The impact of the geologic setting on the Quaternary aquifer,El-Tur area,Southwest Sinai,Egypt

The groundwater extracted from the unconfined Quaternary aquifer is the main source of water supply in El-Tur area. The area is bounded from the east by the elevated basement complex of Southern Sinai and from the west by El-Qabaliyat Ridge. The wadis dissecting these highlands form effective watersheds of the Quaternary aquifer. These wadis form areas of focused recharge. Recharge also occurs directly via the Quaternary sediments covering El-Qaa Plain. Subsurface lateral groundwater flow from the fractured basement contributes significant recharge to the aquifer as well. The aquifer sediment facies affect the type and quality of groundwater. In the eastern part where the aquifer is composed mainly of gravel and coarse sand with fragments of weathered basement, the Na-Cl-SO₄ water dominates. In the west where the facies change is rapid and complex, many water types arise. The base exchange index (BEX) is positive in this part reflecting the role of clay minerals in changing the water types via cation exchange. In the east where clays are insignificant in the aquifer, the BEX is negative. In the western part next to El-Qabaliyat Ridge, the wells discharging from the calcareous sand zone have low groundwater salinities compared to the wells discharging from the alluvium. In general, the groundwater salinity increases in the direction of groundwater flow from the northeast to the southwest which reflects the dissolution of aquifer sediments. The concentration relationships between the major ions on one hand and chloride on the other reflect the dissolution of calcium carbonates, precipitation of K- and Mg-bearing minerals, and cation exchange of Ca for Na on clay minerals. The hydrochemical models support these reactions. In addition, they show that the effect of evaporation on the recharge water in the western catchment is about four times its effect on the eastern recharge water which reflects the rapid recharge through the wadis draining the fractured basement. Moreover, the contribution from the eastern catchment in sample No. 23 is more than four-folds the contribution from the western recharge area. The stable isotopes (²H and ¹⁸O) show that the Quaternary aquifer is recharging from recent rainfall. However, upward leakage of Paleogene groundwater (depleted in ¹⁸O) also occurs. The groundwater level map shows strong overpumping impact especially in the areas close to El-Tur city.     

Vibration screening by trench barriers,a review

This paper provides a review of various investigations concerned with vibration isolation using trench barriers and factors affecting their performance, also extracts design recommendations, because there is no exact conclusion of researches in this field. Vibrations induced by different sources can be seriously harmful to structures and occupants. Geometrical parameters, soil characteristics, and filling material properties can affect a barrier’s performance. Investigators have applied analytical approach, finite element, boundary element, experimental, and field studies to identify relevant factors. Various geometrical parameters affecting trench’s isolation level were examined, among which depth of trench was found to be the most important, but in most cases, the width of the trench and source-barrier distance have a low effect. Shear-wave velocity ratio of filling material and surrounding soil has the most significant role of all material properties. Using high-energy-absorbing materials can lead to better isolation. The majority of studies consider soil and filling material’s behavior to be elastic, so changes in loading amplitude have no effect on vibration reduction. Finally, among special cases in vibration isolation by trenches, non-rectangular and multiple ones found to be economically satisfying and well-isolating barriers.     

The impact of acid rain on phosphorus leaching from a sandy loam calcareous soil of western Iran

Simulated acidic precipitation (1:1 equivalent basis H₂SO₄:HNO₃) at pH values of 2.5, 3.0, 3.5, 4.0, 4.5, 5.0 and 7.0 were conducted using column leaching to determine impacts of simulated acid rain on phosphorus (P) leaching from a calcareous sandy loam soil over a 40-day period. Soil columns were irrigated every day to make a total of 1,061 mm, equivalent to 3.5 years of rainfall (based on average annual rainfall). Leachates were collected and analyzed for anions and cations. There was significant nonlinear correlation between the amount of P leached and the simulated acid rain (R ² = 0.61). Losses of P from the pH 2.5 and 7.0 treatments were 1.23, and 1.32 mg kg⁻¹, respectively. The results showed that the amount of P leached from pH 4 (1.46 mg kg⁻¹) and 5 treatments (1.52 mg⁻¹ kg⁻¹) were significantly larger than other treatments. Linear equation adequately described leaching of P in different treatments. The slope (mg kg⁻¹ day⁻¹) in the linear equation was defined as the leaching rate and for the pH 2.5 was 0.0354, and 0.0382 and 0.0406 for pH 4.5 and 7.0, respectively. The geochemical code Visual MINTEQ was used to calculate saturation indices. Leaching of P in different treatments was controlled by rate-limited dissolution of hydroxyapatite, β-tricalcium phosphate and to some extent octacalcium phosphate. The results indicate that acid rain in calcareous sandy loam soils may pose a risk in terms of groundwater contamination with P.     

