Theory and Experiment on an Elastically Moored Cylindrical Buoy

In this paper, we compare simulated forces and accelerations for a moored floating buoy with full-scale experimental results in real ocean waves. The buoy is moored with a wire connected by springs to a concrete foundation situated at the seafloor. This study aims to develop a computer model using potential theory with a linearized free-surface boundary condition to describe the motion of such a system. The intention is to use the model for future study of wave-energy absorption and design of converters. Another objective is to see how complex a model is required to get accurate results. The method used is computationally fast and makes it possible to couple linear buoy wave interaction with nonlinear generator models, so that different loads and latching can be studied. A computationally fast method is required to model farms of wave-energy converters     

Geochemical mapping using stream sediments in west-central Nigeria: Implications for environmental studies and mineral exploration in West Africa

This paper provides an overview of regional geochemical mapping using stream sediments from central and south-western Nigeria. A total of 1569 stream sediment samples were collected and 54 major and trace elements determined by ICP-MS and Au, Pd and Pt by fire assay. Multivariate statistical techniques (e.g., correlation analysis and principal factor analysis) were used to explore the data, following appropriate data transformation, to understand the data structure, investigate underlying processes controlling spatial geochemical variability and identify element associations. Major geochemical variations are controlled by source geology and provenance, as well as chemical weathering and winnowing processes, more subtle variations are a result of land use and contamination from anthropogenic activity.     

Impact of climate on landscape form,sediment transfer and the sedimentary record

The relationship between climate, landscape connectivity and sediment export from mountain ranges is key to understanding the propagation of erosion signals downstream into sedimentary basins. We explore the role of connectivity in modulating the composition of sediment exported from the Frontal Cordillera of the south-central Argentine Andes by comparing three adjacent and apparently similar semi-glaciated catchment-fan systems within the context of an along-strike precipitation gradient. We first identify that the bedrock exposed in the upper, previously glaciated reaches of the cordillera is under-represented in the lithological composition of gravels on each of three alluvial fans. There is little evidence for abrasion or preferential weathering of sediment sourced from the upper cordillera, suggesting that the observed bias can only be explained by sediment storage in these glacially widened and flattened valleys of the upper cordillera (as revealed by channel steepness mapping). A detailed analysis of the morphology of sedimentary deposits within the catchments reveals catchment-wide trends in either main valley incision or aggradation, linked to differences in hillslope–channel connectivity and precipitation. We observe that drier catchments have poor hillslope–channel connectivity and that gravels exported from dry catchments have a lithological composition depleted in clasts sourced from the upper cordillera. Conversely, the catchment with the highest maximum precipitation rate exhibits a high degree of connectivity between its sediment sources and the main river network, leading to the export of a greater proportion of upper cordillera gravel as well as a greater volume of sand. Finally, given a clear spatial correlation between the resistance of bedrock to erosion, mountain range elevation and its covariant, precipitation, we highlight how connectivity in these semi-glaciated landscapes can be preconditioned by the spatial distribution of bedrock lithology. These findings give insight into the extent to which sedimentary archives record source erosion patterns through time.     

Comparison of UV and IR Laser Ablation ICP-MS on Silicate Reference Materials and Implementation of Normalisation Factors for Quantitative Measurements

Direct analysis of geological reference materials was performed by LA-ICP-MS using two Nd:YAG laser systems operating at 266 nm and 1064 nm. The aim of this work was to compare UV and IR laser ablation and to assess the potential of the technique for the quantitative bulk analysis of rocks, sediments and soils. The laser sampling process was investigated and the analytical performance of both systems was compared. The influence of the laser operating conditions and the nature of the matrix on ICP-MS response factors calculated for major, minor and trace elements was evaluated. Under consistent laser settings, the response factors appeared to be matrix dependent. For a given matrix, the response factors were also significantly different for the two lasers. Normalisation with a single matrix element was effective only for matrices with similar mineralogy. When operating at 266 nm instead of 1064 nm, matrix effects could be reduced but not overcome. However, variations of the response factors between the different matrices appeared to be similar within distinct groups of elements, reflecting geochemical associations. When using multiple internal standards, matrix effects but also effects of the laser wavelength, could be fully compensated.     

Displaced-Beam Small Aperture Scintillometer Test. Part I: The Wintex Data-Set

The friction velocity (u_*) and the sensible heat flux density (H) determined with a displaced-beam small aperture scintillometer (DBSAS) and a hot-film eddy correlation system are compared. Random errors in the DBSAS are relatively small, compared to scatter found with two eddy-correlation systems. Assuming that the hot-film system yields the true fluxes, theDBSAS appears to overestimate u_* when u_* is less than 0.2 m s^-1 and to underestimate u_* at high wind speeds. This implies that the DBSAS measurements of theinner scale length of turbulence, l₀, a direct measure for the dissipation rate of kinetic turbulent energy, are biased. Possible causes for these results are discussedin detail. A correction procedure is presented to account for effects of random noise and of so-called inactive turbulence or sensor vibrations. The errors in u_* cause errors in the DBSAS measurements of the structure parameter of temperature C_T ². The derived H appears to be less sensitive to errors in l₀ and C_T ², because errors in these quantities tend to cancel out.     

