Natural Geological Weighing Lysimeters: Calibration Tools for Satellite and Ground Surface Gravity Monitoring of Subsurface Water-Mass Change

Increased accuracy in measuring temporal variations in the Earth's gravity field allow inprinciple the use of gravity observations to deduce subsurface water-mass changes. This canbe with respect to a small area, or as a larger spatial average of water mass change usinggravity observations from low-altitude satellites, such as the forthcoming GRACE mission.At both scales, there is a need to validate gravity-based estimates against field recordings ofactual subsurface water-mass variations. In practice, this could prove difficult because thespatial integral of all water-storage change components can be subject to considerable fieldmeasurement error. An alternative approach to the validation process is proposed by whichsuitable geological formations are utilized as giant weighing devices to directly measure area-integratedwater-mass changes. The existence of such natural geological weighing lysimetersis demonstrated using observations from a replicated experimental site in New Zealand. Sitesof this type could be used to verify water-storage change estimates derived from sensitiveground surface gravity instrumentation. In addition, geological lysimeters could be used tomake local checks on the accuracy of any estimated regional water-mass time series, whichis proposed for satellite calibration. The land area weighed by a geological lysimeter increaseswith formation depth and it is speculated that recordings made at oil well depth may allowdirect monitoring of subsurface water mass changes at the regional scale.     

Enigmatic Efflorescence in Kärkevagge, Swedish Lapland: The Key to Chemical Weathering?

The second marvel to catch the eye of the visitor to Kärkevagge, after the impressive boulder deposit on the floor of the valley, is the series of prominent white stripes running down the valley's dark cliffs. Streams and springs descending the eastern flank of Kärkevagge are marked by the presence of whitish coatings on the black rock surfaces and on cobbles lining ephemeral waterways. These were referred to as 'lime crusts' by early investigators, but they are not reactive to HCl. We believe that they are a precipitate resulting from acid attack on the local rocks. Pyrite is common in many of the rocks in the valley and its oxidation produces sulfuric acid. As the dissolved mineral elements are carried in the drainage water, efflorescence forms on the surfaces where the water flows due to evaporation or to changes in temperature. The exact mineralogy of the white crusts is unknown, but the crusts are dominated by Al, S, and O, and in some cases by Ca, depending on the substrate and local conditions. Gypsum, illite, and chlorite have been identified by X–ray diffraction of some scrapings of white–coated rocks. However, we believe that some unidentified oxy–hydroxy aluminum sulfates make up the bulk of the precipitates.     

Depth of the base of the Jackson aquifer, based on geophysical exploration, southern Jackson Hole, Wyoming, USA

 A geophysical survey was conducted to determine the depth of the base of the water-table aquifer in the southern part of Jackson Hole, Wyoming, USA. Audio-magnetotellurics (AMT) measurements at 77 sites in the study area yielded electrical-resistivity logs of the subsurface, and these were used to infer lithologic changes with depth. A 100–600 ohm-m geoelectric layer, designated the Jackson aquifer, was used to represent surficial saturated, unconsolidated deposits of Quaternary age. The median depth of the base of the Jackson aquifer is estimated to be 200 ft (61 m), based on 62 sites that had sufficient resistivity data. AMT-measured values were kriged to predict the depth to the base of the aquifer throughout the southern part of Jackson Hole. Contour maps of the kriging predictions indicate that the depth of the base of the Jackson aquifer is shallow in the central part of the study area near the East and West Gros Ventre Buttes, deeper in the west near the Teton fault system, and shallow at the southern edge of Jackson Hole. Predicted, contoured depths range from 100 ft (30 m) in the south, near the confluences of Spring Creek and Flat Creek with the Snake River, to 700 ft (210 m) in the west, near the town of Wilson, Wyoming. Received, May 1997 · Revised, February 1998 · Accepted, April 1998     

GPS monitoring of vertical ground motion in northern Ardenne–Eifel: five campaigns (1999–2003) of the HARD project

We present the HARD project of GPS monitoring of vertical ground motion in NE Ardenne and Eifel (western Europe). Its main purposes are to get a better insight into the present-day rates of vertical ground motion in intraplate settings and to identify the various causes of these motions. Since 1999, we have carried out yearly campaigns of simultaneous GPS measurements at 12 sites situated so as to sample the different tectonic subunits of the study area and especially to record potential displacements across the seismogenic Hockai fault zone. Five campaigns (1999–2003) have been processed currently. Key issues of the data processing with the Gamit software are discussed and first results are presented. Though temporally consistent in many cases, the obtained vertical motion rates are spatially highly variable. They are also much too high (several mm/year) to support a tectonic interpretation, and a long-term influence of groundwater level variations is proposed to account for the observed motions. This influence should be distinguished from seasonal variations and from inter-survey variations linked to the varying degree of soil and subsoil drying off during the successive spring surveys.     

Origin and evolution of the Steamboat Springs siliceous sinter deposit, Nevada, U.S.A.

