Physical parameters identification for full-scale ten-story reinforced concrete building with degrading tri-linear model by modal iterative error correction method

To assess the post-earthquake seismic safety of buildings, it is crucial to predict seismic response, and it is necessary to set the appropriate physical parameters of the response analysis model. Numerous methods have been proposed to identify physical parameters. However, most of them are limited to linear systems, and previous researches on nonlinear systems have difficulties in practical applications. In this paper, a nonlinear response analysis model is identified for a full-scale ten-story reinforced concrete building with the degrading tri-linear stiffness model by the modal iterative error correction (MIEC) method, and the accuracy of this technique is discussed by comparing with the shaking table test.     

Pristine stratospheric collection of interplanetary dust on an oil‐free polyurethane foam substrate

We performed chemical, mineralogical, and isotopic studies of the first interplanetary dust particles (IDPs) collected in the stratosphere without the use of silicone oil. The collection substrate, polyurethane foam, effectively traps impacting particles, but the lack of an embedding medium results in significant particle fragmentation. Two dust particles found on the collector exhibit the typical compositional and mineralogical properties of chondritic porous interplanetary dust particles (CP‐IDPs). Hydrogen and nitrogen isotopic imaging revealed isotopic anomalies of typical magnitude and spatial variability observed in previous CP‐IDP studies. Oxygen isotopic imaging shows that individual mineral grains and glass with embedded metal and sulfide (GEMS) grains are dominated by solar system materials. No systematic differences are observed in element abundance patterns of GEMS grains from the dry collection versus silicone oil‐collected IDPs. This initial study establishes the validity of a new IDP collection substrate that avoids the use of silicone oil as a collection medium, removing the need for this problematic contaminant and the organic solvents necessary to remove it. Additional silicone oil‐free collections of this type are needed to determine more accurate bulk element abundances of IDPs and to examine the indigenous soluble organic components of IDPs.     

An anomalous eucrite,Dhofar 007, and a possible genetic relationship with mesosiderites

Abstract— We studied the texture, mineralogy, and bulk chemical composition of Dhofar 007, a basaltic achondrite. Dhofar 007 is a polymict breccia that is mostly composed of coarse‐grained granular (CG) clasts with a minor amount of xenolithic components, such as a fragment of Mg‐rich pyroxene. The coarse‐grained, relict gabbroic texture, mineral chemistry, and bulk chemical data of the coarse‐grained clast indicate that the CG clasts were originally a cumulate rock crystallized in a crust of the parent body. However, in contrast to monomict eucrites, the siderophile elements are highly enriched and could have been introduced by impact events. Dhofar 007 appears to have experienced a two‐stage postcrystallization thermal history: rapid cooling at high temperatures and slow cooling at lower temperatures. The presence of pigeonite with closely spaced, fine augite lamellae suggests that this rock was cooled rapidly from higher temperatures (>0.5 °C/yr at ˜1000 °C) than typical cumulate eucrites. However, the presence of the cloudy zone in taenite and the Ni profile across the kamacite‐taenite boundaries indicates that the cooling rate was very slow at lower temperatures (˜1–10 °C/Myr at <600–700 °C). The slow cooling rate is comparable to those in mesosiderites and pallasites. The two‐stage thermal history and the relative abundance of siderophile elements similar to those for metallic portions in mesosiderites suggest that Dhofar 007 is a large inclusion of mesosiderite. However, we cannot rule out a possibility that Dhofar 007 is an anomalous eucrite.     

Effects of experimental aqueous alteration on the abundances of argon‐rich noble gases in the Ningqiang carbonaceous chondrite

