Studying the Evolution of Earthquake Network Measures for the Main Shock on June 24, 2015 in Egypt

Geotectonics - The monitoring of network measures, such as degree centrality, betweenness centrality, and clustering coefficient is performed, aiming to identify the periods that the earthquake...     

A novel technique in analyzing non-linear wave-wave interaction

During wave growth non-linear wave–wave interactions cause transfer of some wave energy from lower to higher wave periods as the spectrum grows. Wavelet bicoherence, which is a new technique in the analysis of wind–wave and wave–wave interactions, is used to analyze non-linear wave–wave interactions. A selected record of wind wave that contains the maximum wave height observed during 6 h of wave generation is divided into five segments and wavelet bicoherence is computed for the whole record, and for all divided segments. The study shows that the non-linear wave–wave interaction occurs at different bicoherence levels and these levels are different from one segment to another due to the non-stationarity feature of the examined data set.     

Characterizing hydrothermal alteration zones in Hamama area in the central Eastern Desert of Egypt by remotely sensed data

Abstract

Remote sensing techniques provide meaningful information to mineral exploration by identifying the hydrothermally altered minerals and the fracture/fault systems. In this article, Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data were processed to detect the hydrothermal alteration zones in Hamama area in the central part of the Eastern Desert of Egypt. Band ratios and principal component analyses successfully revealed the extent and the geometry of the hydrothermal alteration zones that trend in an NE–SW direction. Matching pixel spectrum derived from Minimum Noise Fraction, Pixel Purity Index, and n-dimensional visualization with reference spectra allowed characterizing key hydrothermal alteration minerals, including chlorite, kaolinite-smectite, muscovite, and haematite, in a successive alteration pattern. Field investigations and X-Ray Diffraction analysis validated the results revealed by ASTER data. In addition, the present prospects of significant gold and massive sulphide mineralizations are consistent with the detected hydrothermal alteration zone.     

Microchemical Characterization of Natural Gold and Copper Alloys from the Ancient Um Shashoba Gold Mine,South Egypt

The SEM-EDX technique was applied to investigate Au, and Cu＋Sn alloyed grains in the mineralization of the Um Shashoba mine for achieving further understanding of occurrences, internal structures and microchemistry of Au and Cu alloys and associated minerals, and mineralization type. This study is aiming at the genetic history of ore-bearing fluid events, geochemical evaluation and exploration significance. The results showed that the mineralization could be considered as a single major episode generated by metamorphic mesothermal solution rich in sulfides and unsaturated respect to Au. It was differentiated into many stages; started with formation of auriferous pyrite that was pseudomorphed by secondary hematite, limonite and goethite. Three phases of Au alloy were precipitated, and Cu＋Sn and Ag-rich alloys were produced respectively and followed by deposition of two generations of barren pyrite. Calcite and ankerite were crystalized, surrounded and partially replaced some of early formed minerals. Finally, barren muscovite recrystallized around and inside both later formed carbonate minerals that were free of any sign of Au in their structures. The processes of deformation, recrystallization, annealing, dissolution, remobilization and re-precipitation played the most important roles in the genetic history of the mineralization.     

Hydro-mechanical evaluation of stabilized mine tailings

. In this study, mine tailings waste was stabilized using a combination of lime, fly ash type "C", and aluminum. Treated samples were subjected to mineral identification for evaluating the formation of ettringite and gypsum. Also, unconfined compression, hydraulic conductivity, and cyclic freeze and thaw tests were performed to evaluate the hydro-mechanical properties of the stabilized samples. Experimental results have shown that the application of lime and fly ash type "C" to high sulfate content tailings has improved its plasticity, workability, and volume stability. Moreover, upon addition of aluminum to lime and fly ash in a sulfate-rich environment, ettringite and calcium sulfo-aluminate hydrate are formed in these samples. Application of 5% lime, 10% fly ash type "C", in combination with 110 ppm aluminum, resulted in the formation of a solid monolith capable of producing more than 1,000 kPa of unconfined compressive strength, and reduced tailings permeability to 1.96᎒^–6 cm s^–1, which is less than the recommended permeability of 10^–5 cm s^–1 by most environmental protection agencies for reusability of solidified/stabilized samples. The permeability of the treated tailings samples remained below the recommended permeability, even after exposing the treated samples to 12 freeze and thaw cycles. Therefore, based on the experimental results, it is concluded that treatment of high sulfate-content tailings with lime and fly ash, combined with the availability of aluminum for reactions, is a successful method of solidifying highly reactive mine tailings.     

