Assessment of village-wise groundwater draft for irrigation: a field-based study in hard-rock aquifers of central India

Extracted groundwater, 90% of which is used for irrigated agriculture, is central to the socio-economic development of India. A lack of regulation or implementation of regulations, alongside unrecorded extraction, often leads to over exploitation of large-scale common-pool resources like groundwater. Inevitably, management of groundwater extraction (draft) for irrigation is critical for sustainability of aquifers and the society at large. However, existing assessments of groundwater draft, which are mostly available at large spatial scales, are inadequate for managing groundwater resources that are primarily exploited by stakeholders at much finer scales. This study presents an estimate, projection and analysis of fine-scale groundwater draft in the Seonath-Kharun interfluve of central India. Using field surveys of instantaneous discharge from irrigation wells and boreholes, annual groundwater draft for irrigation in this area is estimated to be 212 × 10⁶ m³, most of which (89%) is withdrawn during non-monsoon season. However, the density of wells/boreholes, and consequent extraction of groundwater, is controlled by the existing hydrogeological conditions. Based on trends in the number of abstraction structures (1982–2011), groundwater draft for the year 2020 is projected to be approximately 307 × 10⁶ m³; hence, groundwater draft for irrigation in the study area is predicted to increase by ～44% within a span of 8 years. Central to the work presented here is the approach for estimation and prediction of groundwater draft at finer scales, which can be extended to critical groundwater zones of the country.     

Application of the QUILF thermobarometer to the peralkaline trachytes and pantellerites of the Eburru volcanic complex, East African Rift, Kenya

The Quaternary Eburru volcanic complex in the south-central Kenya Rift consists of pantelleritic trachytes and pantellerites. The phenocryst assemblage in the trachytes is sanidine + fayalite + ferrohedenbergite + aenigmatite ± quartz ± ilmenite ± magnetite ± pyrrhotite ± pyrite. In the pantellerites, the assemblage is sanidine + quartz + ferrohedenbergite + fayalite + aenigmatite + ferrorichterite + pyrrhotite ± apatite, although fayalite, ferrohedenbergite and ilmenite are absent from more evolved rocks (e.g. with SiO₂ > 71%). QUILF temperature calculations for the trachytes range from 709 to 793 °C and for the pantellerites 668–708 °C, the latter temperatures being among the lowest recorded for peralkaline silicic magmas. The QUILF thermobarometer demonstrates that the Eburru magmas crystallized at relatively low oxidation states (ΔFMQ + 0.5 to − 1.6) for both trachytes and pantellerites. The trachytes and pantellerites evolved along separate liquid lines of descent, the trachytes possibly deriving from a more mafic parent by fractional crystallization and the pantellerites from extreme fractionation of comenditic magmas.     

40Ar-39Ar age of carbonatite-alkaline magmatism in Sung valley, Meghalaya, India

⁴⁰Ar-³⁹Ar analyses of one alkali pyroxenite whole rock and two phlogopite separates of calcite carbonatites from the Sung Valley carbonatite-alkaline complex, which is believed to be a part of the Rajmahal-Bengal-Sylhet (RBS) flood basalt province, yielded indistinguishable plateau ages of 108.8 ± 2.0Ma, 106.4 ± 1.3Ma and 107.5 ± 1.4Ma, respectively. The weighted mean of these ages, 107.2 ± 0.8 Ma, is the time of emplacement of this complex. This implies that Sung Valley complex and probably other such complexes in the Assam-Meghalaya Plateau postdate the main flood basalt event (i.e., the eruption of tholeiites) in the RBS province by ∼10Ma.     

Phosphorus retention in calcareous soils and the effect of organic matter on its mobility

A survey of the interactions between phosphorus (P) species and the components of calcareous soils shows that both surface reactions and precipitation take place, especially in the presence of calcite and limestone. The principal products of these reactions are dicalcium phosphate and octacalcium phosphate, which may interconvert after formation. The role of calcium carbonate in P retention by calcareous soils is, however, significant only at relatively high P concentrations – non-carbonate clays play a more important part at lower concentrations. In the presence of iron oxide particles, occlusion of P frequently occurs in these bodies, especially with forms of the element that are pedogenic in origin. Progressive mineralization and immobilization, often biological in nature, are generally observed when P is added as a fertilizer.     

