Investigation on the Effect of Geometrical and Geotechnical Parameters on Elongated Offshore Piles Using Fuzzy Inference Systems

Among numerous offshore structures used in oil extraction, jacket platforms are still the most favorable ones in shallow waters. In such structures, log piles are used to pin the substructure of the platform to the seabed. The pile’s geometrical and geotechnical properties are considered as the main parameters in designing these structures. In this study, ANSYS was used as the FE modeling software to study the geometrical and geotechnical properties of the offshore piles and their effects on supporting jacket platforms. For this purpose, the FE analysis has been done to provide the preliminary data for the fuzzy-logic post-process. The resulting data were implemented to create Fuzzy Inference System (FIS) classifications. The resultant data of the sensitivity analysis suggested that the orientation degree is the main factor in the pile’s geometrical behavior because piles which had the optimal operational degree of about 5° are more sustained. Finally, the results showed that the related fuzzified data supported the FE model and provided an insight for extended offshore pile designs.     

Application of the coral health chart to determine bleaching status of <Emphasis Type="Italic">Acropora downingi</Emphasis> in a subtropical coral reef

The ‘Coral Health Chart’ has become a popular tool for monitoring coral bleaching worldwide. The scleractinian coral Acropora downingi (Wallace 1999) is highly vulnerable to temperature anomalies in the Persian Gulf. Our study tested the reliability of Coral Health Chart scores for the assessment of bleaching-related changes in the mitotic index (MI) and density of zooxanthellae cells in A. downingi in Qeshm Island, the Persian Gulf. The results revealed that, at least under severe conditions, it can be used as an effective proxy for detecting changes in the density of normal, transparent, or degraded zooxanthellae and MI. However, its ability to discern changes in pigment concentration and total zooxanthellae density should be viewed with some caution in the Gulf region, probably because the high levels of environmental variability in this region result in inherent variations in the characteristics of zooxanthellae among “healthy” looking corals.     

Modeling core-scale permeability anisotropy in highly bioturbated “tight oil” reservoir rocks

A high-resolution simulation model of a heterogeneous low-permeability rock sample is used to investigate the effects of physical and biogenic sedimentary structures on scaling and anisotropy of absolute permeability at the core scale. Several simulation sub-samples with random locations and volumes were also selected for evaluation of the effects of scale and lithological composition on the calculated permeability. Vertical and horizontal permeability values (from whole core simulation) are in good agreement with routine core analysis (RCA) measurements from offsetting cores. Despite relatively good reservoir quality associated with geobodies of biogenic and relic bedding structures, results from the full diameter core simulation demonstrate that their limited volumetric abundance and restricted connectivity prevent these features from controlling fluid flow in these rocks. In fact, permeability seems to be dominated by the tighter encasing matrix, which exhibits average permeability values very close to those reported from RCA. Geometric averaging offers a better representation for the upscaling of horizontal permeability datasets; whereas, both geometric and harmonic averaging work similarly well for the vertical measurements. The methodology used in this work is particularly applicable to the detailed characterization of reservoir rocks with a high degree of heterogeneity caused by biological reworking and diagenesis.     

An integrated object-based image analysis and CA-Markov model approach for modeling land use/land cover trends in the Sarab plain

The present paper is an attempt to integrate a semi-automated object-based image analysis (OBIA) classification framework and a cellular automata-Markov model to study land use/land cover (LULC) changes. Land use maps for the Sarab plain in Iran for the years 2000, 2006, and 2014 were created from Landsat satellite data, by applying an OBIA classification using the normalized difference vegetation index, salinity index, moisture stress index, soil-adjusted vegetation index, and elevation and slope indicators. The classifications yielded overall accuracies of 91, 93, and 94% for 2000, 2006, and 2014, respectively. Finally, using the transition matrix, the spatial distribution of land use was simulated for 2020. The results of the study revealed that the number of orchards with irrigated agriculture and dry-farm agriculture in the Sarab plain is increasing, while the amount of bare land is decreasing. The results of this research are of great importance for regional authorities and decision makers in strategic land use planning.     