Abstract— Ar‐rich noble gases, the so‐called “subsolar” noble gases, are a major component of heavy primordial noble gases in unequilibrated ordinary chondrites and some classes of anhydrous carbonaceous chondrites, whereas they are almost absent in hydrous carbonaceous chondrites that suffered extensive aqueous alteration. To understand the effects of aqueous alteration on the abundance of Ar‐rich noble gases, we performed an aqueous alteration experiments on the Ningqiang type 3 carbonaceous chondrite that consists entirely of anhydrous minerals and contains Ar‐rich noble gases. Powdered samples and deionized neutral water were kept at 200 °C for 10 and 20 days, respectively. Mineralogical analyses show that, during the 10‐day alteration, serpentine and hematite formed at the expense of olivine, low‐Ca pyroxene, and sulfide. Noble gas analyses show that the 10‐day alteration of natural Ningqiang removed 79% of the primordial ³⁶Ar, 68% of the ⁸⁴Kr, and 60% of the ¹³²Xe, but only 45% of the ⁴He and 53% of the primordial ²⁰Ne. Calculated elemental ratios of the noble gases removed during the 10‐day alteration are in the range of those of Ar‐rich noble gases. These results indicate that Ar‐rich noble gases are located in materials that are very susceptible to aqueous alteration. In contrast, heavy primordial noble gases remaining in the altered samples are close to Q gas in elemental and isotope compositions. This indicates that phase Q is much more resistant to aqueous alteration than the host phases of Ar‐rich noble gases. In the 20‐day sample, the mineralogical and noble gas signatures are basically similar to those of the 10‐day sample, indicating that the loss of Ar‐rich noble gases was completed within the 10‐day alteration. Our results suggest that almost all of the Ar‐rich noble gases were lost from primitive asteroids during early, low‐temperature aqueous alteration.     

Seismic scattering and shallow structure of the moon in oceanus procellarum

Long, reverberating trains of seismic waves produced by impacts and moonquakes may be interpreted in terms of scattering in a surface layer overlying a non-scattering elastic medium. Model seismic experiments are used to qualitatively demonstrate the correctness of the interpretation. Three types of seismograms are found, near impact, far impact and moonquake. Only near impact and moonquake seismograms contain independent information. Details are given in the paper of the modelling of the scattering processes by the theory of diffusion.Interpretation of moonquake and artificial impact seismograms in two frequency bands from the Apollo 12 site indicates that the scattering layer is 25 km thick, with a Q of 5000. The mean distance between scatterers is approximately 5 km at 25 km depth and approximately 2 km at 14 km depth; the density of scatterers appears to be high near the surface, decreasing with depth. This may indicate that the scatterers are associated with cratering, or are cracks that anneal with depth. Most of the scattered energy is in the form of scattered surface waves.Communication presented at the Lunar Science Institute Conference on Geophysical and Geochemical Exploration of the Moon and Planets, January 10–12, 1973.     

Case a evolution of massive close binary systems

We present in this paper the evolutionary characteristics of the systems belonging to two evolution types, designated as 1C2COf and 1Nc2COf, among seven evolution types which were studied in the preceding paper of this series. These two types are most complicated and interesting in the evolutionary behaviour, which consists of repeated detached, semi-detached, and contact phases. We discuss observational aspects of the results. Evolutionary behaviour of the systems are also discussed, compared with the thermal relaxation oscillation model.     

A Tsunami Generated by a Possible Submarine Slide: Evidence for Slope Failure Triggered by the North Anatolian Fault Movement

A tsunamigenic sediment layer has been discovered in fluvio-alluvial sequences on the northern coast of the Marmara Sea, northwestern Turkey. The layer consists of unsorted silty coarse sand including terrestrial molluscs and charcoal fragments. The AMS radiometric ages of the shells have been estimated at around BC 400, AD 300, AD 400, and AD 1000. We propose that a tsunami occurred in the Marmara Sea in the middle of 11th century and invaded the fluvial plains. The older fossils were derived from the underlying horizons, and it is probable that buoyant materials such as terrestrial molluscs and charcoals were isolated from liquefied sediments during submarine sliding. Slope failure of coastal blocks triggered by fault movement generated tsunamis, which might have transported floating materials to the backshore.     

