Use of electrical resistivity tomography in delineating zones of groundwater potential in arid regions: a case study from Diriyah region of Saudi Arabia

A detailed geophysical investigation in the form of electrical resistivity tomography (ERT) was carried out using the SYSCAL Pro Unit at two locations with a dipole?Cdipole configuration in one of the private farms in Diriyah area of Riyadh, Saudi Arabia with the purpose of delineating the approximate depth of the water-bearing formations. The survey helped in delineating a superficial moist zone at the first site which was mainly due to the seepage from surface water pipes used for irrigating the date palms. At the second site, a potential water-bearing zone was detected starting from a depth of 23 to 46?m. However, an already existing bore well in close vicinity of the site of the second survey showed a water table depth of 85?m, indicating the presence of a layered aquifer. Finally, it was concluded that a shallow bore well drilled up to a depth of 50?C60?meters would be able to tap the water resources of shallow water-bearing horizon discovered at the second site during the survey; however, the yield of the bore well might not be sustainable over a longer period of time. The survey at the first site did not show any promising groundwater potential up to the investigated depth which was around 70?m. The study confirms the usage of ERT surveys for exploring sources of freshwater supplies in arid regions.     

Benthic nutrient fluxes along the Laurentian Channel: Impacts on the N budget of the St. Lawrence marine system

Water column concentrations and benthic fluxes of dissolved inorganic nitrogen (DIN) and oxygen (DO) were measured in the Gulf of St. Lawrence and the Upper and Lower St. Lawrence Estuary (USLE and LSLE, respectively) to assess the nitrogen (N) budget in the St. Lawrence (SL) system, as well as to elucidate the impact of bottom water hypoxia on fixed-N removal in the LSLE. A severe nitrate deficit, with respect to ambient phosphate concentrations (N*∼−10 μmol L⁻¹), was observed within and in the vicinity of the hypoxic bottom water of the LSLE. Given that DO concentrations in the water column have remained above 50 μmol L⁻¹, nitrate reduction in suboxic sediments, rather than in the water column, is most likely responsible for the removal of fixed N from the SL system. Net nitrate fluxes into the sediments, derived from pore water nitrate concentration gradients, ranged from 190 μmol m⁻² d⁻¹ in the hypoxic western LSLE to 100 μmol m⁻² d⁻¹ in the Gulf. The average total benthic nitrate reduction rate for the Laurentian Channel (LC) is on the order of 690 μmol m⁻² d⁻¹, with coupled nitrification-nitrate reduction accounting for more than 70%. Using average nitrate reduction rates derived from the observed water column nitrate deficit, the annual fixed-N elimination within the three main channels of the Gulf of St. Lawrence and LSLE was estimated at 411 × 10⁶ t N, yielding an almost balanced N budget for the SL marine system.     

Geostatistics as a groundwater exploration planning tool: case of a brackish-saline aquifer

This paper discusses a geostatistical approach to model a groundwater aquifer in 3-D. The study aims at utilizing geostatistics as a tool for characterizing zones of better-water quality in a brackish-saline aquifer. In particular, the geostatistical model was constructed to characterize the aquifer’s salinity, represented by total dissolved solids (TDS), using logs of porosity and resistivity. Quality-checked estimated TDS vertical profiles were employed to construct and model horizontal and vertical semivariograms. Parameters of semivariogram models were used to develop both the kriging plan and the generated model. Results of this modeling process are shown in the form of horizontal salinity distribution maps. The aquifer was sliced into 20 layers, each 20 m thick, to represent its overall thickness. Salinity layers maps reflect vertical stratification of TDS concentrations in the aquifer and show that water quality deteriorates with depth and toward the northern part of the aquifer. Relatively better-quality water (TDS ≤10,000 mg/l) can be found at depths between 100 and 250 m below the aquifer’s top in both eastern and southeastern parts. Water in the same interval to the western and southwestern parts reflects the presence of higher TDS concentration. From a planning point of view, it is more feasible to target the eastern part of the aquifer for pumping and desalination purposes. In addition, the generated model could be utilized as an initial condition for flow simulation.     