Morphometric analysis of Chattian–Early Aquitanian Miogypsinidae from Iraq and their stratigraphic distribution in the Arabian Tethys

A biometric study of Chattian–Early Aquitanian taxa from shallow marine transgressive carbonate deposits in the Oligo-Miocene sedimentary basin of Kirkuk, Iraq, provides new insight into their taxonomy, stratigraphy, and palaeobiogeography. Their evolution is based on a distinct change in general nepiont morphology, which agrees with the principle of nepionic acceleration. Each Miogypsinoides group is represented by more than one lineage. We demonstrate for the first time the parallel evolution of Miogypsina and Miogypsinoides in the late Chattian of north-eastern Iraq. We assign specimens into two lineage groups: Miogypsinoides formosensis of the Late Chattian, with smaller embryon and longer post-embryonic spirals, which evolved into Miogypsinoides bantamensis of the Early Aquitanian; and Miogypsinoides sivasensis, with shorter spirals and larger embryon, originally found in late Chattian to Early Aquitanian deposits. This group evolved into large embryon and longer post-embryonic spiral specimens of the upper Azkand Formation, assigned to Miogypsinoides dehaartii and associated with Miogypsina gunteri-basraensis and M. gunteri due to their peculiar morphological features. Miogypsina specimens are related to Miogypsina basraensis, which have much smaller embryon dimensions. This part of the sequence corresponds to Ms. formosensis and is overlain by a Miogypsina ex. interc. gunteri-basraensis succession, a composite species that evolved to Miogypsina gunteri, the most common Miogypsinids taxon in the carbonate upper Azkand Formation, thereby acting as a reference for the evolution of this taxon and its transition to M. ex. interc. tani-gunteri. Miogypsinoides evolution in the Iraqi sedimentary basin is similar to Western Tethys evolution yet differs from Indo-Pacific evolution.     

Impact of rock-water interactions and recharge on water resources quality of the Agadir-Essaouira basin,southwestern Morocco

The Agadir-Essaouira area in the occidental High Atlas Mountains of Morocco is characterized by a semi-arid climate. The scarcity and quality of water resources, exacerbated by long drought periods, constitute a major problem for a sustainable development of this region. Groundwater resources of carbonate units within Jurassic and Cretaceous aquifers are requested for drinking and irrigation purposes. In this study, we collected 84 samples from wells, boreholes, springs, and rivers. Hydrochemical and isotopic data were used to examine the mineralization and origin of water, which control groundwater quality. The chemical composition of water seems to be controlled by water-rock interactions, such as dissolution of carbonates (calcite and dolomite), weathering of gypsum, as well as ion exchange processes, which explain the observed variability. Stable isotopes results show that groundwater from the mainly marly Cretaceous aquifer are submitted to an evaporation effect, while samples from the chiefly calcareous Jurassic aquifer indicate a meteoric origin, due to a rapid infiltration of recharge runoff through the karstic outcrops. The low values of δ¹⁸O and δ²H suggest a local recharge from areas with elevations ranging from 400 to 1200 m for the Cretaceous aquifer and from 800 to 1500 m for the Jurassic units.     

Occurrence of jarosite within Quaternary coastal sabkha sediments in Kuwait,Arabian Gulf

X-ray diffractometer analysis and SEM investigation confirmed the occurrence of jarosite and alunogen minerals in the Quaternary siliciclastic sabkha sediments of northern Kuwait within the Bahrah oilfield area, Arabian Gulf. Jarosite is relatively abundant in a near-surface whitish sticky tidal muddy sand layer about 60 cm thick that overlies the ferruginous sandstone of the Oligo-Miocene Ghar Formation. Jarosite occurs as clusters of euhedral pseudo-cubes of about 1 μm in size and as agglomerated nanoglobules of 250 nm in size. A hypogenetic origin related to the reaction of sulfuric acid produced by the oxidation of H₂S associated with hydrocarbon gas seepages with K and Fe leachates is suggested. The restricted occurrence of jarosite within near-surface sabkha sediments may be attributed to limited tidal inundation and prevalence of arid climatic conditions.     

