Denoising and improving the quality of seismic data using combination of DBM filter and FX deconvolution

Seismic data denoising, random noise attenuation (RNA) and spike-like noise suppression, is a main consideration for improving the quality of records. RNA could increase signal to noise ratio (S/N) to avoid misinterpretation of seismic data. In this research, a novel method is created by using the combination of frequency-offset deconvolution (FXD) and decision-based median (DBM) filter for RNA from seismic data. The method is applied in two main phases; FXD is focused to remove the Gaussian noise and DBM filter is focused to attenuate the impulsive noise and spikes. To implement and verify the method, three types of data are used: two synthetic models (a model with linear events and a model with hyperbolic events) and an observed seismic section. The ability of the proposed method (FXD-DBM) in comparison of applying each in seismic RNA application is proven. The noise level is reduced obviously, and hence, the S/N of all examined seismic records is increased considerably after denoising by the combination of FX deconvolution and DBM filter. About the real seismic section, suppressing random noise and spikes show up improving the seismic reflector continuity and hence enhancing the interpretability of data. Moreover, some masked events by random noise are clarified in different parts of data after denoising using the planned method.     

Thrust tectonics along the north-western continental margin of Sabah/Borneo

Widely accepted plate tectonic models suggest that an inactive subduction zone lies along the north-west continental margin of Sabah. In contrast, interpretation of reflection seismic data acquired by BGR shows an autochthonous continental terrane comprising an Oligocene to Early Miocene carbonate platform being progressively overthrust by an allochthonous rock complex. Progressive compression resulted in the development of four structural zones: Imbricated thrust sheets (Zone III); two thrust sheet systems one on top of the other (Zone IV); a complex zone with multiphase deformation (Zone V); and piercement ridges (Zone VI).

---

Zusammenfassung Nach herkömmlichen plattentektonischen Vorstellungen soll eine inaktive Subduktionszone am nordwestlichen Kontinentalrand von Sabah liegen. Reflexionsseismische Meßdaten der BGR zeigen jedoch, daß hier autochthone kontinentale Kruste mit einer oligozänen-frühmiozänen Karbonatplattform progressiv von einem allochthonen Gesteinsverband überschoben wird. Fortschreitender Zusammenschub seit dem frühen Miozän führte zur Anlage von vier Deformationszonen: Tekonische Schuppen (Zone III); zwei übereinander geschobene Verschuppungssysteme (Zone IV); Gürtel mit mehrphasiger Deformation (Zone V) und Durchspießungsstrukturen (Zone VI).

---

Résumé Les modèles géodynamiques que l'on admet habituellement comportent une zone de subduction inactive le long de la marge continentale nord-occidentale de Sabah. Toutefois, des mesures de sismique-réflexion exécutées par le BGR font apparaître qu'à cet endroit, une croûte continentale autochtone, comportant une plateforme carbonatée oligocène à éomiocène, est chevauchée progressivement par un complexe allochtone. La compression, qui s'est manifestée progressivement depuis le Miocène inférieur, a engendré quatre zones structurales: un ensemble d'écailles tectoniques (zone III); deux systèmes de lames tectoniques charriés l'un sur l'autre (zone IV); une zone complexe à déformation multiphasée (zone V); des structures d'extrusion tectonique (zone VI).

---

, - Sabah'a. , - . 4-? : ( 3), ( 4) ( 5) ( 6).

     

A probabilistic tsunami hazard assessment for the Makran subduction zone at the northwestern Indian Ocean

A probabilistic tsunami hazard assessment is performed for the Makran subduction zone (MSZ) at the northwestern Indian Ocean employing a combination of probability evaluation of offshore earthquake occurrence and numerical modeling of resulting tsunamis. In our method, we extend the Kijko and Sellevoll’s (1992) probabilistic analysis from earthquakes to tsunamis. The results suggest that the southern coasts of Iran and Pakistan, as well as Muscat, Oman are the most vulnerable areas among those studied. The probability of having tsunami waves exceeding 5 m over a 50-year period in these coasts is estimated as 17.5%. For moderate tsunamis, this probability is estimated as high as 45%. We recommend the application of this method as a fresh approach for doing probabilistic hazard assessment for tsunamis. Finally, we emphasize that given the lack of sufficient information on the mechanism of large earthquake generation in the MSZ, and inadequate data on Makran’s paleo and historical earthquakes, this study can be regarded as the first generation of PTHA for this region and more studies should be done in the future.     