Simulating urban growth in a megalopolitan area using a patch‐based cellular automata

Although traditional cellular automata (CA)‐based models can effectively simulate urban land‐use changes, they typically ignore the spatial evolution of urban patches, due to their use of cell‐based simulation strategies. This research proposes a new patch‐based CA model to incorporate a spatial constraint based on the growth patterns of urban patches into the conventional CA model for reducing the uncertainty of the distribution of simulated new urban patches. In this model, the growth pattern of urban patches is first estimated using a developed indicator that is based on the local variations in existing urban patches. The urban growth is then simulated by integrating the estimated growth pattern and land suitability using a pattern‐calibrated method. In this method, the pattern of new urban patches is gradually calibrated toward the dominant growth pattern through the steps of the CA model. The proposed model is applied to simulate urban growth in the Tehran megalopolitan area during 2000–2006–2012. The results from this model were compared with two common models: cell‐based CA and logistic‐patch CA. The proposed model yields a degree of patch‐level agreement that is 23.4 and 7.5% higher than those of these pre‐existing models, respectively. This reveals that the patch‐based CA model simulates actual development patterns much better than the two other models.     

Scaling property of regional floods in New South Wales Australia

Regional flood frequency analysis (RFFA) is often used in hydrology to estimate flood quantiles when there is a limitation of at-site recorded flood data. One of the commonly used RFFA methods is the index flood method, which is based on the assumptions that a region satisfies criterion of simple scaling and it can be treated homogeneous. Another RFFA method is quantile regression technique where prediction equations are developed for flood quantiles of interest as function of catchment characteristics. In this paper, the scaling property of regional floods in New South Wales (NSW) State in Australia is investigated. The results indicate that the annual maximum floods in NSW satisfy a simple scaling assumption. The application of a heterogeneity test, however, reveals that NSW flood data set does not satisfy the criteria for a homogeneous region. Finally, a set of prediction equations are developed for NSW using quantile regression technique; an independent test shows that these equations can provide reasonably accurate design flood estimates with a median relative error of about 27%.     

Surficial deposits on salt diapirs (Zagros Mountains and Persian Gulf Platform, Iran): Characterization, evolution, erosion and the influence on landscape morphology

The surfaces of salt diapirs in the Zagros Mountains are mostly covered by surficial deposits, which significantly affect erosion rates, salt karst evolution, land use and the density of the vegetation cover. Eleven salt diapirs were selected for the study of surficial deposits in order to cover variability in the geology, morphology and climate in a majority of the diapirs in the Zagros Mountains and Persian Gulf Platform. The chemical and mineralogical compositions of 80 selected samples were studied mainly by X-ray powder diffraction and X-ray fluorescence. Changes in salinity along selected vertical profiles were studied together with the halite and gypsum distribution. The subaerial residuum formed from minerals and rock detritus released from the dissolved rock salt is by far the most abundant material on the diapirs. Fluvial sediments derived from this type of residuum are the second most common deposits found, while submarine residuum and marine sediments have only local importance. The mineralogical/chemical composition of surficial deposits varies amongst the three end members: evaporite minerals (gypsum/anhydrite and minor halite), carbonates (dolomite and calcite) and silicates-oxides (mainly quartz, phyllosilicates, and hematite). Based on infiltration tests on different types of surficial deposits, most of the rainwater will infiltrate, while overland flow predominates on rock salt exposures. Recharge concentration and thick accumulations of fine sediment support relatively rich vegetation cover in some places and even enable local agricultural activity. The source material, diapir relief, climatic conditions and vegetation cover were found to be the main factors affecting the development and erosion of surficial deposits. A difference was found in residuum type and landscape morphology between the relatively humid NW part of the studied area and the arid Persian Gulf coast: In the NW, the medium and thick residuum seems to be stable under current climatic conditions. Large sinkholes and blind valleys with sinking streams are common. On other diapirs, the original thick residuum is undergoing erosion and the new morphology is currently represented by salt exposures and badland-like landscapes or by fields of small sinkholes developed in the thin residuum. Models for evolution of the subaerial residuum and the diapir landscape/morphology are described in this paper. While the thick residuum with vegetation has very low erosion rates, the salt exposures and thin residuum are eroded rapidly. During wet periods (e.g. early Holocene), the diapirs rose and salt glaciers expanded as the influx of salt mass was much faster compared to erosion. After the onset of an arid climate, c. 6 ka BP, the rising of the some diapir surfaces decreased or even reversed due to acceleration of erosion thanks to vegetation degradation and changes in the residuum type and thickness.     