Biological record of added manganese in seawater: a new efficient tool to mark in vivo growth lines in the oyster species Crassostrea gigas

The biological response of increased manganese in seawater was tested experimentally with the oyster species Crassostrea gigas by adding, once per day, a fixed quantity of MnCl₂ to the container where the oysters were living. Uptake of Mn²⁺ in the shell was traced with cathodoluminescence and quantified with a high spatial resolution proton microprobe. The daily addition of MnCl₂ resulted in the visualization of distinct growth increments seen simultaneously in both the calcitic shell and the aragonitic ligament. A relation was observed between the addition of Mn²⁺ to the seawater and incorporation of Mn in the mineral part of the shell. Thus, addition of MnCl₂ to seawater is an efficient tool to mark in vivo growth increments in bio-mineralised carbonates.     

The challenges of monitoring national climate policy: learning lessons from the EU

One of the most central and novel features of the new climate governance architecture emerging from the 2015 Paris Agreement is the transparency framework committing countries to provide, inter alia, regular progress reports on national pledges to address climate change. Many countries will rely on public policies to turn their pledges into action. This article focuses on the EU’s experience with monitoring national climate policies in order to understand the challenges that are likely to arise as the Paris Agreement is implemented around the world. To do so, the research employs – for the first time – comparative empirical data submitted by states to the EU’s monitoring system. Our findings reveal how the EU’s predominantly technical interpretation of four international reporting quality criteria – an approach borrowed from reporting on GHG fluxes – has constrained knowledge production and stymied debate on the performance of individual climate policies. Key obstacles to more in-depth reporting include not only political concerns over reporting burdens and costs, but also struggles over who determines the nature of climate policy monitoring, the perceived usefulness of reporting information, and the political control that policy knowledge inevitably generates. Given the post-Paris drive to achieve greater transparency, the EU’s experience offers a sobering reminder of the political and technical challenges associated with climate policy monitoring, challenges that are likely to bedevil the Paris Agreement for decades to come.

Policy relevance

The 2009 Copenhagen summit ushered in a more bottom-up system of international climate governance. Such systems typically depend on strong monitoring approaches to assess past performance and estimate future national contributions over time. This article shows why decision makers at multiple governance levels should pay serious attention to empirical data on the experiences and challenges that have emerged around monitoring in the EU, a self-proclaimed climate leader. The analysis highlights key political and administrative challenges that policy makers will likely encounter in implementing climate policy monitoring and ensuring transparency in the spirit of the Paris Agreement.     

Combining airborne laser scanning and Landsat data for statistical modeling of soil carbon and tree biomass in Tanzanian Miombo woodlands

Background

Soil carbon and biomass depletion can be used to identify and quantify degraded soils, and by using remote sensing, there is potential to map soil conditions over large areas. Landsat 8 Operational Land Imager satellite data and airborne laser scanning data were evaluated separately and in combination for modeling soil organic carbon, above ground tree biomass and below ground tree biomass. The test site is situated in the Liwale district in southeastern Tanzania and is dominated by Miombo woodlands. Tree data from 15 m radius field-surveyed plots and samples of soil carbon down to a depth of 30 cm were used as reference data for tree biomass and soil carbon estimations.

Results

Cross-validated plot level error (RMSE) for predicting soil organic carbon was 28% using only Landsat 8, 26% using laser only, and 23% for the combination of the two. The plot level error for above ground tree biomass was 66% when using only Landsat 8, 50% for laser and 49% for the combination of Landsat 8 and laser data. Results for below ground tree biomass were similar to above ground biomass. Additionally it was found that an early dry season satellite image was preferable for modelling biomass while images from later in the dry season were better for modelling soil carbon.

Conclusion

The results show that laser data is superior to Landsat 8 when predicting both soil carbon and biomass above and below ground in landscapes dominated by Miombo woodlands. Furthermore, the combination of laser data and Landsat data were marginally better than using laser data only.

     

Application of a mass-balance model to predict PCDD/F turnover in a Baltic coastal estuary

A dynamical, process-based mass-balance model was applied to quantify the transports of polychlorinated-p-dibenzodioxins and dibenzofurans (PCDD/Fs) to, within and from the Kallrigafjärden Bay, a coastal estuary in the Baltic Sea, and to predict the PCDD/F levels in the water and sediments of the bay. Before the modelling, a one-year sampling programme was implemented in 2007–2008 to measure the flows of PCDD/Fs in tributaries entering the system, the fluxes from the adjacent sea and the levels in water, sediment and fish within the estuary. The collected data set was used as input data to the model and for validation purposes.