This paper discusses a geostatistical approach to model a groundwater aquifer in 3-D. The study aims at utilizing geostatistics as a tool for characterizing zones of better-water quality in a brackish-saline aquifer. In particular, the geostatistical model was constructed to characterize the aquifer’s salinity, represented by total dissolved solids (TDS), using logs of porosity and resistivity. Quality-checked estimated TDS vertical profiles were employed to construct and model horizontal and vertical semivariograms. Parameters of semivariogram models were used to develop both the kriging plan and the generated model. Results of this modeling process are shown in the form of horizontal salinity distribution maps. The aquifer was sliced into 20 layers, each 20 m thick, to represent its overall thickness. Salinity layers maps reflect vertical stratification of TDS concentrations in the aquifer and show that water quality deteriorates with depth and toward the northern part of the aquifer. Relatively better-quality water (TDS ≤10,000 mg/l) can be found at depths between 100 and 250 m below the aquifer’s top in both eastern and southeastern parts. Water in the same interval to the western and southwestern parts reflects the presence of higher TDS concentration. From a planning point of view, it is more feasible to target the eastern part of the aquifer for pumping and desalination purposes. In addition, the generated model could be utilized as an initial condition for flow simulation. 相似文献
Arabian Journal of Geosciences - In order to reconstruct sea surface water productivity and sea floor oxygenation during late Campanian-Maastrichtian, planktonic and benthic foraminiferal... 相似文献
For many decades most oil wells in Iran have produced using their natural flow potential and haven’t needed to be fractured. As time goes by, the reservoir pressure depletes and the need for hydraulic fracturing as a stimulation practice arises. Nonetheless there is no record of successful hydraulic fracturing in Iran.
The Bangestan reservoir with a suitable amount of oil in place and good rock reservoirs, has been selected for the present research work. In this work, the in situ stress profile was calculated by using the available petrophysical data. This is achieved by using poroelastic theory for the stresses, and the Mohr–Coulomb criterion to predict failure. The model leads to easily computed expressions for calculating the pressure required to maintain hydraulic fracturing. Then the appropriate depth for treatment was determined. The results indicate that Ilam and Sarvak formations could be good candidates for hydraulic fracturing. Then, for two layers, a hydraulic fracture was designed and the production was predicted and the Net Present Value (NPV) resulting from the fracture of both layers was investigated. 相似文献
Generalization and spatial contextual awareness are prevalent concepts in geographic information systems. This study adopted a context-dependent user-centred network generalization method to create a sub-network for optimal route finding. The results show an increase in the number of preferred traversed edges. A route presentation approach is suggested that is based on cognitively engineered user-oriented abstraction of street network. Successive abstractions hierarchize the street network to create a hierarchical presentation structure. The route is projected onto one level in the structure. Then, instead of showing the exact route, the network Voronoi regions represented by the projected route are shown. Experience indicates that the suggested method is an efficient way of route presentation for a hierarchical regionalized structure of a human cognitive map. 相似文献
Dust storm in the Middle East and south-west Asia is a natural hazard and the Tigris-Euphrates alluvial plain has been recognized as the main dust source in this area. In this study, more than 60 dust storms that occurred during the period 2003–2011 are investigated on the basis of MODIS satellite images, and 12 of the dust storms are selected for synoptic analysis using the NCEP-NCAR Reanalysis Data. The potential dust sources in the Middle East and south-west Asian region (20°E to 80°E, 5°N to 50°N) are analyzed and used in the synoptic analysis. Dust storms in the region can be grouped into two main categories, i.e., the Shamal dust storms and the frontal dust storms. Synoptic systems, associated with the two categories, are distinguished and the frequency of the patterns is identified. For 68% of the Shamal dust storms, a high pressure system is situated between 0°E to 30°E and 27°N to 45°N, and a low pressure system between 50°E to 70°E and 23°N to 43°N. For 86% of the frontal dust storms, a high is located between 51°E to 67°E and 18°N to 33°N and a low between 28°E to 48°E and 32°N to 43°N. Three main patterns for Shamal dust storms are identified, which represent about 60% of the Shamal dust storms. This analysis confirms that the Shamal is related to the anticyclones located over northern Africa to Eastern Europe and the monsoon trough over Iraq, southern Iran, Pakistan and the Indian Subcontinent. The analysis also shows that the main dust sink for the frontal dust storms in Tigris and Euphrates alluvial plain extends from center of Iraq to west and center of Iran and, in most severe cases, to northern Iran and the southern coast of the Caspian Sea. 相似文献
Erosion of geological units and sediment load in rivers can be considered as the serious problems in recent decades.Increasing sediment loads generate major hazards for water resources development,particularly in terms of loss of reservoir storage due to sedimentation and siltation of water distribution systems.In this paper,the performance of four sediment rating curve (SRC) development methods was evaluated for the Shirin Darreh River(SDR) basin (1750 km2),located in North Khorasan Province,Iran.Data of flow discharge (Q) and suspended sediment flux (SSF)(Q-SSF pairs,N=957)and daily flow discharge,recorded by the Regional Water Company of North Khorasan (RWCNK) at the Qaleh-Barbar (QB) gauging site during 1989-2018were used.The flow discharge classification method performed best by meeting the desired criteria of most statistical indices,including normalized root mean square error (NRMSE),mean bias error (MBE),mean absolute error (MAE),index of agreement (d),and coefficient of determination (R~2).Based on the optimized method,the rate of suspended sediment transportation at the study site was estimated about2.7×10~6 ton year~(-1).Erodibility of the exposed formations in the study area was estimated based on a factorial scoring model (FSM).Three indices,focused on the outcrop and erodibility,were calculated for the geological units at sub-basin and total scales.Marl deposits are the most extensive geological unit in the three sub-basins and the maximum formation outcrop ratio (FOR) and participation in erosion (PCE)were obtained for these rocks at total scale.In fact,marl unit can be regarded as the main source to supply the suspended sediments in the study basin. 相似文献
Characterizing the subsurface structure is an important parameter for the improvement of seismic hazard assessment.Due to the tectonic complexity of the earth,s... 相似文献
Stochastic Environmental Research and Risk Assessment - Land subsidence is a complicated hazard that artificial intelligence models can model it without approximation and simplification. In this... 相似文献