Time independent seismic hazard analysis in Alborz and surrounding area

The Bayesian probability estimation seems to have efficiencies that make it suitable for calculating different parameters of seismicity. Generally this method is able to combine prior information on seismicity while at the same time including statistical uncertainty associated with the estimation of the parameters used to quantify seismicity, in addition to the probabilistic uncertainties associated with the inherent randomness of earthquake occurrence. In this article a time-independent Bayesian approach, which yields the probability that a certain cut-off magnitude will be exceeded at certain time intervals is examined for the region of Alborz, Iran, in order to consider the following consequences for the city of Tehran. This area is located within the Alpine-Himalayan active mountain belt. Many active faults affect the Alborz, most of which are parallel to the range and accommodate the present day oblique convergence across it. Tehran, the capital of Iran, with millions of inhabitants is located near the foothills of the southern Central Alborz. This region has been affected several times by historical and recent earthquakes that confirm the importance of seismic hazard assessment through it. As the first step in this study an updated earthquake catalog is compiled for the Alborz. Then, by assuming a Poisson distribution for the number of earthquakes which occur at a certain time interval, the probabilistic earthquake occurrence is computed by the Bayesian approach. The highest probabilities are found for zone AA and the lowest probabilities for zones KD and CA, meanwhile the overall probability is high.     

Diagenetic evolution vis-a-vis reservoir characteristics of Dhosa sandstones,Ler dome,Kachchh, western India

The detrital mineralogy as well as diagenetic characters of the Dhosa Sandstone Member of Chari Formation exposed at the Lerdome, south of Bhuj was studied. In order to assess the potential of the Dhosa Sandstone as a reservoir, it is substantial to understand the diagenetic processes that are controlled largely by post-depositional cementation and compaction in addition to framework composition and original depositional textures. The petrologic analysis of 33 thin sections was carried out to discern primary composition and diagenetic features including primary and secondary porosity patterns. Monocrystalline quartz dominates the detrital mineralogy followed by polycrystalline quartz. Among the polycrystalline variety recrystallized metamorphic quartz surpasses stretched metamorphic quartz in terms of abundance. Feldspars comprise microcline and plagioclase where the former is dominant over the latter. Orthoclase too comprises a very small percentage. Mica, chert, rock fragments, and heavies form the remaining detrital constituent in descending order of their constituent percentage. The diagenetic precipitates are mainly carbonate (8.30%) and iron (7.80%) followed by clay (0.66%) and silica (0.88%) that are minor constituent of the total cementing material. The main paragenetic events identified are early cementation, mechanical compaction, late cementation, dissolution, and authigenesis of clays. The overall reservoir quality seems to be controlled by compaction and authigenic carbonate cementation. The minus cement porosity average 29.4%. The porosity loss due to compaction is 21.92% and by cementation is 29.71%. The loss of original porosity was due to early cementation followed by moderate mechanical compaction during shallow burial. Preservation of available miniscule primary porosity was ascribed to dissolution of carbonates and quartz overgrowth which resisted chemical compaction during deep burial. The studied sandstones may have low reservoir quality owing to existing porosity of less than 9%. More carbonate dissolution and its transformation in dolomite in sub-surface condition and macro-fracture porosity may result in enhanced secondary porosity and good diagenetic traps.     

Petrogenesis and tectonic association of rift-related basic Panjal dykes from the northern Indian plate,North-Western Pakistan: evidence of high-Ti basalts analogous to dykes from Tibet

Mineralogy and Petrology - Rift related magmatism during Permian time in the northern margin of Indian plate is represented by basic dykes in several Himalayan terranes including north western...