Age model, physical properties and paleoceanographic implications of the middle Pleistocene core sediments in the Choshi area, central Japan

Abstract   A continuous, well-preserved core was obtained from the Choshi area, on the Pacific side of Japan, to investigate paleoceanographic and paleoclimatic changes around the northwestern Pacific region during the middle Pleistocene. Siliciclastic sequences in the core are divided into five formations – the Obama, Yokone, Kurahashi and Toyosato Formations in the Inubo Group and the Katori Formation, in ascending order. Examination of calcareous nannofossils and magnetic polarities detected four datums in the core sediments of the Inubo Group: the top of Reticulofenestra asanoi , the base of Helicosphaera inversa , the top of Pseudoemiliania lacunosa and the Brunhes–Matuyama boundary. Fourteen marine isotope stages (MIS24–MIS11) were identified in the δ¹⁸O and δ¹³C records based on detected datums and the graphic correlation with the standard stack oxygen isotope curve. Magnetic susceptibility and gamma-ray attenuation porosity evaluator density were also measured and low values characterize the glacial intervals. Biogenic sedimentation by primary production may be larger during the glacial periods because of invasions of nutrient-rich northern surface-waters related to the southward shift of the Kuroshio front in the Choshi area.     

Towards a direct collapse–load method of design for concrete frames subjected to severe ground motions

Most current methods of design for concrete structures under earthquake loads rely on highly idealized ‘equivalent’ static representations of the seismic loads and linear‐elastic methods of structural analysis. With the continuing development of non‐linear methods of dynamic analysis for the overload behaviour and collapse of complete concrete structures, a more direct and more accurate design procedure becomes possible which considers conditions at system collapse. This paper describes an evaluation procedure that uses non‐linear dynamic collapse–load analysis together with global safety coefficients. A back‐calibration procedure for evaluating the global safety coefficients is also described. The aim of this paper is to open up discussion of alternative methods of design with improved accuracy which are necessary to move towards a direct collapse–load method of design. Copyright © 2002 John Wiley & Sons, Ltd.     

Oxygen isotope fractionation factors between anhydrite and water from 100 to 550°C

Oxygen isotope exchange between anhydrite and water was studied from 100 to 550°C, using the partial equilibrium method. The exchange rate was extremely low in NaCl solution. In the lower-temperature range, acid solutions were used to produce sufficient reaction to determine the oxygen isotope fractionation factors. The fractionation factors obtained in the present study are definitely different from those given by Lloyd [8]. They are similar to those for the HSO₄^?-water system studied by Mizutani and Rafter [19], and are consistently 2‰ higher than those of the barite-water system by Kusakabe and Robinson [5]. The temperature dependence of the oxygen isotope fractionation factors was calculated by the least squares method in which the weight was taken to be inversely proportional to the experimental error. The fractionation is given by:10³lnαanhydrite-water=3.21×(10³/T)²?4.72Available δ¹⁸O values of natural anhydrite were used to test the validity of this expression. It is shown that this newly revised geothermometer can be successfully applied to natural hydrothermal anhydrite.     

Depositional history of artificial radionuclides in the Ross Ice Shelf,Antarctica

The annual fluxes of artificial radionuclides (²³⁸Pu,^239+240Pu,²⁴¹Am,¹³⁷Cs,⁹⁰Sr and³H) from the atmosphere to the Ross Ice Shelf in Antarctica were determined from measurements in strata dated by²¹⁰Pb. Recognizable sources include the U.S. tests (Mike-Ivy and Castle Hill) in the early 1950s, the U.S.S.R. tests of the early 1960s, the SNAP-9A burnup of 1964 and the French and Chinese tests in the late 1960s and 1970s. There are several problems still awaiting resolution: the differences in atmospheric chemistries of fission products and of transuranics produced in weapons tests and the anomalous fluxes of²³⁸Pu to the ice shelf which do not appear to reflect a one-year stratospheric residence. There is no evidence for a smearing of the fallout record as a consequence of diffusion of these radionuclides in the glacial column.     

Solar vector magnetograms of the Okayama Astrophysical Observatory

The title instrument is mounted on the 65 cm solar Coudé telescope at the Okayama observatory. Observation is usually of the Fei 5250 Å line. The data obtained are briefly described.Paper presented at the IAU Third Asian-Pacific Regional Meeting, held in Kyoto, Japan, between 30 September–6 October, 1984.     

Co-oscillating and independent tides of the Japan Sea

The generation of tides in the Japan Sea is investigated with relation to the tidal volume fluxes at the attached straits, which are estimated with the observed tidal current data. After the tides are separated into the co-oscillating tides induced by the tidal volume fluxes and the independent tide by the tide-generating force, their contributions to the Japan Sea tides are clarified using a one-dimensional tidal model.For the semidiurnal tide, the co-oscillating tide by the Tusima Strait is dominated in all of the area except the gulf of Tartary, and those by the Tugaru and Soya Straits are not effective anywhere. In the gulf of Tartary, the amplitude of the independent tide is the same as that of the co-oscillating tide attributed to the Tusima Strait.For the diurnal tide, the independent tide is not effective anywhere. The co-oscillating tide by the Tusima Strait is largest and those by the Tugaru and Soya Straits are also influential. In particular, the shifting of the diurnal amphidromic point to the Korean side is caused by the latter.     

