GIS-based landslide susceptibility evaluation using fuzzy-AHP multi-criteria decision-making techniques in the Abha Watershed,Saudi Arabia

Landslides are natural geological disasters causing massive destructions and loss of lives, as well as severe damage to natural resources, so it is essential to delineate the area that probably will be affected by landslides. Landslide susceptibility mapping (LSM) is making increasing implications for GIS-based spatial analysis in combination with multi-criteria evaluation (MCE) methods. It is considered to be an effective tool to understand natural disasters related to mass movements and carry out an appropriate risk assessment. This study is based on an integrated approach of GIS and statistical modelling including fuzzy analytical hierarchy process (FAHP), weighted linear combination and MCE models. In the modelling process, eleven causative factors include slope aspect, slope, rainfall, geology, geomorphology, distance from lineament, distance from drainage networks, distance from the road, land use/land cover, soil erodibility and vegetation proportion were identified for landslide susceptibility mapping. These factors were identified based on the (1) literature review, (2) the expert knowledge, (3) field observation, (4) geophysical investigation, and (5) multivariate techniques. Initially, analytical hierarchy process linked with the fuzzy set theory is used in pairwise comparisons of LSM criteria for ranking purposes. Thereafter, fuzzy membership functions were carried out to determine the criteria weights used in the development of a landslide susceptibility map. These selected thematic maps were integrated using a weighted linear combination method to create the final landslide susceptibility map. Finally, a validation of the results was carried out using a sensitivity analysis based on receiver operator curves and an overlay method using the landslide inventory map. The study results show that the weighted overlay analysis method using the FAHP and eigenvector method is a reliable technique to map landslide susceptibility areas. The landslide susceptibility areas were classified into five categories, viz. very low susceptibility, low susceptibility, moderate susceptibility, high susceptibility, and very high susceptibility. The very high and high susceptibility zones account for 15.11% area coverage. The results are useful to get an impression of the sustainability of the watershed in terms of landsliding and therefore may help decision makers in future planning and mitigation of landslide impacts.     

Metasomatism and origin of glass in the lithospheric mantle xenoliths beneath Ain Temouchent area (North-West Algeria)

A spinel ± amphibole ± feldspar bearing Iherzolites, a spinel ± amphibole ± feldspar bearing harzburgites, and a spinel ± amphibole ± phlogopite bearing wehrlites are metasomatized peridotitic mantle xenoliths from Ain Temouchent volcanic complex (North-West Algeria). These xenoliths are metamorphic/deformed rocks with a strong planar fabric typical of mantle tectonites. The wehrlites are not the result of a simple model of partial melting. The spinel ± amphibole ± feldspar bearing harzburgites and lherzolites exhibit asymmetric concave-shaped REE patterns. These indicate that an earlier partial melting event was followed by metasomatic processes. The wehrlites have higher REE concentrations and LREE/HREE fractionations, indicating a sequential evolution of wehrlites from previous refractory material with melting as an addition process. This process reflects the interaction of the lithospheric mantle beneath the Ain Temouchent area with basaltic melt. Metasomatism is expressed by the formation of amphibole, phlogopite, and increased abundances of clinopyroxene at the expense of orthopyroxene, in lherzolite and harzburgite. In the Ain Temouchent area, metasomatizing agents are Na-alkali silicates. The similarities observed between the glasses studied in this paper, and the basaltic host rocks of the Ain Temouchent area, may suggest a common mantle source, or with chemical similarities but with relatively different evolutions pathways. The formation of glass in wehrlites from the Ain Temouchent area has an origin formed by the breakdown of amphibole or phlogopite as a result of decompressional melting and production of silica-undersaturated glasses. The glass reacts with essentially orthopyroxene to produce silica-rich glasses. This study has contributed to highlighting a relationship between glass, and the processes that caused the formation of metasomatic phases.     

Loss on ignition vs. thermogravimetric analysis: a comparative study to determine organic matter and carbonate content in sediments

Journal of Paleolimnology - Mass loss at specified temperatures has been used widely to determine amounts of organic matter and carbonate in sediment samples. The loss on ignition (LOI) method is...     