Geochemistry and origin of Dehoo manganese deposit,south Zahedan,southeastern Iran

Dehoo manganese deposit is located 52 km to the south of Zahedan in Sistan and Baluchestan Province, southeastern Iran. This deposit that lies in the central part of the Iranian Flysch Zone is lenticular in shape and lies above the micritic limestone-radiolarite cherts of the upper Cretaceous ophiolite unit. It is hosted within the reddish to brown radiolarite cherts and in places interlinks with them, so that the radiolarite chert packages play a key role for Mn mineralization in the region. Investigated ore-paragenetic successions and the geochemical characteristics of the Dehoo deposit were studied by means of major oxide, trace, and rare earth element (REE) contents that provide information as to the mineral origin. Strong positive correlations were found between major oxides and trace elements (Al₂O₃-TiO₂, r = 0.95; TiO₂-MgO, r = 0.94; Fe₂O₃-Al₂O₃, r = 0.90; MgO-Al₂O₃, r = 0.84; MgO-Fe₂O₃, r = 0.88; Fe₂O₃-TiO₂, r = 0.91; Fe₂O₃-K₂O, r = 0.74; Al₂O₃-K₂O, r = 0.69; Al₂O₃-V, r = 0.72; TiO₂-V, r = 0.73, and MgO-V, r = 0.69) that testify to the contribution of mafic terrigenous detrital material to the deposit. Chondrite-normalized REE patterns of all ore samples are characterized by negative Ce (0.06–0.15, average 0.10) and slightly positive Eu (0.29–0.45, average 0.36) anomalies. Based on ratios of Mn/Fe (average 56.23), Co/Ni (average 0.33), Co/Zn (average 0.38), U/Th (average 3.40), La/Ce (average 1.45), La_n/Nd_n (average 2.16), Dy_n/Yb_n (average 0.33), and light REE/heavy REE (average 8.40; LREE > HREE), as well as Ba (average 920 ppm) and total REE contents (average 6.96 ppm) negative Ce and positive Eu anomalies, Dehoo could be considered a predominantly submarine hydrothermal Mn deposit complemented by terrigenous detrital mafic material.     

A Workflow for Static Reservoir Modeling Guided by Seismic Data in a Fluvial System

Realistic and accurate static geologic models are an essential element needed to predict the behavior of subsurface reservoirs and play an important role in petroleum engineering. Data used in the development of a static geologic model are gathered from various sources, such as seismic, log, and core data, each of them providing information on different physical properties of interest and with varying degrees of resolution. Compiling all data from various sources into a single representation of the subsurface formation of interest is a daily challenge for many petroleum geologists and engineers. This paper describes a framework to develop and select process-mimicking models that are consistent with available seismic attributes, namely impedance. Using a process-mimicking modeling package, 75 models of a fluvial meandering system are generated, one of which is chosen as the “true” model and masked thereafter. The implemented selection method relies on the degree of similarity in the histogram of representations of clusters of all possible patterns in the seismic impedance domain based on each process-mimicking model and that of the “true” model at several resolutions. The results demonstrate the effectiveness of the use of a weighted average divergence distance across multiple levels to select process-mimicking models that honor seismic data the best.     

Geochemical,isotopic and hydrological mass balance approaches to constrain the lake water–groundwater interaction in Dal Lake,Kashmir Valley

It is important to have qualitative as well as quantitative understanding of the hydraulic exchange between lake and groundwater for effective water resource management. Dal, a famous urban fresh water lake, plays a fundamental role in social, cultural and economic dynamics of the Kashmir Valley. In this paper geochemical, isotopic and hydrological mass balance approaches are used to constrain the lake water–groundwater interaction of Dal Lake and to identify the sources of lake water. Water samples of precipitation (n = 27), lake water (n = 18) and groundwater (n = 32) were collected across the lake and its catchment for the analysis of δ¹⁸O and δ²H. A total of 444 lake water samples and 440 groundwater samples (springs, tube wells and dug wells) were collected for the analysis of Ca²⁺, Mg²⁺, HCO₃ ^?, SO₄ ^2?, Cl^?, NO₃ ^?, Na⁺ and K⁺. Water table and lake water level were monitored at 40 observation locations in the catchment. Water table map including pH and EC values corroborate and verify the gaining nature of the Dal Lake. Stable isotopes of lake water in Boddal and Gagribal basins showed more deviation from the global meteoric water line than Hazratbal and Nigeen basins, indicating the evaporation of lake water. The isotopic and geochemical mass balance suggested that groundwater contributes a significant proportion (23–40%) to Dal Lake. The estimated average groundwater contribution to Dal Lake ranged from 31.2 × 10³ to 674 × 10³ m³ day^?1 with an average of 276 × 10³ m³ day^?1. The study will be useful to delineate the possible sources of nutrients and pollutants entering the lake and for the management of lake water resources for sustainable development.