Microbial responses using denaturing gradient gel electrophoresis to oil and chemical dispersant in enclosed ecosystems

Microbial responses to the addition of oil with or without a chemical dispersant were examined in mesocosm and microcosm experiments by using denaturing gradient gel electrophoresis of bacterial ribosomal DNA and direct cell counting. When a water-soluble fraction of oil was added to seawater, increases in cell density were observed in the first 24h, followed by a decrease in abundance and a change in bacterial species composition. After addition of an oil-dispersant mixture, increases in cell density and changes in community structure coincided, and the amount of bacteria remained high. These phenomena also occurred in response to addition of only dispersant. Our results suggest that the chemical dispersant may be used as a nutrient source by some bacterial groups and may directly or indirectly prevent the growth of other bacterial groups.     

Comparative analysis of contributing parameters for rainfall-triggered landslides in the Lesser Himalaya of Nepal

In the Himalaya, people live in widely spread settlements and suffer more from landslides than from any other type of natural disaster. The intense summer monsoons are the main factor in triggering landslides. However, the relations between landslides and slope hydrology have not been a focal topic in Himalayan landslide research. This paper deals with the contributing parameters for the rainfall-triggered landslides which occurred during an extreme monsoon rainfall event on 23 July 2002, in the south-western hills of Kathmandu valley, in the Lesser Himalaya, Nepal. Parameters such as bedrock geology, geomorphology, geotechnical properties of soil, and clay mineralogy are described in this paper. Landslide modeling was performed in SEEP/W and SLOPE/W to understand the relationship of pore water pressure variations in soil layers and to determine the spatial variation of landslide occurrence. Soil characteristics, low angle of internal friction of fines in soil, medium range of soil permeability, presence of clay minerals in soil, bedrock hydrogeology, and human intervention were found to be the main contributing parameters for slope failures in the region.     

The spatial correlation between earthquakes and landslides in Hokkaido (Japan), a GIS-based analysis of the past and the future

Although earthquakes are thought to be one of the factors responsible for the occurrence of landslides in Hokkaido, there exist no enough records which can allow correlating many of the old slope failures in the island with earthquakes. In the absence of these records, an attempt was done in this study to use the abundance, frequency, magnitude, depth, and distribution of historical earthquakes to deduce that many of the slope failures in the region were triggered by strong and continuous seismicity. The determination of the zones of influences of selected earthquakes using an existing empirical function has also supported this conclusion. Moreover, the use of a 10% probability of exceedance of earthquake intensity in 50 years, and the geological and slope maps has allowed preparing a landslide hazard map which explains the role of future earthquakes in the formation of slope failures. The result indicates a high probability of occurrences of landslides in the hilly regions of the southeastern part of Hokkaido due to expected strong seismicity and earthquake intensities in these areas. On the other hand, the low level of intensity in the north has given rise to low probability of landslide hazard. There are also places in the center of the island and high intensity regions in the east where the probability of landslide hazard was influenced by the contribution of the geological and slope maps.     

Temperatures and Oxygen Isotopic Compositions of Hydrothermal Fluids for the Takatori Tungsten-copper Deposit, Japan

Abstract. Fluid inclusion and oxygen isotope studies are performed to obtain temperatures and oxygen isotopic compositions of hydrothermal fluids for the vein-type tungsten-copper deposit at Takatori in Ibaraki Prefecture, Japan. Temperatures of the hydrothermal fluids are calculated from fluid inclusion data. The calculation incorporates the effects of the salinity, gas concentration, and fluid pressure. The fluid temperatures range from 370 to 460C. For these calculations, this study obtains a density equation for H₂O-NaCl-CO₂ solution at the vapor-liquid two-phase boundary. Then the present study combines the obtained equation with the equation of state by Bowers and Helgeson (1983).
The fluid temperatures determined in this study are applied to the calculation of oxygen isotopic compositions of the hydrothermal fluids. The calculation of the oxygen isotopic compositions is based on the oxygen isotope analyses of vein quartz. The oxygen isotopic compositions of vein quartz range from +13.5 to +14.4 % relative to SMOW. Then, the oxygen isotopic compositions of the hydrothermal fluids in equilibrium with the vein quartz are calculated to be from +9.7 to +10.5 %. These δ¹⁸O_fluid values agree with those of magmatic fluids derived from the ilmenite-series granitic rock, which is related to the mineralization. Keywords: Takatori tungsten-copper deposit, fluid inclusion, oxygen isotope, vein quartz, H₂O-NaCl-CO₂ solution, density