Role of bedrock groundwater in the rainfall–runoff process in a small headwater catchment underlain by volcanic rock

The role of bedrock groundwater in rainfall–runoff processes is poorly understood. Hydrometric, tracer and subsurface water potential observations were conducted to study the role of bedrock groundwater and subsurface flow in the rainfall–runoff process in a small headwater catchment in Shiranui, Kumamoto prefecture, south‐west Japan. The catchment bedrock consists of a strongly weathered, fractured andesite layer and a relatively fresh continuous layer. Major chemical constituents and stable isotopic ratios of δ¹⁸O and δD were analysed for spring water, rainwater, soil water and bedrock groundwater. Temporal and spatial variation in SiO₂ showed that stream flow under the base flow condition was maintained by bedrock groundwater. Time series of three components of the rainstorm hydrograph (rainwater, soil water and bedrock groundwater) separated by end member mixing analysis showed that each component fluctuated during rainstorm, and their patterns and magnitudes differed between events. During a typical mid‐magnitude storm event, a delayed secondary runoff peak with 1·0 l s⁻¹ was caused by increase in the bedrock groundwater component, whereas during a large rainstorm event the bedrock groundwater component increased to ≈ 2·5 l s⁻¹. This research shows that the contribution of bedrock groundwater and soil water depends strongly on the location of the groundwater table, i.e. whether or not it rises above the soil–bedrock interface. Copyright © 2010 John Wiley & Sons, Ltd.     

Numerical Simulation of Crown Pillar Behaviour in Transition from Open Pit to Underground Mining

Geotechnical and Geological Engineering - Crown pillars provide regional and local support by isolating the ground surface from underground mine workings. Topography above the underground mine may...     

Teleconnection and climatic oscillation in aquifer water level in Kumamoto plain,Japan

Relative little is known about the interaction between climate change and groundwater. Analysis of aquifer response to climatic variability could improve the knowledge related to groundwater resource variations and therefore provides guidance on water resource management. In this work, seasonal and annual variations of groundwater levels in Kumamoto plain (Japan) and their possible interactions with climatic indices and El Niño Southern Oscillation (ENSO) were analyzed statistically. Results show the following: (1) The water level in the recharge area mainly fluctuates at 1‐ and 2‐year periods, whereas the significant periodicity for water level oscillation in the coastal aquifer is 0.5 year. (2) The aquifer water levels are possibly influenced by variability in precipitation, air temperature, barometric pressure, humidity variances and ENSO. Relative high correlations and large proportions of similarities in wavelet power patterns were found between these variables and water levels. (3) Aquifer response to climatic variances was evaluated using cross wavelet transform and wavelet coherence. In recharging aquifers, the ENSO‐induced annual variations in precipitation, air temperature, humidity and barometric pressure affect aquifer water levels. The precipitation, air temperature and humidity respond to ENSO with a 4‐, 6‐ and 8‐month time lag, respectively, whereas the ENSO imparts weak influence on the barometric pressure. Significant biennial variation of water levels during 1991–1995 is caused primarily by precipitation and humidity variations. In the coastal aquifer, the 0.5‐year variability in ENSO is transferred by precipitation, barometric pressure and humidity to aquifer water levels, and the precipitation/humidity influence is more significant comparing with the barometric pressure. Copyright © 2014 John Wiley & Sons, Ltd.     

Study on the physical disintegration characteristics of Subang claystone subjected to a modified slaking index test

Some instability problems were found on natural or engineered slopes mostly lying on Subang claystones. The instability problems included excessive erosion, slumps and rock falls. The field performance surveys of the problems suggested that the claystones physically weather rapidly so that the rock properties they exhibit during excavation often change to properties with a more characteristic of soil. Such a phenomenon is generally known as a slaking process. In order to gain better understanding about the slaking of Subang claystones, a series of experimental laboratory studies were carried out involving a modified slaking index test. Claystone samples used in this study were obtained from their exposures along the Northern West Java area of Indonesia. Petrographic analysis was correspondingly performed to identify mineral and texture/fabric, and in turn, to determine the inherent factors of the rocks which might affect the slaking process. The stssudy results indicated that the claystones were characterized by high to very high slaking properties having a maximum slaking index (I_s) of 57.4% and a mean I_s of 43.8%. Major dispersion slaking on sample surfaces and high cracking in response to excessive swelling were recognized as main slaking modes within the claystones. All samples lose progressively less material through the five wet–dry cycles of a slaking index test, indicating a decelerated slaking rate. It was evident that the main inherent factors controlling the slaking process were expandable clay mineral smectite, non-clay mineral pyrite and soluble mineral calcite. Moreover, a quite important of inherent bonding material and stress release energy in the slaking characteristics of the claystones was revealed by a closure phase of an initial hairline crack during unloading.     

An X-ray diffraction study of shock-wave-densified SiO<Subscript>2</Subscript> glasses