The Use of Municipal Solid Waste Incinerator Ash to Stabilize Dune Sands

Dune sands are problematic soils because they have low shear strength and are susceptible to collapse upon wetting. Dosages of municipal solid waste incinerator ash between 10 and 80?% were used to improve the engineering properties of dune sands. The soil-ash mixtures were allowed to cure for periods from 7 to 90?days. Laboratory tests such as compaction, unconfined compression, shear box and hydraulic conductivity tests were performed to measure the engineering characteristics of the stabilized material. The results showed that the maximum dry density remains approximately constant up to ash content of 30?% and then it decreases with the increase in ash content. The optimum water content increases with the increase in ash content. The unconfined compressive strength substantially increases with ash content up to 30?% and then decreases with the increase in ash content. The angle of friction follows similar trend to the unconfined compressive strength. However, the cohesion shows a steady increase with the ash content. The hydraulic conductivity of the stabilized material consistently decreases with the increase in the ash content. The effect of curing time on the hydraulic conductivity is minimal after 7?days of curing time. However, the unconfined compressive strength and the cohesion slightly increased with curing time up to 90?days.     

Treatment of Collapsibility of Gypseous Soils by Dynamic Compaction

Gypseous soils are distributed in vast areas and various regions of Iraq and other countries. Many foundation failure problems that occur in these soils are associated with percolation of water and dissolution of gypsum. Many attempts were made by several researchers to treat and improve the properties of gypseous soils to decrease the dissolution of gypsum and collapse potential of these soils. The purpose of the present work is to investigate the effect of dynamic compaction process on the behaviour of gypseous soils. Extensive laboratory tests are carried out to study the geotechnical properties and the behaviour of three gypseous soils of different gypsum contents; 60.5, 41.1 and 27?%. The tests included compaction characteristics, compressibility, and collapsibility tests for samples tested before and after treatment by dynamic compaction process under different number of blows, falling weights and heights of falling of the weights. Three weights are used to compact the samples, namely; 2, 3 and 5?kg. The number of blows is varied between 20 and 40, while three heights of drop are tried (35, 50 and 65) cm. The results showed that the best improvement in compressibility is achieved when the sample is compacted by 20 blows; above this number a negligible decrease in the compression index C_C is obtained. As the gypsum content increases, the dynamic compaction has greater effect on improvement of compressibility of the soil, while as the height of drop increases, the compression index C_C decreases.     

The particular “rammed earth” of the Saadian sugar refinery of Chichaoua (XVIth century,Morocco): mineralogical,chemical and mechanical characteristics

This work focuses on the building material used in the Saadian sugar refinery of Chichaoua (about 70 km southwest of Marrakesh). The study involved a classification of different types of rammed earth, followed by their mineralogical characterization based on optical microscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD). These studies are complemented by chemical investigations, X-ray fluorescence, and thermal analysis (DTA and TGA). The results demonstrate the use of two types of earth for the realisation of rammed earth, the first one non-plastic, -grained with added lime, the other one of low plasticity, and fine grained without addition of lime. Mechanical tests on site and in laboratory how at the first type of material exhibits great strength, exceeding the values known for rammed earth.     

3D geomodeling of the Lower Cretaceous oil reservoir, Masila oil field, Yemen

Oil was first discovered in the Masila area of Yemen in the late 1990s, with about 90% of the reserves found in the Lower Qishn Clastic Member of the Qishn Formation. The porosity determinations of the Lower Qishn Clastic are relatively high and the permeability ranges from 103 to 374?md. This paper tries to evaluate the hydrocarbons in the porous zones encountered in the Lower Cretaceous formations, which were penetrated by the eight wells in the study area. The water saturation shows low values, while the hydrocarbon saturation is in a reverse relation, i.e., the hydrocarbon increases where the water saturation decreases. Different cross-plots such as Rho-PHIN, Rho-DTN, and M-N were used in lithological identification for the two studied formations (Saar and Qishn) in the studied wells. Formation evaluation and presentation forms of the obtained petrophysical parameters have frequently proven that the formations have high hydrocarbon saturation in this area and contain many pay zones. On of the main targets of this paper is to build a detailed 3D geological modeling of the Lower Cretaceous Sequence conducted through an integrated study.     

Lithostratigraphy and standard microfacies types of the Neogene carbonates of Rabigh and Ubhur areas, Red Sea coastal plain of Saudi Arabia

