Telescoped porphyry Cu-Mo-Au mineralisation, advanced argillic alteration and quartz-sulphide-gold-anhydrite veins in the Thames District, New Zealand

Porphyry Cu-Mo-Au mineralisation with associated potassic and phyllic alteration, an advanced argillic alteration cap and epithermal quartz-sulphide-gold-anhydrite veins, are telescoped within a vertical interval of 400-800 m on the northeastern margin of the Thames district, New Zealand. The geological setting is Jurassic greywacke basement overlain by Late Miocene andesitic-dacitic rocks that are extensively altered to propylitic and argillic assemblages. The porphyry Cu-Mo-Au mineralisation is hosted in a dacite porphyry stock and surrounding intrusion breccia. Relicts of a core zone of potassic K-feldspar-magnetite-biotite alteration are overprinted by phyllic quartz-sericite-pyrite or intermediate argillic chlorite-sericite alteration assemblages. Some copper occurs in quartz-magnetite-chlorite-pyrite-chalcopyrite veinlets in the core zone, but the bulk of the copper and the molybdenum are associated with the phyllic alteration as disseminated chalcopyrite and as molybdenite-sericite-carbonate veinlets. The advanced argillic cap has a quartz-alunite-dickite core, which is enveloped by an extensive pyrophyllite-diaspore-dickite-kaolinite assemblage that overlaps with the upper part of the phyllic alteration zone. Later quartz-sphalerite-galena-pyrite-chalcopyrite-gold-anhydrite-carbonate veins occur within and around the margins of the porphyry intrusion, and are associated with widespread illite-carbonate (argillic) alteration. Multiphase fluid inclusions in quartz stockwork veins associated with the potassic alteration trapped a highly saline (50-84 wt% NaCl equiv.) magmatic fluid at high temperatures (450 to >600 °C). These hypersaline brines were probably trapped at a pressure of about 300 bar, corresponding to a depth of 1.2 km under lithostatic conditions. This shallow depth is consistent with textures of the host dacite porphyry and reconstruction of the volcanic stratigraphy. Liquid-rich fluid inclusions in the quartz stockwork veins and quartz phenocrysts trapped a lower salinity (3-20 wt% NaCl equiv.), moderate temperature (300-400 °C) fluid that may have caused the phyllic alteration. Fluid inclusions in the quartz-sphalerite-galena-pyrite-chalcopyrite-gold-anhydrite-carbonate veins trapped dilute (1-3 wt% NaCl equiv.) fluids at 250 to 320 °C, at a minimum depth of 1.0 km under hydrostatic conditions. Oxygen isotopic compositions of the fluids that deposited the quartz stockwork veins fall within the 6 to 10‰ range of magmatic waters, whereas the quartz-sulphide-gold-anhydrite veins have lower '¹⁸O_water values (-0.6 to 0.5‰), reflecting a local meteoric water (-6‰) influence. A '¹⁸O versus 'D plot shows a trend from magmatic water in the quartz stockwork veins to a near meteoric water composition in kaolinite from the advanced argillic alteration. Data points for pyrophyllite and the quartz-sulphide-gold-anhydrite veins lie about midway between the magmatic and meteoric water end-member compositions. The spatial association between porphyry Cu-Mo-Au mineralisation, advanced argillic alteration and quartz-sulphide-gold-anhydrite veins suggests that they are all genetically part of the same hydrothermal system. This is consistent with K-Ar dates of 11.6-10.7 Ma for the intrusive porphyry, for alunite in the advanced argillic alteration, and for sericite selvages from quartz-gold veins in the Thames district.     

Coarse carbonate breccias as a result of water-wave cyclic loading (uppermost Jurassic – South-East Basin, France)

In the uppermost Jurassic of the central part of the South-East Basin of France, an association of lime mudstone beds, calcarenite beds and coarse carbonate breccia bodies form an informal stratigraphical unit called the 'Barre Tithonique'. In the 'Barre Tithonique', gradual transitions from lime mudstone or calcarenite to breccia show different stages of deformation leading to progressive brecciation of the original lithologies. The study of the breccia facies, and the observed gradual transitions as a whole, document a new early diagenetic process in carbonate environments, resulting from water-wave and seabed interaction. Water-wave induced brecciation and its abundance in the 'Barre Tithonique' indicate that sea–seabed interaction was significant. Comparison with modern studies of the mechanics of wave–seabed interaction suggests that water depth was less than 200 m. It is demonstrated that sedimentary features such as channel-like structures, previously interpreted as being the result of erosion and deposition of mud-flows, were in fact produced by wave-induced, in situ reworking of lime mud, without any significant unidirectional flow or gravity induced displacement.     