Complete preservation of ophiolite suite from south Andaman,India: A mineral-chemical perspective

Field studies supplemented by petrographic analyses clearly reveal complete preservation of ophiolite suite from Port Blair (11°39′N: 92°45′E) to Chiriyatapu (11°30′24″N: 92°42′30″E) stretch of South Andaman. The ophiolite suite reveals serpentinite at the base which is overlain unconformably by cumulate ultramafic-mafic members with discernible cumulus texture and igneous layering. Basaltic dykes are found to cut across the cumulate ultramafic-mafic members. The succession is capped by well exposed pillow basalts interlayered with arkosic sediments. Olivine from the basal serpentinite unit are highly magnesian (Fo_80.1–86.2). All clinopyroxene analyses from cumulate pyroxenite, cumulate gabbro and basaltic dyke are discriminated to be ‘Quad’ and are uniformly restricted to the diopside field. Composition of plagioclase in different lithomembers is systematically varying from calcic to sodic endmembers progressively from cumulate pyroxenite to pillow basalt through cumulate gabbro and basaltic dyke. Plagioclase phenocrysts from basaltic dyke are found to be distinctly zoned (An_60.7-An_35.3) whereas groundmass plagioclase are relatively sodic (An₃₃-An_23.5). Deduced thermobarometric data from different lithomembers clearly correspond to the observed preservation of complete ophiolite suite.     

Heat flow and crustal thermal structure in the Late Archaean Closepet Granite batholith,south India

The Late Archaean Closepet Granite batholith in south India is exposed at different crustal levels grading from greenschist facies in the north through amphibolite and granulite facies in the south along a ∼400 km long segment in the Dharwar craton. Two areas, Pavagada and Magadi, located in the Main Mass of the batholith, best represent the granitoid of the greenschist and amphibolite facies crustal levels respectively. Heat flow estimates of 38 mW m⁻² from Pavagada and 25 mW m⁻² from Magadi have been obtained through measurements in deep (430 and 445 m) and carefully sited boreholes. Measurements made in four boreholes of opportunity in Pavagada area yield a mean heat flow of 39 ± 4 (s.d.) mW m⁻², which is in good agreement with the estimate from deep borehole. The study, therefore, demonstrates a clear-cut heat flow variation concomitant with the crustal levels exposed in the two areas. The mean heat production estimates for the greenschist facies and amphibolite facies layers constituting the Main Mass of the batholith are 2.9 and 1.8 μW m⁻³, respectively. The enhanced heat flow in the Pavagada area is consistent with the occurrence of a radioelement-enriched 2-km-thick greenschist facies layer granitoid overlying the granitoid of the amphibolite facies layer which is twice as thick as represented in the Magadi area. The crustal heat production models indicate similar mantle heat flow estimates in the range 12–14 mW m⁻², consistent with the other parts of the greenstone-granite-gneiss terrain of the Dharwar craton.     

Vertisols (cracking clay soils) in a climosequence of Peninsular India: Evidence for Holocene climate changes

Smectitic parent material from the weathering Deccan basalt has been deposited in the lower piedmont plains, valleys and microdepressions during a previous wetter climate. The cracking clay soils (Vertisols) were developed in such alluvium during drier climate of the Holocene period. In India they occur in humid tropical (HT), sub-humid moist (SHM), sub-humid dry (SHD), semi-arid moist (SAM), semi-arid dry (SAD) and arid dry (AD) climatic environments and thus indicate an array of soils in a climosequence.The soils show a change in their morphological, physical, chemical and micromorphological properties in the climosequence. Soils of HT climate are dominated by Ca⁺⁺ ions in their exchange complex throughout depth. However, in the sub-humid climates Mg⁺⁺ ions tend to dominate in the lower horizons. The sub-humid moist to aridic climatic environments caused a progressive formation of pedogenic calcium carbonates (PC) with the concomitant increase in Na⁺ ions in soil solution. This facilitated the translocation of Na-clay in the soil profile. This is responsible for the increase in pH, decrease in Ca/Mg ratio of exchange sites with depth and finally in the development of subsoil sodicity. The reduction in mean annual rainfall (MAR) from sub-humid moist to arid climates accelerated the formation of PC and thus the soils of semi-arid and arid climates (SAM, SAD and AD) are more calcareous and sodic than soils of other climates (SHM and SHD).Formation of PC, illuviation of clay and the development of subsoil sodicity are concurrent, contemporary and active pedogenetic processes operating during the climate change of the Holocene period. These processes impaired the hydraulic properties of soils in general, and in soils of drier climates in particular. As a result, cracking pattern, chemical composition and plasmic fabric were more modified in soils of the drier climates. Such modifications in soil properties have a place in the rationale of Vertisol order of the US Soil Taxonomy. The soils of wetter climates (HT, SHM and SHD) are grouped in Typic Haplusterts whereas the soils of drier climates (SAM, SAD and AD) are classified as Aridic Haplusterts, Sodic Haplusterts and Sodic Calciusterts. The present study demonstrates how the intrinsic soil properties of the cracking clay soils in a climosequence may help in inferring the change in climate in a geologic period.     