Katol meteorite shower, Maharashtra: A preliminary study

A meteorite shower occurred in Katol (21° 15′ 30″ N; 78° 35′ 00″ E; at an elevation of 415 m above msl), Nagpur district of Maharashtra state, India on May 22, 2012 between 14:00 to 14:30 hrs (Indian Standard Time) with a presently observed strewn field of ～5.0 sq km area. The event was experienced by the hundreds of inhabitants with a loud noise and fire ball between Akola in the west to Nagpur in the east. The Geological Survey of India has so far collected 27 meteorite pieces with a total weight of 3500 gm. The locations, size, shape and surface features of the individual meteorite pieces have been recorded. Based on their physical properties, mineralogy, mineral chemical mapping and REE chemistry, the Katol meteorites have been classified as olivine-rich H5 type differentiated stony meteorite with reconstituted chondrules. The preliminary evidence suggests the presence of pre-solar grains in Katol meteorite.     

The use of three physico-chemical methods in the study of the organic matter associated with the sedimentary phosphorites in Djebel Onk Basin, Algeria

The study of the organic matter (OM) associated with the phosphate ore of Kef Essennoun deposit (Djebel Onk mining basin, Algeria) was with a view to determine the decomposition degree of the OM within the pellets and the matrix, and the conditions of diagenesis. The sedimentary phosphates of this deposit are constituted of sub-rounded, phosphate-rich grains (pellets) dispersed in a surrounding, much poorer than pellets in P, matrix (or gangue). The survey of the OM associated with both pellets and matrix used several types of analyses: scanning electron microscopy (SEM), scanning electron microscope with energy-dispersive X-ray analysis, Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. The results show the OM, dispersed approximately homogeneously, in the form of large flat particles, within the gangue and within the phosphatic pellets in the form of small particles. The O/C ratio showed that the OM is more oxidised in the matrix than within the pellets. The oxidation increased with the phosphatisation rate of the pellets and more with the carbonation rate of the matrix, but it decreased with the silicification degree in the siliceous carbonated matrix. Two major functional classes were distinguished within pellets: aliphatic and oxygenated ones, the latter being fundamentally present in humic OM. The presence and abundance of these humic compounds in pelletal phosphorites are known from the 1980s and considered as witnessing a formation of apatite in a strictly closed environment, inside the pellet.     

Assessment of soil erosion risk using SWAT model

Soil erosion is one of the most serious land degradation problems and the primary environmental issue in Mediterranean regions. Estimation of soil erosion loss in these regions is often difficult due to the complex interplay of many factors such as climate, land uses, topography, and human activities. The purpose of this study is to apply the Soil and Water Assessment Tool (SWAT) model to predict surface runoff generation patterns and soil erosion hazard and to prioritize most degraded sub-catchment in order to adopt the appropriate management intervention. The study area is the Sarrath river catchment (1,491 km²), north of Tunisia. Based on the estimated soil loss rates, the catchment was divided into four priority categories for conservation intervention. Results showed that a larger part of the watershed (90 %) fell under low and moderate soil erosion risk and only 10 % of the watershed was vulnerable to soil erosion with an estimated sediment loss exceeding 10 t?ha^?1?year^?1. Results indicated that spatial differences in erosion rates within the Sarrath catchment are mainly caused by differences in land cover type and gradient slope. Application of the SWAT model demonstrated that the model provides a useful tool to predict surface runoff and soil erosion hazard and can successfully be used for prioritization of vulnerable areas over semi-arid catchments.     

Adsorption of Congo red and crystal violet dyes onto cellulose extracted from Egyptian water hyacinth

Natural Hazards - The present investigation has highlighted the utility of floating aquatic Egyptian hyacinth, which is considered as a significant reason for environmental problems in Nile River,...     

也门共和国地质研究历史

从 18 5 2年Ｃａｒｔｅｒ首次沿阿拉伯海岸进行系统地质观察至今 ,也门有近 15 0年的地质研究历史。如果想容易地阅读和理解也门共和国地质研究史 ,必须对勘探工作、科学预测工作的历程进行重新研究 ,所有这些研究工作都与也门共和国地质研究史四个阶段的划分相一致。对于每一个回顾也门地质研究历史的人来说 ,都必须提及也门共和国地质研究史的四个阶段。第一阶段 (185 2～ 190 1)　 185 2年 ,Ｃａｒｔｅｒ首次沿阿拉伯海岸从Ｍｕｓｃａｔ到Ｏｍａｎ进行了系统地质观察 ,此后 ,其他作者也进行了地质研究。如Ｂｕｒｒ于 186 4年编写了Ａｄｅ…