Horizontal and Vertical Co2 Advection In A Sloping Forest

A system measuring the horizontal and vertical advection was devised and installed in a sloping forest at the Vielsalm site, Belgium. The measurements showed that under stable conditions a flow regime established below the canopy: air flowed horizontally along the slope and entrained the air above the canopy vertically. This movement occurs during stable nights characterised by strongly negative net radiation. It creates negative air concentration gradients in both the vertical and horizontal directions. The advection fluxes associated with these movements are opposite and of a similar order of magnitude. This implies that the horizontal advection cannot be ignored in the carbon budget equation at night. Unfortunately, the large variability of, and considerable uncertainty about, advection fluxes does not enable one to produce estimates of the source term from these equations. Advection measurement systems should be improved in order to enable such estimates to be made. Particular attention should be paid to the estimation of the vertical velocity above the canopy and to the vertical profiles of the horizontal velocity and horizontal CO₂ gradient below the canopy.     

Modelling metolachlor exports in subsurface drainage water from two structured soils under maize (eastern France)

The study investigated the processes involved in metolachlor transport in two artificially drained, structured soils in eastern France. Measured losses of bromide and metolachlor in drainage water were compared with results simulated by the mechanistic, stochastic AgriFlux model. Simulated drainage water volumes were generally similar to the measured volumes when the spatial variability of the soil water properties was taken into account. When such variability was disregarded, cumulative water volumes of the clay soil were over- or underestimated by more than 20%. Two types of adsorption were tested. For instantaneous, reversible adsorption, using the partition coefficient Koc, metolachlor losses were underestimated in the first drainage water volumes and overestimated for the total study period. The use of slow adsorption and desorption kinetics (ADK) produced an export pattern similar to the observed one. A sensitivity analysis indicated that the simulated results are very sensitive to the values of the ADK rates, especially for the silty loam soil. The effect of ADK on the attenuation of metolachlor exports was more significant than the effect of degradation (2.3 and 6.7 times higher for the clay and silty loam soils, respectively). For the same four-month period, the bromide and metolachlor losses (using ADK) in the clay soil were 2.1 and 1.3 times greater, respectively, if the macroporosity was set at 10% than if it was not simulated. Conversely, macroporosity did not significantly affect these losses in the silty loam. The main factors involved in the metolachlor transport in the studied soils were: (i) the macroporosity, especially in the clay soil because of the low hydraulic conductivity of the matrix and (ii) the sorption kinetics rates which varied according to the soil physico-chemical characteristics.     

Testing etching hypothesis for the shaping of granite dome structures beneath lateritic weathering landsurfaces using ERT method

An Erratum has been published for this article in Earth Surface Processes and Landforms 28(13) 2003, 1491. Granite domes, boulders and knobs buried within saprolite have been detected beneath lateritic weathering landsurfaces using 2D electrical resistivity tomography (ERT). This technique provides a valuable means of mapping the bedrock topography and the regolith structures underneath landsurfaces, as it is intrinsically very sensitive to the electrical properties of superimposed pedological, hydrological and geological layers, allowing the determination of their relative geometry and spatial relationships. For instance, 2D inverse electrical resistivity models including topographic data permit the de?nition of lithostratigraphic cross‐sections. It shows that resistive layers, such as the more or less hardened ferruginous horizons and/or the bedrock, are generally well differentiated from poorly resistive layers, such as saprolite, including water‐saturated lenses, as has been corroborated by past and actual borehole observations. The analysis of the 2D geometrical relations between the weathering front, i.e. the bedrock topography, and the erosion surface, i.e. the landsurface topography, documents the weathering and erosion processes governing the development of the landforms and the underlying structures, thus allowing the etching hypothesis to be tested. The in?ltration waters are diverted by bedrock protrusions, which behave as structural thresholds compartmentalizing the saprolite domain, and also the regolith water table, into distinct perched saturated subdomains. The diverted waters are thus accumulated in bedrock troughs, which behave like underground channels where the saprolite production rate may be enhanced, provided that the water drainage is ef?cient. If the landsurface topography controls the runoff dynamics, the actual bedrock topography as depicted by ERT imaging in?uences the hydrodynamics beneath the landsurface. In some way, this may control the actual weathering rate and the shaping of bedrock protrusions as granite domes and knobs within thick saprolite, before their eventual future exposure. Copyright © 2003 John Wiley & Sons, Ltd.     