Sediment settling in the Latian Dam in Iran

Among the difficulties that influence future dam operations,reservoir sedimentation is the most problematic for engineers.This study predicted the amount and pattern of sedimentation for use in estimation of the useful lifespan of reservoirs and identification of optimal locations for outlets and intakes at the initial stages of dam design.Hydrographic surveys of different dams can provide better insight into this phenomenon.Latian Dam in Iran has conducted hydrographic surveys during 7 time periods.The amount and process of sedimentation in this reservoir were determined,and predictions of distribution of sediments were validated by well-known,common methods.The formation of a delta in the reservoir was investigated for different time periods after operation.Future problems due to the impacts of sedimentation on dam operation and the useful lifespan of the reservoir were predicted.In addition,the study results may be used for developing empirical methods to predict sedimentation patterns in other reservoirs.     

Determining the hard rock groundwater pathway in Golgohar complex formation using hydrochemical data in AHP

Thirty percent of present industrial water consumption of the Golgohar Iron Ore Mine (GIOM) is supplied from a hard rock well (PW-A15) and the rest from 25 wells located in 4 disconnected alluvial aquifers. This well is drilled in the metamorphic complex of Golgohar formation. Attempts have been made to develop extraction of water from other hard rocks existing in the area with no success. Therefore, extensive researches have been carried out to find the pathway, or a provision pathway of water discharged from this well. To study the hydrochemical similarity of this water with other water resources, 122 water samples from an area of 7132 km² were collected from the existing pumping wells, piezometers, mine exploration bore holes, and three salt pans in the vicinity of the area for hydrochemical analysis. The analyses were performed for concentration of major ions and some minor elements. Furthermore, the spatial distribution of ion concentration was plotted in the GIS to delineate the similarity of the PW-A15 water with other water sources and their hydrochemical neighborhood by analytical hierarchy process (AHP). The AHP was performed in two steps: first, iso-concentration maps of seven major ions, eight minor elements, and TDS were used to produce an AHP map (Map1) using weights for different hydrochemical parameters; and second, a similarity index (SI) map was prepared by performing a suggested clustering approach in SPSS using K-means clustering, which was overlaid on Map1 producing Map2. The result of AHP Map2 was then overlaid on the iso-potential map of the sampled locations in GIS software using a mask operator. Therefore, the zones having the most similarity and higher hydraulic potential than PW-A15 were nominated as the zones which possibly could recharge this well, and the groundwater (GW) pathway was proposed. The result of the study method showed to be successful and will be used as a guide for future exploration drillings.     

Use of electrical resistivity tomography in delineating zones of groundwater potential in arid regions: a case study from Diriyah region of Saudi Arabia

A detailed geophysical investigation in the form of electrical resistivity tomography (ERT) was carried out using the SYSCAL Pro Unit at two locations with a dipole?Cdipole configuration in one of the private farms in Diriyah area of Riyadh, Saudi Arabia with the purpose of delineating the approximate depth of the water-bearing formations. The survey helped in delineating a superficial moist zone at the first site which was mainly due to the seepage from surface water pipes used for irrigating the date palms. At the second site, a potential water-bearing zone was detected starting from a depth of 23 to 46?m. However, an already existing bore well in close vicinity of the site of the second survey showed a water table depth of 85?m, indicating the presence of a layered aquifer. Finally, it was concluded that a shallow bore well drilled up to a depth of 50?C60?meters would be able to tap the water resources of shallow water-bearing horizon discovered at the second site during the survey; however, the yield of the bore well might not be sustainable over a longer period of time. The survey at the first site did not show any promising groundwater potential up to the investigated depth which was around 70?m. The study confirms the usage of ERT surveys for exploring sources of freshwater supplies in arid regions.     

