南海和冲绳海槽沉积物的生物标记化合物

本文对南海深海和冲绳海槽二个柱状样进行了正构烷烃、甾烷和萜烷生物标记化合物分布特征的研究。由于它们所处的沉积环境和生源母质上的差异,反映在正构烷烃的CPI值、C_(17)和C_(18)的含量、轻重烃比值、化合物构型的转化、有机质的成熟度和17α(H)-22,29,30-三降藿烷与18α(H)-22,29,30-三降新藿烷的比值等地球化学参数上的差别。冲绳海槽沉积物的多源性决定了其有机组分的特殊性,如生物来源的C_(17)和C_(18)量占有优势,有机碳含量(1.0—1.3％)高于南海样(0.3—1.0％),重排甾烷量少,生物构型的ββ藿烷已转变成地质构型的αβ藿烷和βα型莫烷化合物。     

Water mass formation variability in the intermediate layer of the east sea

Long-term variability in the intermediate layer of the eastern Japan Basin has been investigated to understand the variability of water mass formation in the East Sea. The simultaneous decrease of temperature at shallower depths and oxygen increasing at deeper depths in the intermediate layer took place in the late 1960’s and the mid-1980’s. Records of winter sea surface temperatures and air temperatures showed that there were cold winters that persisted for several years during those periods. Therefore, it was assumed that a large amount of newly-formed water was supplied to the intermediate layer during those cold winters. Close analysis suggests that the formation of the Upper Portion of Proper Water occurred in the late 1960’s and the Central Water in the mid-1980’s.     

一种腐屑食性鱼类对生态系统氮循环的影响

研究表明 :腐屑食性鱼类——梭鱼对环境中有机氮的摄入能力随体重的增加而增加 ,随温度的升高 ,体重系数显著减少。摄入氮 (CN,mg/ d)与体重 (W,g)和温度 (T,℃ )的数值关系可用如下模型表示 :CN=0 .6 370 W1 .0 642 ln(3.70 0 8T)。体重为 1 0 0 g的梭鱼每日可消耗环境中 332 mg氮有机质。梭鱼氮的吸收效率主要受温度的影响 ,而氮的转化效率与体重呈显著的正相关关系。随体重的增加 ,排泄氮所占比例降低     

真光层的颗粒动力学──Ⅵ.南海东北部海域上层水体颗粒动力学的示踪研究

利用234Th－238U不平衡研究南海东北部海域3个站位上层水体中的颗粒动力学性质，测定了水往中溶解态及颗粒态234Th的比活度，具体讨论各相中234Th／238U）AR（放射性活度比）比值的垂直分布情况及其与水化学要素间的关系。运用稿态箱式模型计算出各站位不同水层中溶解态234Th相对于清除至颗粒物的平均停留时间和颗粒态234Th相对于迁出作用的停留时间。由模型得出的参数表明3个站位的真光层具有两种不同的层化图像，这一情形与我们在南沙群岛海域得到的结果相一致。结合POC／PTh比值，估算出3个站位从真光层输出的颗粒有机碳（POC）通量分别为4.025.0和5．4mmolC·m－3－d-1。文中进一步讨论了234Th与POC两者停留时间的关系。     

Comparison of Drags on Fish Cages of Different Shapes

1 .Introduction Commercial fishfarming in net cages is becoming widespread around the world as an importantsource of food.In PRChina ,mostfishfarmingtakes placeincalmcoastal areas .Fishcages work wellat these sites becausethe environmental forces are usua…     

转“全鱼”溶菌酶基因大菱鲆的研究

用大西洋条鳕(Macrozoarces americanus)抗冻蛋白启动子opAFP promoter和牙鲆(Paralichthys olivaceus)c型溶菌酶基因构建“全鱼”溶菌酶基因元件opAFP—ly，首次应用电脉冲精子介导法将该基因片段导入到大菱鲆(Scophthalmus maximus)受精卵内，获得原代转基因大菱鲆。先后采用单因子方法和正交实验方法，重复实验确定了最适导入条件：脉冲电压为400V／cm，脉冲次数为5，脉冲宽度为25ms，外源DNA浓度为50mg/L。利用最适导入条件，实现基因元件大规模转移。采用PCR技术对1月龄的原代转基因大菱鲆仔鱼的染色体DNA进行分析，结果表明外源基因的整合率可达28％。     

层结流体中的非线性惯性重力内波

根据地球流体力学基本方程组,在密度垂直层结的情况下,引进行波坐标,研究非线性定形波在相平面上的几何拓扑结构。严格论证了不存在定形孤立波,并通过Ｈａｍｉｌｔｏｎ函数及其角作用变把行波系统化成最简形式,由此而得到非线性惯性重力内波的解析解。     

AEL—1型风向,风速仪

本文介绍并叙述了AEL-1型风向、风速仪的设计原理,仪器各部分的电路设计,工作过程及系统软件。该仪器适用于气象台站、工矿企业、海上浮标及科研单位等部门。     

海洋作业渔船管理系统的设计与运行试验

对渔政管理指挥系统建设项日中的业务软件部分渔船管理系统的设计方案进行了介绍。根据我国渔洋作业渔船的实际管理模式，提出了渔船管理系统设计方案。系统通过网络化的业务处理和管理流程，规范渔船建造、审批、登记以及捕捞许可证发放等管理业务，实现渔船控制指标的统一分配，以控制捕捞业发展规模和保护我国的渔业资源。系统以Microsoft VB6．0，Delphi6．0开发，在Window98／2000／XP环境下运行。通过运行试验，对系统运行环境进行了评估，为渔政管理信息化的建设、系统升级提供了经验和技术依据。     

Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.