A new record and a new ichnospecies of Arachnostega from the Middle Miocene of Egypt

The ichnogenus Arachnostega Bertling, 1992 is recorded for the first time from a bioeroded, coral-rich, Middle Miocene limestone bed in the middle Siwa Escarpment Member (Marmarica Formation) at Siwa Oasis, northern Western Desert of Egypt. These burrowing traces are preserved on the surface of a few internal moulds of bivalves and gastropods. Until now, the ichnogenus Arachnostega included a single ichnospecies, A. gastrochaenae Bertling, 1992. In the material studied herein, two ichnospecies are identified, described, illustrated and compared with other, similar traces. One of these is a new ichnospecies of Arachnostega; this is here named A. siwaensis ichnosp. nov. It is distinguished from A. gastrochaenae in the possession of tunnels that usually branch in a V-pattern; intervals of ramification are longest in the main branch and decrease in second- and third-order branches. Arachnostega traces were produced in a warm, low-energy, shallow-marine (<10?m water depth) environment. Polychaetes are the most likely producers of marine Arachnostega, which are commonly occurred in the same studied bed. This new occurrence is significant in extending the known stratigraphical and geographical ranges of Arachnostega into the Middle Miocene of Egypt.     

Developing models and envelope curves for extreme floods in the Saudi Arabia arid environment

Forecasting and monitoring extreme floods in arid regions like Saudi Arabia (SA) are a big challenge for engineers and hydrologists. It is difficult to derive reliable flood estimates at any site without adequate flood measurements. Therefore, envelope curves were developed for reliable estimates of flood peaks. Relaying on recorded flood events in SA, Francou–Rodier approach is used to develop the Regional Maximum Flood (RMF) for some wadis and for SA as a whole. A total of 3121 flood events in 32 arid basins of sizes varying from 99 to more than 4500 km² are collected and analyzed. Results show that established regional coefficients (K) range between 2.76 and 5.5. The RMF formula for the Saudi regions is Q?=?251 A^0.45. The flood-frequency analysis showed that the Log-Pearson Type III is best. The extreme observed floods for the envelope curve for K?=?5.5 accommodate floods of recurrence interval ranging between 1000 and 100,000 years. The study results provide more realistic runoff peaks for a design of flood protection works for SA watersheds and for the similar environment. Consequently, it is recommended to use the developed envelope curves and models for efficient, safe and precise hydraulic structures design in SA.     

Coeval potassic and sodic calc-alkaline series in the post-collisional Hercynian Tanncherfi intrusive complex, northeastern Morocco: geochemical, isotopic and geochronological evidence

The post-collisional late Hercynian Tanncherfi intrusive complex (TIC) is part of a widespread intrusive episode in the Moroccan Meseta. The complex contains a wide range of rock types, from monzogabbros to monzogranites. Two distinct magmatic series are recognized: (1) a potassic (shoshonitic) series consisting of monzogabbros, quartz monzonites and monzogranites; and (2) a sodic (granodioritic) series represented by quartz monzodiorites and granodiorites. All the Tanncherfi plutonic rocks display similar spider-diagram profiles, with LILE and LREE enrichment and Nb, Ta, Ti depletion, which are typical of subduction-related magmas. Combined major, trace element compositions and Sr, Nd isotopic results indicate that the two series have been derived from a LILE- and LREE-enriched continental lithospheric mantle source, under different partial melting and/or depth conditions. Intrusion of the Tanncherfi rocks was not temporally related to subduction and the enrichment of their source is likely to be linked to preceding subduction events. The two series evolved by fractional crystallization, of clinopyroxene, plagioclase, hornblende, biotite, K-feldspar and accessories (Fe–Ti oxide minerals, titanite, apatite and zircon) for the potassic series while the sodic series combined fractional crystallization with assimilation of felsic magmas with lower Sr isotopic ratio than the more mafic term of the series, the quartz monzodiorite. The intrusion of the potassic magmas (344±6 Ma) marks a major change in the tectonic regime of eastern Meseta. These magmas intruded during post-thickening uplift and extension, both probably favored by convective thinning of the lithosphere. This model provides a reasonable mechanism for the genesis of other Hercynian intrusive complexes in Morocco.     

