper. The objective was to investigate an underground wastewater system at the University of Malaya, Malaysia. Apparent resistivity data were collected along ten parallel lines using a Wenner-Schlumberger configuration; electrode cables were oriented in the x-direction with 3 m spacing. Roll-along measurements using a line spacing of 3 m were carried out covering a grid of 20 × 10 electrodes. All data sets were merged into a single data file in order to perform a 3D inversion. Two different 3D least squares algorithms, based on the robust inversion method and the smoothness-constrained technique, were used for the inversion of the apparent resistivity data. Both the horizontal and vertical extents of the anomalous zones found by inversion are displayed. The results indicate the superiority of the robust inversion method over the smoothness-constrained technique at this site. The results are in sufficient accordance with previously known information about the investigation area. The results show that 3D electrical resistivity imaging surveys, in combination with an appropriate 3D inversion method, can be highly useful for engineering and archaeological investigations as well as for environmental applications.     

Petrogenesis and tectonic setting of bimodal volcanism in the Sakoli Mobile Belt, Central Indian shield

The Sakoli Mobile Belt comprises bimodal volcanic rocks that include metabasalt, rhyolite, tuffs, and epiclastic rocks with metapelites, quartzite, arkose, conglomerate, and banded iron formation (BIF). Mafic volcanic rocks are tholeiitic to quartz‐tholeiitic with normative quartz and hypersthene. SiO₂ shows a large compositional gap between the basic and acidic volcanics, depicting their bimodal nature. Both the volcanics have distinct geochemical trends but display some similarity in terms of enriched light rare earth element–large ion lithophile element characteristics with positive anomalies for U, Pb, and Th and distinct negative anomalies for Nb, P, and Ti. These characteristics are typical of continental rift volcanism. Both the volcanic rocks show strong negative Sr and Eu anomalies indicating fractionation of plagioclases and K‐feldspars, respectively. The high Fe/Mg ratios for the basic rocks indicate their evolved nature. Whole rock Sm–Nd isochrons for the acidic volcanic rocks indicate an age of crystallization for these volcanic rocks at about 1675 ± 180 Ma (initial ¹⁴³Nd/¹⁴⁴Nd = 0.51017 ± 0.00017, mean square weighted deviate [MSWD] = 1.6). The εNd_t (t = 2000 Ma) varies between ?0.19 and +2.22 for the basic volcanic rock and between ?2.85 and ?4.29 for the acidic volcanic rocks. Depleted mantle model ages vary from 2000 to 2275 Ma for the basic and from 2426 to 2777 Ma for the acidic volcanic rocks, respectively. These model ages indicate that protoliths for the acidic volcanic rocks probably had a much longer crustal residence time. Predominantly basaltic magma erupted during the deposition of the Dhabetekri Formation and part of it pooled at crustal or shallower subcrustal levels that probably triggered partial melting to generate the acidic magma. The influence of basic magma on the genesis of acidic magma is indicated by the higher Ni and Cr abundance at the observed silica levels of the acidic magma. A subsequent pulse of basic magma, which became crustally contaminated, erupted as minor component along with the dominantly acidic volcanics during the deposition of the Bhiwapur Formation.     

ANALYSIS OF FOLDS SOUTH OF MALAKAND AND ADJOINING AREAS, NORTH PAKISTAN

ANALYSIS OF FOLDS SOUTH OF MALAKAND AND ADJOINING AREAS, NORTH PAKISTAN1　Can啨ｒｏｔＪ,QuG .CuadernosdeGeologiaiberica ,1998,2 4:311～ 331. 2　DebelmasJ,MascleG .EnsSciencesdelaTerre[M ].Masson ,ed .1991.2 99.3　GaetaniM ,GarzantiE .AAPGBull ,1991,75 (9) :142 7～ 144 6 . 4　HendrixMS ,GrahamSA ,CarrollAR ,etal.GeolSocAmBull,1992 ,10 4:5 3～ 79.. 5　Jia ,Coll.PetroleumIndustryPress,Beijing .1997,2 95 . 6　JiaD ,LuHCaiD ,etal.AAPGBull ,8…     

ASSESSMENT OF 17β-ESTRADIOL IN AQUATIC ENVIRONMENTS AROUND KLANG VALLEY, MALAYSIA

This study was conducted to assess the existing concentration of 17β-estradiol(E2)in the surface water samples collected from rivers and lakes around Klang Valley,Malaysia.E2,which is a natural feminizing chemical produced in female organisms,regularly used to compare with other environmental estrogens because they behave similarly and react effectively as a hormone at a very low concentration.It was found that the average concentration of E2 in the aquatic environment of Klang Valley was(14.08 ±3.67)pg/mL,which was 14 times higher than those in the Japanese aquatic environment in this study.The river system had the average concentration of(20.02±5.26)pg/mL while the lake had an average concentration of(5.91±3.39)pg/mL.The E2 concentration was presumed high if the sources occurred nearby the area.Current levels of E2 in the aquatic environment may possess threats to existing aquatic organisms.Since high level of E2 has been discovered in the aquatic environment around Klang Valley,further studies and monitoring of E2 and other EDCs concentrations are needed to determine their levels in Malaysian aquatic environment and help to control these chemicals pollution in the aquatic environment.