Application of soft computing techniques for shallow foundation reliability in geotechnical engineering

This research focuses on the application of three soft computing techniques including Minimax Probability Machine Regression(MPMR),Particle Swarm Optimization based Artificial Neural Network(ANN-PSO)and Particle Swarm Optimization based Adaptive Network Fuzzy Inference System(ANFIS-PSO)to study the shallow foundation reliability based on settlement criteria.Soil is a heterogeneous medium and the involvement of its attributes for geotechnical behaviour in soil-foundation system makes the prediction of settlement of shallow a complex engineering problem.This study explores the feasibility of soft computing techniques against the deterministic approach.The settlement of shallow foundation depends on the parametersγ(unit weight),e0(void ratio)and CC(compression index).These soil parameters are taken as input variables while the settlement of shallow foundation as output.To assess the performance of models,different performance indices i.e.RMSE,VAF,R^2,Bias Factor,MAPE,LMI,U(95),RSR,NS,RPD,etc.were used.From the analysis of results,it was found that MPMR model outperformed PSO-ANFIS and PSO-ANN.Therefore,MPMR can be used as a reliable soft computing technique for non-linear problems for settlement of shallow foundations on soils.     

Integrated Two-Dimensional Modeling of Fluid Flow and Compaction in a Sedimentary Basin

In this paper we employ mixed finite elements and numerically study an integrated two-dimensional model of fluid flow and compaction in a sedimentary basin. This model describes a single phase incompressible flow in a two-dimensional section of a sedimentary basin with vertical compaction. At each time step, an iterative algorithm is used to solve this model. The determination of the grid movement is based on the mass conservation and movement of sediments in the basin, while the mixed method is utilized to solve the fluid flow over the moving grid. Numerical experiments are presented to verify this iterative algorithm and show representative solutions for the model under consideration.     

Response of low‐angle dunes to variable flow

Current understanding of bedform dynamics is largely based on field and laboratory observations of bedforms in steady flow environments. There are relatively few investigations of bedforms in flows dominated by unsteadiness associated with rapidly changing flows or tides. As a consequence, the ability to predict bedform response to variable flow is rudimentary. Using high‐resolution multibeam bathymetric data, this study explores the dynamics of a dune field developed by tidally modulated, fluvially dominated flow in the Fraser River Estuary, British Columbia, Canada. The dunes were dominantly low lee angle features characteristic of large, deep river channels. Data were collected over a field ca 1·0 km long and 0·5 km wide through a complete diurnal tidal cycle during the rising limb of the hydrograph immediately prior to peak freshet, yielding the most comprehensive characterization of low‐angle dunes ever reported. The data show that bedform height and lee angle slope respond to variable flow by declining as the tide ebbs, then increasing as the tide rises and the flow velocities decrease. Bedform lengths do not appear to respond to the changes in velocity caused by the tides. Changes in the bedform height and lee angle have a counterclockwise hysteresis with mean flow velocity, indicating that changes in the bedform geometry lag changes in the flow. The data reveal that lee angle slope responds directly to suspended sediment concentration, supporting previous speculation that low‐angle dune morphology is maintained by erosion of the dune stoss and crest at high flow, and deposition of that material in the dune trough.