Conditional spectrum bidirectional record selection for risk assessment of 3D structures using scalar and vector IMs

Several proposals are explored for the hazard and intensity measure (IM) consistent selection of bidirectional ground motions to assess the performance of 3D structural models. Recent studies have shown the necessity of selecting records that thoroughly represent the seismicity at the site of interest, as well as the usefulness of efficient IMs capable of estimating the response of buildings with low scatter. However, the advances realized are mostly geared towards the structural analysis of 2D models. Few are the combined record, and IM selection approaches suggested expressly for nonlinear dynamic analysis of 3D structural models, especially when plan asymmetry and torsion sensitivity come into play. Conditional spectrum selection is leveraged and expanded here to offer a suite of approaches based on both scalar and vector IMs that convey information from two orthogonal horizontal components of the ground motion. Applications on multiple 3D building models highlight the importance of (a) employing the same IM for both record selection and response assessment and (b) maintaining hazard consistency in both horizontal components, when using either a scalar or a vector IM. All tested approaches that respect these conditions can be viable, yet the one based on the geometric mean of multiple spectral ordinates from both components over a period range seems to hold the most promise for general use.     

Intra-survey reservoir fluctuations – implications for quantitative 4D seismic analysis

During the time taken for seismic data to be acquired, reservoir pressure may fluctuate as a consequence of field production and operational procedures and fluid fronts may move significantly. These variations prevent accurate quantitative measurement of the reservoir change using 4D seismic data. Modelling studies on the Norne field simulation model using acquisition data from ocean-bottom seismometer and towed streamer systems indicate that the pre-stack intra-survey reservoir fluctuations are important and cannot be neglected. Similarly, the time-lapse seismic image in the post-stack domain does not represent a difference between two states of the reservoir at a unique base and monitor time, but is a mixed version of reality that depends on the sequence and timing of seismic shooting. The outcome is a lack of accuracy in the measurement of reservoir changes using the resulting processed and stacked 4D seismic data. Even for perfect spatial repeatability between surveys, a spatially variant noise floor is still anticipated to remain. For our particular North Sea acquisition data, we find that towed streamer data are more affected than the ocean-bottom seismometer data. We think that this may be typical for towed streamers due to their restricted aperture compared to ocean-bottom seismometer acquisitions, even for a favourable time sequence of shooting and spatial repeatability. Importantly, the pressure signals on the near and far offset stacks commonly used in quantitative 4D seismic inversion are found to be inconsistent due to the acquisition timestamp. Saturation changes at the boundaries of fluid fronts appear to show a similar inconsistency across sub-stacks. We recommend that 4D data are shot in a consistent manner to optimize aerial time coverage, and that additionally, the timestamp of the acquisition should be used to optimize pre-stack quantitative reservoir analysis.     

Assessment of H<Subscript>2</Subscript>S emission hazards into tunnels: the Nosoud tunnel case study from Iran

The presence of a gassy ground condition is an important problem in tunneling. In this study, the effects of groundwater H₂S and CH₄ emissions are investigated and characterized together with the factors that created these conditions in Nosoud tunnel in Iran. Through the geological investigations, the presence of these gasses was not detected prior to the construction of the tunnel. Groundwater sampling indicated that about 1 L of H₂S is released per 100 L of the water inflow into the Nosoud tunnel under normal conditions. However, the volume of the released gas was varying with the changes in the groundwater discharge rate. Thus, estimation of groundwater inflow into the tunnel is necessary for predicting the volume of gas emission. Based on the experience of the Nosoud tunnel excavations, there are several geological and hydrogeological factors that must be considered as the indicators of gas emissions during tunneling. Considering the importance of ground water gas emission into the tunnels located in gassy conditions, the present work was conducted to predict the H₂S seepage before the excavation using geological and hydrogeological indicators.     

Recent developments of the Middle East catalog

This article summarizes a recent study in the framework of the Global Earth model (GEM) and the Earthquake Model of the Middle East (EMME) project to establish the new catalog of seismicity for the Middle East, using all historical (pre-1900), early and modern instrumental events up to 2006. According to different seismicity, which depends on geophysical, geological, tectonic, and seismicity data, this region is subdivided to nine subregions, consisting of Alborz–Azerbaijan, Afghanistan–Pakistan, Saudi Arabia, Caucasus, Central Iran, Kopeh–Dagh, Makran, Zagros, and Turkey (Eastern Anatolia; after 30° E). After omitting the duplicate events, aftershocks, and foreshocks by using the Gruenthal method, and uniform all magnitude to Mw scale, 28,244 main events remain for the new catalog of Middle East from 1250 B.C. through 2006. The magnitude of completeness (Mc) was determined as 4.9 for five out of nine subregions, where the least values of Mc were found to be 4.2. The threshold of Mc is around 5.5, 5.0, 4.5, and 4.0, for the time after 1950, 1963, 1975, and 2000, respectively. The average of teleseismic depths in all regions is less than 15 km. Totally, majority of depth for Kopeh–Dagh and Central Iran, Zagros, and Alborz–Azerbaijan, approximately, is 15, 13, and 11 km and for Afghanistan–Pakistan, Caucasus, Makran, Turkey (after 30° E), and Saudi Arabia is about 9 km.     