Moonquakes and lunar tectonism

With the succesful installation of a geophysical station at Hadley Rille, on July 31, 1971, on the Apollo 15 mission, and the continued operation of stations 12 and 14 approximately 1100 km SW, the Apollo program for the first time achieved a network of seismic stations on the lunar surface. A network of at least three stations is essential for the location of natural events on the Moon. Thus, the establishment of this network was one of the most important milestones in the geophysical exploration of the Moon. The major discoveries that have resulted to date from the analysis of seismic data from this network can be summarized as follows:

1. Lunar seismic signals differ greatly from typical terrestrial seismic signals. It now appears that this can be explained almost entirely by the presence of a thin dry, heterogeneous layer which blankets the Moon to a probable depth of few km with a maximum possible depth of about 20 km. Seismic waves are highly scattered in this zone. Seismic wave propagation within the lunar interior, below the scattering zone, is highly efficient. As a result, it is probable that meteoroid impact signals are being received from the entire lunar surface.
2. The Moon possesses a crust and a mantle, at least in the region of the Apollo 12 and 14 stations. The thickness of the crust is between 55 and 70 km and may consist of two layers. The contrast in elastic properties of the rocks which comprise these major structural units is at least as great as that which exists between the crust and mantle of the earth. (See Toks?zet al., p. 490, for further discussion of seismic evidence of a lunar crust.)
3. Natural lunar events detected by the Apollo seismic network are moonquakes and meteoroid impacts. The average rate of release of seismic energy from moonquakes is far below that of the Earth. Although present data do not permit a completely unambiguous interpretation, the best solution obtainable places the most active moonquake focus at a depth of 800 km; slightly deeper than any known earthquake. These moonquakes occur in monthly cycles; triggered by lunar tides. There are at least 10 zones within which the repeating moonquakes originate.
4. In addition to the repeating moonquakes, moonquake ‘swarms’ have been discovered. During periods of swarm activity, events may occur as frequently as one event every two hours over intervals lasting several days. The source of these swarms is unknown at present. The occurrence of moonquake swarms also appears to be related to lunar tides; although, it is too soon to be certain of this point.

These findings have been discussed in eight previous papers (Lathamet al., 1969, 1970, 1971) The instrument has been described by Lathamet al. (1969) and Sutton and Latham (1964). The locations of the seismic stations are shown in Figure 1.     

Concentration and subcellular distribution of trace elements in liver of small cetaceans incidentally caught along the Brazilian coast

Concentrations of trace elements (V, Cr, Mn, Fe, Co, Cu, Zn, Ga, As, Se, Rb, Sr, Mo, Ag, Cd, Sb, Cs, Ba, T-Hg, Org-Hg, Tl and Pb) were determined in liver samples of estuarine dolphin (Sotalia guianensis; n = 20), Franciscana dolphin (Pontoporia blainvillei; n = 23), Atlantic spotted dolphin (Stenella frontalis; n = 2), common dolphin (Delphinus capensis; n = 1) and striped dolphin (Stenella coeruleoalba; n = 1) incidentally caught along the coast of Sao Paulo State and Parana State, Brazil, from 1997 to 1999. The hepatic concentrations of trace elements in the Brazilian cetaceans were comparable to the data available in literature on marine mammals from Northern Hemisphere. Concentrations of V, Se, Mo, Cd, T-Hg and Org-Hg increased with increasing age in liver of both estuarine and Franciscana dolphins. Very high concentrations of Cu (range, 262-1970 microg/g dry wt.) and Zn (range, 242-369 microg/g dry wt.) were observed in liver of sucklings of estuarine dolphin. Hepatic concentrations of V, Se, T-Hg, Org-Hg and Pb were significantly higher in estuarine dolphin, whereas Franciscana dolphin showed higher concentrations of Mn, Co, As and Rb. Ratio of Org-Hg to T-Hg in liver was significantly higher in Franciscana dolphin than estuarine dolphin, suggesting that demethylation ability of methyl Hg might be lower in liver of Franciscana than estuarine dolphins. High hepatic concentrations of Ag were found in some specimens of Franciscana dolphin (maximum, 20 microg/g dry wt.), and 17% of Franciscana showed higher concentrations of Ag than Hg. These samples with high Ag concentration also exhibited elevated hepatic Se concentration, implying that Ag might be detoxified by Se in the liver. Higher correlation coefficient between (Hg+0.5 Ag) and Se than between Hg and Se and the large distribution of Ag in non-soluble fraction in nuclear and mitochondrial fraction of the liver also suggests that Ag might be detoxified by Se via formation of Ag2Se in the liver of Franciscana dolphin.