Siliceous hot spring deposits from Steamboat Springs, Nevada, U.S.A., record a complex interplay of multiple, changing, primary environmental conditions, fluid overprinting and diagenesis. Consequently these deposits reflect dynamic geologic and geothermal processes. Two surface sinters were examined—the high terrace, and the distal apron-slope, as well as 13.11 m (43 ft) of core material from drill hole SNLG 87-29. The high terrace sinter consists of vitreous and massive-mottled silica horizons, while the distal deposit and core comprise dominantly porous, indurated fragmental sinters. Collectively, the three sinter deposits archive a complete sequence of silica phase diagenetic minerals from opal-A to quartz. X-ray powder diffraction analyses and infrared spectroscopy of the sinters indicate that the distal apron-slope consists of opal-A and opal-A/CT mineralogy; the core yielded opal-A/CT and opal-CT with minor opal-A; and the high terrace constitutes opal-C, moganite, and quartz. Mineralogical maturation of the deposit produced alternating nano–micro–nano-sized silica particle changes. Based on filament diameters of microbial fossils preserved within the sinter, discharging thermal outflows fluctuated between low-temperatures (< 35 °C, coarse filaments) and mid-temperatures ( 35–60 °C, fine filaments). Despite transformation to quartz, primary coarse and fine filaments were preserved in the high terrace sinter. AMS ¹⁴C dating of pollen from three horizons within core SNLG 87-29, from depths of 8.13 to 8.21 m (26′8″ to 26′11″), 10.13 to 10.21 m (33′3″ to 33′6″), and 14.81 to 14.88 m (48′7″ to 48′10″), yielded dates of 8684 ± 64 years, 11,493 ± 70 years and 6283 ±60 years, respectively. In the upper section of the core, the stratigraphically out-of-sequence age likely reflects physical mixing of younger sinter with quartzose sinter fragments derived from the high terrace. Within single horizons, mineralogical and morphological components of the sinter matrix were spatially patchy. Overall, the deposit was modified by sub-surface flow of alkali-chloride thermal fluids depositing a second generation of silica, and periodically, by acidic steam condensate formed during periods when the water table was low. Local faulting produced considerable fracturing of the sinter. Hence, the Steamboat Springs sinter experienced a complex history of primary and secondary hydrothermal, geologic and diagenetic events, and their inter-relationships and effects are locked within the physical, chemical and biological signatures of the deposit.     

The evolution of the mantle''s chemical structure

The geochemistry of flood basalts and their associated picrites, and of komatiites and their associated basalts, combined with a theoretical model for the structure of mantle starting plumes, can be used to decipher key elements of the geochemical structure of the deep mantle and show how it has varied through time. We argue that the thermal boundary layer above the core consisted mainly of depleted mantle similar to the present MORB source during the Archaean and this was largely replaced between 2.7 and 2.0 billion years ago by enriched mantle to form the OIB source. We suggest that this change in the nature of the hotspot source reflects a fundamental change in the dominant component of downward convection: from cold plumes breaking away from beneath a stable lithosphere during the pre-Archaean to subduction of lithosphere in the Archaean and post-Archaean mantles.     

Geological and thermochronological studies of the Dashui gold deposit, West Qinling Orogen, Central China

The Dashui gold deposit is a structurally controlled, Carlin-type gold deposit hosted by recrystallised limestone in the West Qinling Orogen of Central China. The major, structurally late east-trending Dashui Fault forms the hanging wall to the gold mineralisation at the Dashui mine and defines the contact between Middle Triassic limestone and a steeply dipping overlying succession of Middle Triassic argillaceous limestone, dolomite, and sandstone. Multiple carbonate veins and large-scale supergene enrichment, represented by hematite, goethite, limonite and jarosite, characterise the deposit. Detailed geochronological investigation using zircon SHRIMP U-Pb dating reveals that volcanic rocks closely associated with the Dashui gold deposit were synchronous with the Ge’erkuohe Granite and pre-date mineralisation. The igneous dyke sample from the hanging wall has the same U-Pb zircon age as the footwall, ca. 213 Ma. (U-Th)/He thermochronology on dykes in the hanging wall and footwall of the Dashui Fault yields identical (U-Th)/He zircon ages of ca. 210 Ma but distinct (U-Th)/He apatite ages of ca. 136 and 211 Ma, respectively. Therefore, the hanging wall and footwall are interpreted as having distinct post-mineralisation exhumation histories. Reverse fault movement exhumed the hanging wall ~2 to 4 km since the Late Triassic with the main component of faulting taking place between the Late Triassic and Early Cretaceous. These relationships suggest a Late Triassic to Early Cretaceous age for the primary gold mineralisation at the Dashui gold deposit, with the corollary that any ‘missing portion’ of the deposit, previously hypothesised to exist in the hanging wall of the Dashui Fault, has been eroded away. The mineralisation in the footwall may have been supergene enriched soon after the primary mineralisation was emplaced, because it has been located at shallow depth since the Late Triassic. Semi-quantitative results obtained in this study also constrain the maximum depth of formation of the Dashui gold at no more than 2 km.     

A tubular-coring device for use in biogeochemical sampling of succulent and pulpy plants

A hand-operated, tubular-coring device developed for use in biogeochemical sampling of succulent and pulpy plants is described. The sampler weighs about 500 g (1.1 lb); and if 25 × 175 mm (1 × 7 in) screw-top test tubes are used as sample containers, the complete sampling equipment kit is easily portable, having both moderate bulk and weight.