Integral transformations of gradiometric data onto a GRACE type of observable

Integral transformations of gravitational gradients onto a Gravity Recovery And Climate Experiment (GRACE) type of observable are derived in this article. The gravitational gradients represent components of the gravitational tensor in the local north-oriented frame. The GRACE type of observable corresponds to a difference between two gravitational vectors as projected onto the line of sight between the two GRACE satellites. In total, three integral transformations relating vertical–vertical, vertical–horizontal and horizontal–horizontal gravitational gradients with the GRACE type of observable are provided. Spectral and closed forms of corresponding isotropic kernels are derived for each transformation. Special cases show that the integral transformations are general and relate gravitational gradients to many other quantities of the gravitational field, such as the gravitational vector, and its radial and tangential components. Correctness of the mathematical derivations is validated in a closed-loop simulation using synthetic data.     

Direct detection of the secondary spectrum of the interacting eclipsing binary TX UMa

Eclipsing binary TX UMa was observed with the D.A.O. high-dispersion spectrographs in 1969–1970, with emphasis on the detailed coverage of the primary minimum. One spectrum was taken exclusively within totality, thus exhibiting an uncontaminated spectrum of the secondary component. This leads to spectral reclassification of the secondary (F6 IV). The narrowing of the line profile of the H-line in totality is interpreted in terms of synchronous rotation of the secondary (v sini80 km s^–1) while the primary rotates faster (v sini130 km s^–1) than synchronously (v sini50 km s^–1). Although the secondary does not fill in its Roche lobe fully, the system exhibits pronounced indications of rather strong physical interaction. This is now supported also by the profound changes of the line profiles of the H-line with phase.     

Sustainable landscape management in Slovenia: Environmental improvements for the Velenje coal mining community 1991–2000

The Velenje area (almost 200 km² with over 31,000 inhabitants) is based on the Šalek Valley, which became a leading area of industrialisation and urbanisation after the Second World War, with consequent pollution problems. Various industrial plants polluted the river Paka while more serious hazards arose through the coal mine which is a still causing landscape subsidence and the thermal power station in the neighbourhood of Šoštanj which is a major source of sulphur dioxide and nitrogen oxide pollution. In 1987 there was an ecological protest which marked the beginning of a sustainable development strategy for the community. During the past decade programmes have dealt with the degradation of air, soil and water to achieve cleaner air, a transformation in landuse and enhancement the river's formerly weak self-purifying capabilities. This article examines the changes in the valley since the attention of the authorities was drawn to the deterioration of living conditions. Despite the pressures of transition which have seen unemployment rising to over ten percent, significant environmental improvements have been made and the area stands as a model for the rest of the country. This revised version was published online in July 2006 with corrections to the Cover Date.     

Some remarks on the estimation of geothermal topocorrections

Summary The paper deals with some problems connected with the evaluation of the temperature gradient topocorrections for the purposes of the Earth's heat flow measurements. Some errors, occurring in the routine use of the method, suggested by Jeffreys and Bullard (JB method), are discussed. An example of simple topographic features is used to compare this method with the results obtained by a numerical solution of the heat conduction equation (NS method) by means of the finite difference method. The calculations have shown that the NS method is more precise, but its results are very sensitive to the approximation of the surface used. A stepwise approximation of the surface used in a 3-D model of a real mountainous region causes artificial oscillations of the surface values of the topocorrections, and the accuracy of the obtained results is comparable with that of the JB method. Thus, we are faced with the problem of a more appropriate approximation of the relief without the mentioned negative consequences to the superficial values of the topocorrections.

---

¶rt;am n, a mnauu ua¶rt;uma mnam nu uu mn nma. u m uu, nu n mu nuu m¶rt;a, m n¶rt; u u a¶rt; (J B m¶rt;). a nu nm mnau mm m¶rt; a u u au mnn¶rt;mu (NS m¶rt;) n n am. uu naau, m NS m¶rt; m JB m¶rt;, m mam u mum annuauu nmu. B a - ¶rt;u ¶rt;mum amu nu¶rt;um mnama annuau u au nm au mnu u mm n mam aua mm JB m¶rt;a. a naa, m n unau num NS m¶rt;a a¶rt; nmu a¶rt; nuuu nmu.

