Vulnerability Assessment and Earthquake Risk Mapping in Part of North Iran Using Geospatial Techniques

Earthquakes cause huge loss of lives and infrastructure every year in Iran. Many settlement areas (urban & rural) as well as Tehran, the capital city of Iran are located in the hazardous area. This research deals with the earthquake risk assessment and mapping based on recent remote sensing information on a GIS platform. The study area is part of Central Alborz in southern Caspian Sea and north of capital city of Tehran called Marzanabad area. It is a potentially high-risk zone as several earthquakes have occurred in the past. The study’s main objective is to develop an Earthquake Risk Map at the scale of 1:25,000 to identify high-risk zone and vulnerability areas to the settlements and infrastructure of area. Digital lineaments wear extraction and analysis for identification the faults using several RADAR and optical images with spatial analysis techniques. The probable faults were detected by superimposition of the lithological and geomorphologic features and their variance over the lineaments in a GIS environment. This research work involved fault identification on the remote sensed dataset as well as field studies and the risky areas were classified in the vicinity of the faults by applying different buffer with specifying distance of the source/site of risk to fault location. Statistical analysis of Earthquake Risk Map (ERM) by GIS indicated that 32% of the total area with about 66% of settlements and 52% of population is located in strongly high-risk and high-risk zone. Moderately low risk and low risk zones cover 38.67% of total area, which is free of settlements as well as population. The Earthquake map elaborated in this research work will be a useful tool for disaster management as well as urban and regional planning of future activities in the area.     

An Introduction to MODISI and SCMOD Methods for Correction of the MODIS Snow Assessment Algorithm

Detection, monitoring and precise assessment of the snow covered regions is an important issue. Snow cover area and consequently the amount of runoff generated from snowmelt have a significant effect on water supply management. To precisely detect and monitor the snow covered area we need satellite images with suitable spatial and temporal resolutions where we usually lose one for the other. In this study, products of two sensors MODIS and ASTER both on board of TERRA platform having low and high spatial resolution respectively were used. The objective of the study was to modify the snow products of MODIS by using simultaneous images of ASTER. For this, MODIS snow index image with high temporal resolution were compared with that of ASTER, using regression and correlation analysis. To improve NDSI index two methods were developed. The first method generated from direct comparison of ASTER averaged NDSI with those of MODIS (MODISI). The second method generated by dividing MODIS NDSI index into 10 codes according to their percentage of surface cover and then compared the results with the difference between ASTER averaged and MODIS snow indices (SCMOD). Both methods were tested against some 16 MODIS pixels. It is found that the precision of the MODISI method was more than 96%. This for SCMOD was about 98%. The RMSE of both methods were as good as 0.02.     

Regaining momentum for international climate policy beyond Copenhagen

The 'Copenhagen Accord' fails to deliver the political framework for a fair, ambitious and legally-binding international climate agreement beyond 2012. The current climate policy regime dynamics are insufficient to reflect the realities of topical complexity, actor coalitions, as well as financial, legal and institutional challenges in the light of extreme time constraints to avoid 'dangerous' climate change of more than 2°C. In this paper we analyze these stumbling blocks for international climate policy and discuss alternatives in order to regain momentum for future negotiations.     

Accuracy improvement of ASTER stereo satellite generated DEM using texture filter

The grid DEM(digital elevation model) generation can be from any of a number of sources:for instance,analogue to digital conversion of contour maps followed by application of the TIN model,or direct elevation point modelling via digital photogrammetry applied to airborne images or satellite images.Currently,apart from the deployment of point-clouds from LiDAR data acquisition,the generally favoured approach refers to applications of digital photogrammetry.One of the most important steps in such deployment i...     

Geo-scape,a granularity depended spatialization tool for visualizing multidimensional data sets

Recently,the expertise accumulated in the field of geovisualization has found application in the visualization of abstract multidimensional data,on the basis of methods called spatialization methods.Spatialization methods aim at visualizing multidimensional data into low-dimensional representational spaces by making use of spatial metaphors and applying dimension reduction techniques.Spatial metaphors are able to provide a metaphoric framework for the visualization of information at different levels of gran...     

山东沂沭河流域2000BC前后古文化兴衰的环境考古

Neolithic culture series in the Yishu River Basin developed in the order of Beixin culture-Dawenkou culture-Longshan culture-Yueshi culture. During the early and middle stage of Longshan culture （4600-4300 cal. yr BP）, the climate in the Yishu River Basin was warm and wet. Paddy-oriented agriculture planted paddy was very developed. The society was flourishing with great amount of archaeological sites. The cooling starting in 4200 cal. yr BP made the paddies shortfall in output or even no seeds were gathered. This situation intensified the discrepancy between population and resource. The scarcity in natural resource led to substantial decrease in population and subsequent drop in archaeological sites. About 4000 cal. yr BP Longshan culture was displaced by Yueshi culture which was relatively un- derdeveloped, simple and unsophisticated.     