The Neogene carbonate rocks have relatively small exposure relative to the siliciclastic and evaporite rocks in Rabigh and Ubhur areas, north Jeddah, Red Sea coastal plain of Saudi Arabia. The Miocene carbonates form small hills in both areas, which conformably overlie the siliciclastics, whereas the Pleistocene coral reefs form terraces facing the Red Sea in Rabigh area. The Neogene carbonates are represented by the following microfacies types: (1) dolomitic, oolitic, foraminiferal packstone; (2) sandy, dolomitic, intraclastic, foraminiferal packstone; (3) dolomitic and oolitic wackestone; (4) dolomitic, foraminiferal, intraclastic wackestone; (5) dolomitic mudstone; (6) coral boundstone; and (7) grainstone. The diagenetic processes affecting these carbonates are compaction, dissolution, aggrading neomorphism, and replacement that took place during deposition, shallow burial, and uplift. Pervasive dolomitization by the seepage reflux mechanism is responsible for the mimic replacement of the calcite of the original component of the limestone with dolomite. Sediments, biota, and lithofacies characteristics of the studied carbonate rocks of Rabigh and Ubhur areas indicate the presence of three facies zones; these are (1) FZ 5 platform margin reefs, (2) FZ 6 (platform margin sand shoals), and (3) FZ 7 platform interior-normal marine. The standard microfacies types are represented by (1) SMF 12, limestone with shell concentration; (2) SMF 15, oolitic wackestone and packstone; and (3) SMF 18, bioclastic grainstone and packstone with abundant benthic foraminifera.     

Dust storms loads analyses—Iraq

The dust storms that blow over Iraq were studied from December 2008 to March 2009. The total number of studied dust storms was eight; during each dust storm, samples were collected from the cities of Baghdad, Ramadi, Kut, Basra, Najaf, Karbala, Hilla and Tikrit. The climatic elements with the dust storms types were studied. The results of dust storms analyses reflect their increase in average toward the southwestern direction (average suspended, rising, regional dust storms were 8, 10, 15 days/year, respectively). The average means annual rainfall (in mm), evaporation (in mm), temperature (in °C), and relative humidity percentage indicate that there were remarkable variations in values, with increase of the number of days/years of the dust storms reflecting the effect of the regional climatic change. The results of particle size analyses indicate the texture of most samples range from sandy clayey silt (75%) and clayey sandy silt (25%), and the average dominant grain size have a direct relationship with trajectories of dust storms. Quartz grains were 15% rounded and 85% sub-rounded. Moreover, the dust samples were analyzed and identified by using XRD analyses and Polaroid microscope. The results reflect the following minerals according to their average relative dominant, quartz 58.6%, feldspars 17.3%, and calcite 15.4%, with small amount of gypsum 5.5%. The clay minerals (chlorite, illite, montmorillonite, palygorskite, and kaolinite) were recognized. The analyses of heavy minerals percentages by using the microscope were performed. The results of pollen distribution, in descending order, were Chenopodiaceous, Graminea, Pine, Artemisia, Palmae, Olea, and Typha (reaching 79%, 69%, 63%, 53%, 17%, 9%, and 7% of the counted pollen grains, respectively). The results of microorganisms (i.e., isolated bacteria and fungi), in descending order, were the gram-positive Bacillus species (42.9%), Aspergillus species plus Candida albicans (13.8%), and (8.4%), the gram-negative rods, Escherichia coli (9.5%), the gram-positive Cocci streptococcus pneumonia (6.7%), then the gram-negative rod Enterobacter cloacae (4.3%), Staphylococcus epidermidis, and Staphylococcus (3.9%) and (1.9%). The remaining Gram-negative microorganisms were Pseudomonas aeruginosa (2.7%). Regarding the viral etiology, there is no viral isolate among the work results. The allergens commonly associated with dust storms include fungal spores, plant and grass pollens, and organic detritus represent agricultural area pollen grains.     

Land transformation assessment using the integration of remote sensing and GIS techniques: a case study of Al-Anbar Province,Iraq

Human activities and climate changes significantly affect our environment, altering hydrologic cycles. Several environmental, social, political, and economical factors contribute to land transformation as well as environmental changes. This study first identified the most critical factors that affect the environment in Al-Anbar city including population growth, urbanization expansion, bare land expansion, and reduction in vegetation cover. The combination of remote sensing data and fuzzy analytic hierarch process (Fuzzy AHP) enabled exploration of land transformations and environmental changes in the study area during 2001 to 2013 in terms of long and short-term changes. Results of land transformation showed that the major changes in water bodies increased radically (94 %) from the long-term change in 2001 to 2013 because of water policies. In addition, the urban class expanded in two short-term periods (2001–2007 and 2007–2013), representing net changes of 46 and 60 %, respectively. Finally, barren land showed 25 % reduction in the first period because of the huge expansion of water in the lake; a small percentage of growth gain was observed in the second period. Based on the land transformation results, the environmental degradation assessment showed that the study area generally had high level of environmental degradation. The degradation was mostly in the center and the north part of the study area. This study suggested for further studies to include other factors that also responsible for environmental degradation such as water quality and desertification threatening.