Textural relations,P-T path,polymetamorphism and also geodynamic significance of metamorphic rocks of the Aligudarz-Khonsar region,Sanandaj-Sirjan zone,Iran

The metamorphic rocks of the Aligudarz-Khonsar region can be divided into nine groups: slate, phyllite, sericite schist, biotite-muscovite schist, garnet schist, garnet-staurolite schist, staurolite schist, mylonitic granite, and marble. In this metamorphic region, four phases of metamorphism can be identified (dynamothermal, thermal, dynamic and retrograde metamorphism) and there are three deformation phases (D1, D2 and D3). Paleozoic pelagic shales experienced prograde metamorphism and polymetamorphism from the greenschist to amphibolite facies along the kyanite geotherm. The metapelites show prograde dynamothermal metamorphism from the greenschist to amphibolite facies. Maximum degree of dynamothermal metamorphism is seen in the Nughan bridge area. Also development of the mylonitic granites in the Nughan bridge area shows that dynamic metamorphism in this area was more intense than in other parts of the AligudarzKhonsar metapelitic zone. The chemical zoning of garnets shows three stages of growth and syn-tectonic formation. With ongoing metamorphism, staurolite appeared, and the rocks reached amphibolite facies, but the degree of metamorphism did not increase past the kyanite zone. Thus, metamorphism of the pelitic sediments occurred at the greenschist to amphibolite facies (kyanite zone). Thermodynamic studies of these rocks indicate that the metapelites in the Aligudarz-Khonsar region formed at 490–550°C and 0.47–5.6 kbar.     

Extent of diagenetic transformations in severely altered biogenic silica deposits from Tunisia: new insights from mineralogy and geochemistry

Sedimentary biogenic silica from Redeyef in Gafsa basin (southern Tunisia) was analysed for its ²⁹Si and ²⁷Al magic angle spinning nuclear magnetic resonance (MAS NMR) spectra and complemented by X-ray diffraction and SEM observations. The ²⁹Si MAS NMR spectrum is characterized by the abundance of hydroxylated silicon, displayed in resonance intensities and reflects a clear tendency towards dissolution of diatomaceous amorphous silica and the occurrence of the hydrated silica, which is the main component that ensures the diagenetic transition via the mechanism of dissolution–precipitation to other more crystalline silica phases, after the lost of its hydroxyls groups (water) by heating (burial). ²⁷Al MAS NMR reveals two coordinations of Al; the octahedrally coordinated Al suggests the presence of clay relics trapped during crystal growth or a microcrystalline zeolite (clinoptilolite detected by SEM observations), while the tetrahedrally coordinated Al suggests the presence of minor quantities of minerals with tetrahedral Al, such as an Al-rich fluid and/or minerals such as feldspars.     

Simulation of particles settling in power-law fluids by combined lattice Boltzmann-smoothed profile methods

In the current study, the settling, interaction, drafting, kissing, and tumbling of two identical and non-identical circular particles were simulated in a two-dimensional box in shear-thinning, Newtonian, and shear-thickening fluids by using the combined lattice Boltzmann-smoothed profile methods. Furthermore, the drag coefficient of one particle settling for different power-law indexes and Archimedes numbers was calculated. Also, the effect of the diameter ratio of the two particle pairs was considered during settling. The developed method was validated by simulating the settling of one particle and two identical particles in a Newtonian fluid. To consider two non-identical particles, two cases were examined. In Case A, the larger particle was above the smaller one and in the Case B, the smaller particle was above the larger one. The results showed that the two non-identical particles were separated more easily than the identical ones. In the settling of two particles under the same Archimedes number, the drafting and kissing time considerably increased by changing the non-Newtonian fluid behavior from a shear-thinning one to a shear-thickening one. Also, when the larger particle was above the smaller one, the time duration of the kissing stage increased with the decrease in the diameter ratio.