A new look at the phenomenon of offshore pile plugging

Abstract

Open‐pipe piles are widely used for offshore structures. During the initial stage of installation, soil enters the pile at a rate equal to the pile penetration. As penetration continues, the inner soil cylinder may develop sufficient frictional resistance to prevent further soil intrusion, causing the pile to become plugged. The open‐ended pile then assumes the penetration characteristics of a closed‐ended pile. The mode of pile penetration significantly alters the soil‐pile interaction during and after installation. This affects the ultimate static bearing capacity (mainly in granular materials), the time‐dependent pile capacity (in clays), and the dynamic behavior and analysis of the piles.

Following a summary demonstrating the effects of pile plugging, a review of the common view of offshore pile plugging is undertaken. The interpretation of plugging by referring to the average plug length has led to the erroneous conclusion that in most piles significant plugging action does not occur.

Establishment of an analogy between soil samplers and open‐ended piles enabled correct identification of plugging by referring to the incremental changes in plug length. Examination of case histories of plugging of offshore piles revealed that beyond a certain penetration depth‐to‐diameter ratio, most piles are plugged.     

Dead Sea Basin Imaged by Ambient Seismic Noise Tomography

In the framework of the Dead Sea Integrated Research project (DESIRE), 59 seismological stations were deployed in the region of the Dead Sea Basin. Twenty of these stations recorded data of sufficiently high quality between May and September 2007 to be used for ambient seismic noise analysis. Empirical Green’s functions are extracted from cross-correlations of long term recordings. These functions are dominated by Rayleigh waves, whose group velocities can be measured in the frequency range from 0.1 to 0.5 Hz. Analysis of positive and negative correlation lags of the Green’s functions makes it possible to identify the direction of the source of the incoming energy. Signals with frequencies higher than 0.2 Hz originate from the Mediterranean Sea, while low frequencies arrive from the direction of the Red Sea. Travel times of the extracted Rayleigh waves were measured between station pairs for different frequencies, and tomographically inverted to provide independent velocity models. Four such 2D models were computed for a set of frequencies, all corresponding to different sampling depths, and thus together giving an indication of the velocity variations in 3D extending to a depth of 10 km. The results show low velocities in the Dead Sea Basin, consistent with previous studies suggesting up to 8 km of recent sedimentary infill in the Basin. The complex structure of the western margin of the Basin is also observed, with sedimentary infill present to depths not exceeding 5 km west of the southern part of the Dead Sea. The high velocities associated with the Lisan salt diapir are also observed down to a depth of ~5 km. The reliability of the results is confirmed by checkerboard recovery tests.     

Estimating the Shapes of Gravity Sources through Optimized Support Vector Classifier (SVC)

In gravity interpretation methods, an initial guess for the approximate shape of the gravity source is necessary. In this paper, the support vector classifier (SVC) is applied for this duty by using gravity data. It is shown that using SVC leads us to estimate the approximate shapes of gravity sources more objectively. The procedure of selecting correct features is called feature selection (FS).In this research, the proper features are selected using inter/intra class distance algorithm and also FS is optimized by increasing and decreasing the number of dimensions of features space. Then, by using the proper features, SVC is used to estimate approximate shapes of sources from the six possible shapes, including: sphere, horizontal cylinder, vertical cylinder, rectangular prism, syncline, and anticline. SVC is trained using 300 synthetic gravity profiles and tested by 60 other synthetic and some real gravity profiles (related to a well and two ore bodies), and shapes of their sources estimated properly.     

Comparison of two intelligent models to estimate the instantaneous global solar radiation in semi-arid climate conditions: Application in Iran

Solar radiation incident on the earth’s surface is a fundamental input for many aspects of climatology, hydrology, biology, and architecture. In addition, it is an important parameter in solar energy applications. Due to the high cost of the measuring instruments of solar radiation, many researchers have suggested different empirical methods to estimate this essential parameter. In this study, with the help of fuzzy systems and neural networks, two models have been designed to estimate the instantaneous global solar radiation in Rafsanjan city which has a typical climatic conditions of semi-arid region of middle eastern countries. In fuzzy and neural network model, the inputs are the number of the given day in the year, time, ambient temperature and cloudiness, The comparison between the results of the models and the measurements, shows that the estimated global radiation is similar to the measurement; for fuzzy model, statistical indicators RMSE, MBE and t-test are 103.4367 \((\hbox {w/m}^{2})\), 4.1169 \((\hbox {w/m}^{2})\) and 9.1318, respectively and for ANN, they are 85.46 \((\hbox {w/m}^{2})\), 3.08 \((\hbox {w/m}^{2})\) and 5.41, respectively. As the results indicate, both models are able to estimate the amount of radiation well, while the neural network has a higher accuracy. The output of the modes for six other cities of Iran, with similar climate conditions, also proves the ability of the proposed models.