 The densification and structural changes in SiO₂ glass compressed up to 43.4 GPa by shock experiments are investigated quantitatively by the X-ray diffraction technique. Direct structural data (average Si–O and Si–Si distances and Si–O–Si angles, coordination number of the Si atom) of these shock-densified SiO₂ glasses have been obtained by analyzing the radial distribution function curves, RDF(r), calculated with X-ray diffraction data. The coordination number of all densified glasses is about 4 and shows almost no pressure variation. The SiO₂ glass has shown density increase of 11% at a shock compression of 26.3 GPa. This density evolution could not be explained by the coordination change. The reduction of the average Si–O–Si angle (144° at 0 GPa to 136° at 26.3 GPa) obtained from RDF(r) data may account for this density increase. This Si–O–Si angle change may be caused by shrinkage of the network structure and the increase of small rings of SiO₄ tetrahedra. For higher shock pressure, a decrease in the Si–O–Si angle to 140° was observed. This is consistent with the decrease in density at 32.0 and 43.2 GPa. This decrease in the Si–O–Si angle and density could be attributed to an annealing effect due to high after-shock residual temperature. This pressure dependence of average Si–O–Si angles in shock-densified SiO₂ glass agrees with the results of our previous Raman spectroscopic study. On the other hand, the pressure variation for the first sharp diffraction peak (FSDP) was analyzed to estimate the evolution of intermediate range structures. It is suggested that the mean d value (d _m ) obtained from the position of FSDP strongly depends on the shock and residual temperature, as well as shock pressure. Received: 29 June 2001 / Accepted: 14 November 2001     

Development of an apparatus to measure groundwater qualities in situ and to sample groundwater using boreholes

 To accurately measure the pH, Eh, EC and temperature of groundwater retrieved from boreholes, a deep groundwater sampling apparatus was developed which provided sensory measurements both in situ and in a flow-through cell at ground level. Under a pressure of 1×10⁶ Pa the in situ accuracy of the apparatus sensor was within the following limits: pH ±0.2, temperature ±0.1°C, Eh ±10 mV, and EC ±2.4%. The measuring and sampling of deep groundwater from a borehole of more than 1000 m in depth was performed continuously for 30 days. Values of pH were the same for the in situ sensor, the flow-through cell sensor and the laboratory measurements of the sampled water. At the beginning of the sampling period, Eh values of the in situ sensor indicated deep groundwater conditions. The apparatus is particularly useful for Eh measurement. Chemical composition and stable isotope ratios indicated that the groundwater sampled from more than 1000 m depth was a connate water with a chemical composition slightly different from seawater of the present time, and the groundwater retrieved from 800 m depth was a meteoric water. Natural radioactive elements are thought to be the origin of the tritium in the groundwater retrieved from the 1000 m depth. Received: 6 August 1996 / Accepted: 22 October 1996     

Rapid and Simple Measurement of H2 Emission from Active Faults Using Compact Sampling Equipments

Smaller equipment has been developed for sampling and measuring H₂ in fault zones. A considerable volume of hydrogen emission, suggesting the presence of fluid paths along fault zones, was detected within a 1‐h simple field procedure at an active fault in Central Japan, the Atotsugawa Fault. The equipment enabled measurements in a thin fault gouge with a thickness of 10 mm; this led to pervasive sampling from small fault zones hosted in harder rocks. A rapid evaluation of the spatio‐temporal heterogeneity of hydrogen emissions along the faults, using the present method, would increase knowledge of fluid circulation around faults.     

Unusual Behavior of the Kuroshio Current System from Winter 1996 to Summer 1997 Revealed by ADEOS-OCTS and Other Data (Continued): A Study from Broad External Conditions with Bottom Topography

In the previous paper (Toba and Murakami, 1998) we reported on an unusual path of the Kuroshio Current System, which occurred in April 1997 (April 1997 event), using the Ocean Color and Temperature Scanner (OCTS) data of the Advanced Earth Observing Satellite (ADEOS). The April 1997 event was characterized by the flow of the Kuroshio along the western slope (northward) and the eastern slope (southward) of the Izu-Ogasawara Ridge, a very southerly turning point at about 32°N, followed by a straight northward path up to 37°N of the Kuroshio Extension along the eastern flank of the Izu-Ogasawara and the Japan Trenches. Overlaying of depth contours on ADEOS-OCTS chlorophyll-a images at the April 1997 event demonstrates the bottom topography effects on the current paths. A new finding based on TOPEX/Poseidon altimeter data is that the sea-surface gradient across the Kuroshio/Kuroshio Extension diminished greatly in the sea area southeast of the central Japan, as a very temporary phenomenon prior to this event. This temporary diminishing of the upper-ocean current velocity might have caused a stronger bottom effect along the Izu-Ogasawara Ridge, and over the Izu-Ogasawara Trench disclosed a weak background, barotropic trench-flank current pattern, which existed otherwise independently of the Kuroshio Extension. The very southerly path of the Kuroshio Extension from winter 1996 to autumn 1998 corresponded, with a time lag of about 1.5 years, to the previous La Niña tendency with weaker North Equatorial Current. The April 1997 event occurred in accordance with its extreme condition.     

Fluid inclusion studies of the polymetallic hydrothermal ore deposits in bolivia

Homogenization temperature and salinity were determined for fluid inclusions in mostly quartz and partly sphalerite, cassiterite, and barite from the 28 tin-polymetallic ore deposits in Bolivia. Generally, the homogenization temperatures and salinities of these fluid inclusions are comparatively high for ore deposits formed by cassiterite mineralization, such as Morococala and Avicaya in the Oruro district, frequently indicating a temperature higher than 300°C and salinity higher than 20 equiv. wt% NaCl. Particularly, it is quite possible that tin deposits associated with the W-Bi and tourmaline mineralizations such as Viloco and Caracoles have been produced by such high-temperature hypersaline fluid ranging up to 500°C and 56 equiv. wt% NaCl, similar to the porphyry copper type. This feature reveals that the hydrothermal fluid related to the Sn-W-Bi mineralization may be of magmatic origin. Homogenization temperatures for the Pb-Zn deposits with no tin minerals are low, mostly ranging 170°–300°C. At the Avicaya-Bolivar mining area in the Oruro district as well as at the Tasna and Chocaya-Animas mining areas in the Quechisla district temperature gradients consistent with the zonal distributions of ore minerals were confirmed.