Benthic nutrient fluxes along the Laurentian Channel: Impacts on the N budget of the St. Lawrence marine system

Water column concentrations and benthic fluxes of dissolved inorganic nitrogen (DIN) and oxygen (DO) were measured in the Gulf of St. Lawrence and the Upper and Lower St. Lawrence Estuary (USLE and LSLE, respectively) to assess the nitrogen (N) budget in the St. Lawrence (SL) system, as well as to elucidate the impact of bottom water hypoxia on fixed-N removal in the LSLE. A severe nitrate deficit, with respect to ambient phosphate concentrations (N*∼−10 μmol L⁻¹), was observed within and in the vicinity of the hypoxic bottom water of the LSLE. Given that DO concentrations in the water column have remained above 50 μmol L⁻¹, nitrate reduction in suboxic sediments, rather than in the water column, is most likely responsible for the removal of fixed N from the SL system. Net nitrate fluxes into the sediments, derived from pore water nitrate concentration gradients, ranged from 190 μmol m⁻² d⁻¹ in the hypoxic western LSLE to 100 μmol m⁻² d⁻¹ in the Gulf. The average total benthic nitrate reduction rate for the Laurentian Channel (LC) is on the order of 690 μmol m⁻² d⁻¹, with coupled nitrification-nitrate reduction accounting for more than 70%. Using average nitrate reduction rates derived from the observed water column nitrate deficit, the annual fixed-N elimination within the three main channels of the Gulf of St. Lawrence and LSLE was estimated at 411 × 10⁶ t N, yielding an almost balanced N budget for the SL marine system.     

Geostatistics as a groundwater exploration planning tool: case of a brackish-saline aquifer

This paper discusses a geostatistical approach to model a groundwater aquifer in 3-D. The study aims at utilizing geostatistics as a tool for characterizing zones of better-water quality in a brackish-saline aquifer. In particular, the geostatistical model was constructed to characterize the aquifer’s salinity, represented by total dissolved solids (TDS), using logs of porosity and resistivity. Quality-checked estimated TDS vertical profiles were employed to construct and model horizontal and vertical semivariograms. Parameters of semivariogram models were used to develop both the kriging plan and the generated model. Results of this modeling process are shown in the form of horizontal salinity distribution maps. The aquifer was sliced into 20 layers, each 20 m thick, to represent its overall thickness. Salinity layers maps reflect vertical stratification of TDS concentrations in the aquifer and show that water quality deteriorates with depth and toward the northern part of the aquifer. Relatively better-quality water (TDS ≤10,000 mg/l) can be found at depths between 100 and 250 m below the aquifer’s top in both eastern and southeastern parts. Water in the same interval to the western and southwestern parts reflects the presence of higher TDS concentration. From a planning point of view, it is more feasible to target the eastern part of the aquifer for pumping and desalination purposes. In addition, the generated model could be utilized as an initial condition for flow simulation.     

Scaling property of regional floods in New South Wales Australia

Regional flood frequency analysis (RFFA) is often used in hydrology to estimate flood quantiles when there is a limitation of at-site recorded flood data. One of the commonly used RFFA methods is the index flood method, which is based on the assumptions that a region satisfies criterion of simple scaling and it can be treated homogeneous. Another RFFA method is quantile regression technique where prediction equations are developed for flood quantiles of interest as function of catchment characteristics. In this paper, the scaling property of regional floods in New South Wales (NSW) State in Australia is investigated. The results indicate that the annual maximum floods in NSW satisfy a simple scaling assumption. The application of a heterogeneity test, however, reveals that NSW flood data set does not satisfy the criteria for a homogeneous region. Finally, a set of prediction equations are developed for NSW using quantile regression technique; an independent test shows that these equations can provide reasonably accurate design flood estimates with a median relative error of about 27%.