Biostratigraphy and seismic data analysis to detect the sequence stratigraphic depositional environment of the Miocene succession: Gulf of Suez (Egypt)

This work comprises a study of the sequence stratigraphy, seismic-facies analysis, biostratigraphy and depositional environments of the northern part of the Gulf of Suez, Egypt, using a set of 24 3D seismic profiles, composite logs and sonic logs from ten wells. The syn-rift formations in the studied ten wells are described lithologically and interpreted based on investigating two seismic profiles. Biostratigraphically, the Miocene fossils are identified to correlate the five planktonic foraminiferal biozones in the examined boreholes (RB-A1, RB-B1, RB-B3, EE85-2 and RB-C1). The sequence stratigraphic analysis suggests that the Miocene succession can be subdivided into two major third order depositional sequences (S1 and S2) separated by the three major sequence boundaries (DSB1, DSB2 and DSB3).     

The effectiveness of the very low frequency electromagnetic method (VLF-EM) in the exploration of sulphide mineralization in arid environments,case study from South Sinai Peninsula,Egypt

Very low frequency electromagnetic (VLF-EM) measurements were carried out in Wadi Isbayia area, south Sinai Peninsula, to test the efficiency of the VLF-EM method in the exploration of sulphide mineralization in arid environments. The VLF-EM field measurements, including tilt angle, real and imaginary components of the received VLF field, were carried out along fifteen profiles covering a quartz monzonite bedrock. Interpretation of the VLF measurements, in the light of geological information, has showed that sulphide minerals in the Wadi Isbayia area extend from the ground surface to a depth of about 200 m. However, the structural lineaments, especially faults, have controlled the distribution of the sulphide mineralization. A few of polished sections for rock samples, collected from the sites of the VLF-EM anomalies in the study area, have been prepared and examined by ore microscopy which confirmed the presence of pyrite and chalcopyrite as well as iron oxides, disseminated in the quartz monzonite bedrock. These results showed that the VLF-EM method is an effective tool in the exploration of sulphide minerals in the arid environments.     

Geodynamic Evolution of Northeastern Tunisia During the Maastrichtian–Paleocene Time: Insights from Integrated Seismic Stratigraphic Analysis

The Maastrichtian–Paleocene El Haria formation was studied and defined in Tunisia on the basis of outcrops and borehole data; few studies were interested in its three-dimensional extent. In this paper, the El Haria formation is reviewed in the context of a tectono-stratigraphic interval using an integrated seismic stratigraphic analysis based on borehole lithology logs, electrical well logging, well shots, vertical seismic profiles and post-stack surface data. Seismic analysis benefits from appropriate calibration with borehole data, conventional interpretation, velocity mapping, seismic attributes and post-stack model-based inversion. The applied methodology proved to be powerful for charactering the marly Maastrichtian–Paleocene interval of the El Haria formation. Migrated seismic sections together with borehole measurements are used to detail the three-dimensional changes in thickness, facies and depositional environment in the Cap Bon and Gulf of Hammamet regions during the Maastrichtian–Paleocene time. Furthermore, dating based on their microfossil content divulges local and multiple internal hiatuses within the El Haria formation which are related to the geodynamic evolution of the depositional floor since the Campanian stage. Interpreted seismic sections display concordance, unconformities, pinchouts, sedimentary gaps, incised valleys and syn-sedimentary normal faulting. Based on the seismic reflection geometry and terminations, seven sequences are delineated. These sequences are related to base-level changes as the combination of depositional floor paleo-topography, tectonic forces, subsidence and the developed accommodation space. These factors controlled the occurrence of the various parts of the Maastrichtian–Paleocene interval. Detailed examinations of these deposits together with the analysis of the structural deformation at different time periods allowed us to obtain a better understanding of the sediment architecture in depth and the delineation of the geodynamic evolution of the region.     