Inversion of Vegetation Components Based on the Spectral Mixture Analysis Using Hyperion Data

Hyper spectral remote sensing is widely used to identify ground objects as a result of the advantages of ground radiation intensity characteristics and spectral position characteristics, in which inversion of vegetation components is the difficult point and hotspot. In this study, Huma county of Heilongjiang Province was selected as the study area, the canopy spectra of four types of typical vegetation were measured in situ firstly, including mongolian oak, cotton grass, lespedeza and white birch. Then, on the basis of analyzing the canopy spectral characteristics and their parameterization, the spectral differences of different vegetations were located, and the parameterization method of characteristics identification was determined. Finally, Hyperion data were used to calculate the canopy albedos based on the bidirectional reflectance model of vegetation canopies, and to map the vegetation components in the study area by use of linear spectral mixture model. The results showed that inversion of vegetation components in high vegetation-covered area was accurate using the canopy albedos and liner spectral mixture model, and was identical with the field sampling, which validated the feasibility of canopy albedos and liner spectral mixture model for the inversion of vegetation components.     

Extraction of Alteration Mineral Information from Moderate Remote Sensing Images Using MPS Method

Although alteration minerals related to metallogenesis is very important in mineral exploration, information of alteration mineral is weakly expressed in remote sensing imagery, which is often subject to interfering noise and sometimes limited in spectral and spatial resolutions. Because of easy access, moderate images are the main sources of alteration mineral information. Therefore, it is very important to develop alteration mineral information extraction methods from remote sensing images. In this paper, a combined method based on Mask, principal component analysis (PCA) and support vector machine method (SVM) was used to extract alteration mineral information from Enhanced thematic mapper plus remote sensing data with limited spectral and spatial resolutions. First, a mask image of the remote sensing imagery was created to remove interference information such as vegetation, shadow and water. Then, PCA was employed to collect sample data relating to iron, argillic, and carbonatization alteration. Finally, SVM was used to deal with alteration anomaly and build a feature extraction model of high accuracy. The Mask-PCA-SVM model is used to extract alteration mineral information from remote sensing images of Hatu area, Xinjiang Uygur Autonomous Regions, China. The results show that the new methods proposed in this paper can coincide well with known deposits occurrences, rate reached 86.51%. While, the consistent rate with known deposits of the ratio model, PCA model and Spectral angle mapper model were only 3.37, 65.08 and 69.05% respectively. This suggests that the proposed model can find the actual distribution of mineral deposits more effectively by reducing interference to a greater degree.     

A Stochastic Approach to Estimate Distribution of Built-Up Area in Regions with Thick Tree Cover

Buildings and other human-made constructions have been accepted as an indicator of human habitation and are identified as built-up area. Identification of built-up area in a region and its subsequent measurement is a key step in many fields of studies like urban planning, environmental studies, and population demography. Remote sensing techniques utilising medium resolution images (e.g. LISS III, Landsat) are extensively used for the extraction of the built-up area as high-resolution images are expensive, and its processing is difficult. Extraction of built land use from medium resolution images poses a challenge in regions like Western-Ghats, North-East regions of India, and countries in tropical region, due to the thick evergreen tree cover. The spectral signature of individual houses with a small footprint are easily overpowered by the overlapping tree canopy in a medium resolution image when the buildings are not clustered. Kerala is a typical case for this scenario. The research presented here proposes a stochastic-dasymetric process to aid in the built-up area recognition process by taking Kerala as a case study. The method utilises a set of ancillary information to derive a probability surface. The ancillary information used here includes distance from road junctions, distance from road network, population density, built-up space visible in the LISS III image, the population of the region, and the household size. The methodology employs logistic regression and Monte Carlo simulation in two sub processes. The algorithm estimates the built-up area expected in the region and distributes the estimated built-up area among pixels according to the probability estimated from the ancillary information. The output of the algorithm has two components. The first component is an example scenario of the built-up area distribution. The second component is a probability surface, where the value of each pixel denotes the probability of that pixel to have a significant built-up area within it. The algorithm is validated for regions in Kerala and found to be significant. The model correctly predicted the built-up pixel count count over a validation grid of 900 m in 95.2% of the cases. The algorithm is implemented using Python and ArcGIS.