     

Biomarker distributions as indicators for the depositional environment of lacustrine sediments in the Valjevo-Mionica basin (Serbia)

In this study, the molecular composition and biomarker distribution of lacustrine sediments from Val-1 drillhole in the central zone of the western part of the Valjevo-Mionica basin were investigated at depth interval of 0–400 m. Former investigations have shown that the core material can be separated into six depth intervals based on bulk geochemical, mineralogical and sedimentological characteristics. Concerning the quality of organic matter, presence of specific minerals, and high salinity and anoxicity, or alkalinity, three zones are of highest interest, defined at depth intervals of 15–75 m (A), 75–200 m (B) and 360–400 m (F). The first aim of the study was to identify which biomarkers characterize these specific intervals. The second aim, addressing the transitions zones of these intervals, was to extend the changes in the characteristics of the organic substance, to reflect the changes of conditions in the depositional environment as well as to define biomarker parameters which are the most sensitive sedimentological indicators.The sediments from the hypersaline anoxic and alkaline environment show high contribution of algal precursor biomass, what is in accordance with the good quality of organic substances in the sediments from these zones. High squalane content and low content of regular isoprenoid C₂₅ are typical for hypersaline anoxic environment, whereas sediments from alkaline environment have high regular isoprenoid C₂₅ content.Transition to specific sedimentation zones is characterized by change in total organic matter content, and of both free and pyrolysis-derived, and change in hydrogen index value. In the biomarker distributions, more significant changes were detected in distributions of n-alkanes and isoprenoids, compared to polycyclic alkanes. The most intensive changes in alkane distribution are reflected in changes in n-C₁₇ content compared to n-C₂₇, and phytane compared to n-C₁₈. In addition, significant sensitivity was seen in ratios between squalane and n-alkane C₂₆ (hypersaline depositional environment), or isoprenoid C₂₅ and n-alkane C₂₂ for high alkalinity environment.This study showed that Sq/n-C₂₆ ratio can be used to assess the quality of organic substance in immature lacustrine sediments.     

On the detailed magnetostratigraphy of greigite — (Smythite) mineralization,Sokolov Brown-Coal Basin,bohemia

Summary In the Middle Miocene claystones containing fossil micro-organic matter and overlying the brown-coal seams in the Jii quarry of the Sokolov Brown-Coal Basin, a strongly magnetic layer was found and subjected to detailed palaeomagnetic investigations. The principal carrier of magnetism in this bed (called Kocián's bed) is the ferrimagnetic mineralization of greigite or greigitesmythite showing pronounced metastable properties. This mineralization must be treated with caution during laboratory tests aimed at deriving palaeomagnetic directions. In Kocián's bed, about two metres thick, two zones of palaeomagnetic field transition were identified. The high degree of demagnetization achieved by using thermal stepwise procedures and a MAVACS apparatus enabled the origin of the self-reversal of remanence to be defined after heating to 360°C. The process of chemo-remanent magnetization of the authigenic greigite-(smythite) mineralization fossilizing the palaeomagnetic field was relatively fast; the transition of the palaeomagnetic field is recorded in layers not exceeding a thickness of 2 × 10^–2 m.Presented at 2nd conference on New Trends in Geomagnetism, Castle of Bechyn, Czechoslovakia, September 24–29, 1990.     

Frequency modified fourier transform and its application to asteroids

Recently a method has been suggested to analyze the chaotic behaviour of a conservative dynamical system by numerical analysis of the fundamental frequencies. Frequencies and amplitudes are determined step by step. As the frequencies are not generally orthogonal, a Gramm-Schmidt orthogonalization is made and for each new frequency the old amplitudes of previously determined frequencies are corrected. For a chaotic trajectory variations of the frequencies and amplitudes determined over different time periods are expected. The change of frequencies in such a calculation is a measure of the chaoticity of the trajectory. While amplitudes are corrected, the frequencies (once determined) are constant. We suggest here simple linear corrections of frequencies for the effect of other close frequencies. The improvement of frequency determination is demonstrated on a model case. This method is applied to the first fifty numbered asteroids.     

Factors affecting the Nd3+ (REE3+) luminescence of minerals

In this paper, possibilities and limits of the application of REE³⁺ luminescence (especially the Nd^{3+ 4}F_3/2 → ⁴I_9/2 emission) as structural probe are evaluated. Important factors controlling the Nd³⁺ luminescence signal are discussed, including effects of the crystal-field, crystal orientation, structural state, and temperature. Particular attention was paid to the study of the accessory minerals zircon (ZrSiO₄), xenotime–(Y) (YPO₄), monazite–(Ce) (CePO₄) and their synthetic analogues. Based on these examples we review in short that (1) REE³⁺ luminescence can be used as non-destructive phase identification method, (2) the intensities of certain luminescence bands are strongly influenced by crystal orientation effects, and (3) increased widths of REE³⁺-related emission bands are a strong indicator for structural disorder. We discuss the potential of luminescence spectroscopy, complementary to Raman spectroscopy, for the quantitative estimation of chemical (and potentially also radiation-induced) disorder. For the latter, emissions of Nd³⁺-related centres are found to be promising candidates.     

A method of computing the vertical profile of ozone concentration based on radiation field analysis

Summary A methodical approach is presented of solving the inverse problem of atmospheric optics for the vertical profile of ozone concentration. Observations of spectral sky radiance and direct solar radiation are taken as input data. A gradient method is suggested for solving the inverse problem. on leave from the Astronomical Institute, Slovak Academy of Sciences