Update earthquake risk assessment in Cairo,Egypt

The Cairo earthquake (12 October 1992; m _b  = 5.8) is still and after 25 years one of the most painful events and is dug into the Egyptians memory. This is not due to the strength of the earthquake but due to the accompanied losses and damages (561 dead; 10,000 injured and 3000 families lost their homes). Nowadays, the most frequent and important question that should rise is “what if this earthquake is repeated today.” In this study, we simulate the same size earthquake (12 October 1992) ground motion shaking and the consequent social-economic impacts in terms of losses and damages. Seismic hazard, earthquake catalogs, soil types, demographics, and building inventories were integrated into HAZUS-MH to produce a sound earthquake risk assessment for Cairo including economic and social losses. Generally, the earthquake risk assessment clearly indicates that “the losses and damages may be increased twice or three times” in Cairo compared to the 1992 earthquake. The earthquake risk profile reveals that five districts (Al-Sahel, El Basateen, Dar El-Salam, Gharb, and Madinat Nasr sharq) lie in high seismic risks, and three districts (Manshiyat Naser, El-Waily, and Wassat (center)) are in low seismic risk level. Moreover, the building damage estimations reflect that Gharb is the highest vulnerable district. The analysis shows that the Cairo urban area faces high risk. Deteriorating buildings and infrastructure make the city particularly vulnerable to earthquake risks. For instance, more than 90 % of the estimated buildings damages are concentrated within the most densely populated (El Basateen, Dar El-Salam, Gharb, and Madinat Nasr Gharb) districts. Moreover, about 75 % of casualties are in the same districts. Actually, an earthquake risk assessment for Cairo represents a crucial application of the HAZUS earthquake loss estimation model for risk management. Finally, for mitigation, risk reduction, and to improve the seismic performance of structures and assure life safety and collapse prevention in future earthquakes, a five-step road map has been purposed.     

Numerical estimation of carbonate rock properties using multiscale images

Characterizing the pore space of rock samples using three‐dimensional (3D) X‐ray computed tomography images is a crucial step in digital rock physics. Indeed, the quality of the pore network extracted has a high impact on the prediction of rock properties such as porosity, permeability and elastic moduli. In carbonate rocks, it is usually very difficult to find a single image resolution which fully captures the sample pore network because of the heterogeneities existing at different scales. Hence, to overcome this limitation a multiscale analysis of the pore space may be needed. In this paper, we present a method to estimate porosity and elastic properties of clean carbonate (without clay content) samples from 3D X‐ray microtomography images at multiple resolutions. We perform a three‐phase segmentation to separate grains, pores and unresolved porous phase using 19 μm resolution images of each core plug. Then, we use images with higher resolution (between 0.3 and 2 μm) of microplugs extracted from the core plug samples. These subsets of images are assumed to be representative of the unresolved phase. We estimate the porosity and elastic properties of each sample by extrapolating the microplug properties to the whole unresolved phase. In addition, we compute the absolute permeability using the lattice Boltzmann method on the microplug images due to the low resolution of the core plug images. In order to validate the results of the numerical simulations, we compare our results with available laboratory measurements at the core plug scale. Porosity average simulations for the eight samples agree within 13%. Permeability numerical predictions provide realistic values in the range of experimental data but with a higher relative error. Finally, elastic moduli show the highest disagreements, with simulation error values exceeding 150% for three samples.     

Geochemistry of the High Dam Lake sediments,south Egypt： implications for environmental significance

The goal of the present work is to perform a geochemical assessment of High Dam Lake bottom sediments for determining the fate, dispersion and levels of trace elements causing environmental pollution, and provided an access to their probable sources. The sediment samples were analyzed using ICP-MS for 20 elements; Ag, Ba, Cr, Cu, Ga, Hf, Mn, Pb, Rb, Sc, Se, Sn, Sr, Ta Th Ti, T1, U, V and Zr, and their obtained data were treated using statistical, graphical and mapping techniques. The results showed the data set of all analyzed elements affected by outliers and extreme values that caused deviation away from normality. Kruskal-Wallis test revealed that median of some trace element levels in Lake sediments, was not significantly different and other elements rejected the Null hypothesis. Most analyzed elements had high values of median and mean in sediments of Lake Nubia rather than Lake Nasser and their normalization gave the same results of calculated environment factors. Subsequently, Lake Nubia sediments possessed high combined EF levels ofTh, Sc, Sn, Ag, Zr, Hf, Ta, Sr, U, Ti, V, Cr, and Mn, causing significant contamination, which was great potentially related to industrial, agricultural, urbanization and mining activities. Whereas, combined EF of Se, Cu, Ga, Pb, Ba, Rb, and Tl, which are highly elevated in southern Lake Nasser sediments owing to their source are great possibly derived from Lake Nubia and geogenic activities. With decreasing distance towards the High Dam body, the contaminant elements were diminished due to reduction in the environmental factors and Sudanese pollution sources leading to the northern Lake Nasser considered to be less contaminated. Overall, the present study is an environmental alert for contaminated sediments that carried contaminants and considered the secondary source of pollution impact on ecosystem, and subsequently, their environmental risk on Human health.