The LATEA metacraton (Central Hoggar, Tuareg shield, Algeria): behaviour of an old passive margin during the Pan-African orogeny

Historically, the Tuareg shield is divided into three parts bordered by mega-shear zones with the centre, the Central Polycyclic Hoggar, characterized by Archaean and Palaeoproterozoic lithologies. Nearly 10 years ago, the Tuareg shield was shown to be composed of 23 displaced terranes [Geology 22 (1994) 641] whose relationships were deciphered in Aïr to the SE [Precambr. Res. 67 (1994) 59]. The Polycyclic Central Hoggar terranes were characterized by the presence of well preserved Archaean/Palaeoproterozoic and Neoproterozoic lithologies.We show here that the terranes from Central Hoggar (Laouni, Azrou-n-Fad, Tefedest, Egéré-Aleksod) belonged to a single old passive margin, to which we gave the acronym name LATEA, which behaved as a craton during the Mesoproterozoic and the Early-Middle Neoproterozoic but was partly destabilized and dissected during the Late Neoproterozoic as a consequence of its involvement as a passive margin in the Pan-African orogen.An early Pan-African phase consisted of thrust sheets including garnet-bearing lithologies (eclogite, amphibolite, gneiss) that can be mapped and correlated in three LATEA terranes. In the Tin Begane area, P–T–t paths have been established from>15 kbar––790 °C (eclogite) to 4 kbar––500 °C (greenschist retrogression) through 12 kbar––830 °C (garnet amphibolite) and 8 kbar––700 °C (garnet gneiss), corresponding to the retrograde path of a Franciscan-type loop. Sm–Nd geochronology on minerals and laser ablation ICP-MS on garnet show the mobility of REE, particularly LREE, during the retrograde greenschist facies that affects, although slightly, some of these rocks. The amphibolite-facies metamorphism has been dated at 685 ± 19 Ma and the greenschist facies at 522 ± 27 Ma. During the thrust phase, the Archaean–Palaeoproterozoic basement was only locally affected by the Pan-African tectonics. LATEA behaved as a craton. Other juvenile terranes were also thrust early onto LATEA: the Iskel island arc at ≈850 Ma to the west of LATEA, the Serouenout terrane in the 700–620 Ma age range to the east. No subduction-related magmas have intruded LATEA during this epoch, which behaved as a passive margin.During the main Pan-African phase (625–580 Ma), LATEA was dissected by mega-shear zones that induced several hundreds km of relative displacement and allowed the emplacement of high-K calc-alkaline batholiths. Smaller movements continued till 525 Ma, accompanied by the emplacement of subcircular plutons with alkaline affinity. Here is dated the Ounane granodiorite (624 ± 15 Ma; ⁸⁷Sr/⁸⁶Sr_i=0.70839 ± 0.00016; 6WR, MSWD=0.87) and the Tisselliline granite (552 ± 15 Ma; ⁸⁷Sr/⁸⁶Sr_i=0.7074 ± 0.0001; 5WR, MSWD=1.4). Nd isotopes indicate a preponderant Palaeoproterozoic crustal source for these two plutons: _Nd=−14 to −21 at 624 Ma and T_DM=1650–2320 Ma for Ounane and _Nd=−13 to −15 at 555 Ma and T_DM=1550–1720 Ma for Tisselliline. Our model links these intrusions to a linear lithospheric delamination along mega-shear zones, allowing the hot asthenosphere to rise, melt by adiabatic pressure release and inducing the melting of the Palaeoproterozoic and Archaean lower crust.The LATEA cratonic microcontinent remained however sufficiently rigid to preserve Archaean and Palaeoproterozoic lithologies as well as Middle Neoproterozoic oceanic thrust sheets. This corresponds to the notion of metacraton [J. African Earth Sci. 34 (2002) 119], i.e. a craton that has been remobilized during an orogenic event but is still recognizable dominantly through its rheological, geochronological, isotopic and sometimes petrological characteristics.     

Les consommations d'énergie dans le monde : une méthode robuste de prévision de leur évolution à moyen terme ; premières conséquences

This document proposes some ideas on the global energy context in an anthropogenic view: what are the needs in energy for the world population? How could they be satisfied in the middle term? What links exist with the near future of a necessarily limited system, the ‘Earth Surface, oceans and atmosphere’ system? Over past 30 years, the world individual energy consumption has been a constant. This is the basis of a robust method for predicting, in the short and middle term, the relative part of the main energy vectors and their interactions with the carbon cycle. Finally, some essential aspects of any energy planning are pointed out. To cite this article: M. Combarnous, A. Prieur, C. R. Geoscience 335 (2003).     

Analysis of the karst aquifer structure of the Lamalou area (Hérault, France) with ground penetrating radar

The study site at Lamalou karst spring (Hortus karst plateau) is situated 40 km north of Montpellier in France. It consists of a limestone plateau, drained by a karst conduit discharging as a spring. This conduit extends for a few dozen meters in fractured and karstified limestone rocks, 15 to 70 m below the surface. The conduit is accessible from the surface. The main goal of this study is to analyze the surface part of the karst and to highlight the karstic features and among them the conduit, and to test the performances of ground penetrating radar (GPR) in a karstic environment. This method thus appears particularly well adapted to the analysis of the near-surface (<30 m in depth) structure of a karst, especially when clayey coating or soil that absorbs and attenuates the radar is rare and discontinuous. A GPR pulseEKKO 100 (Sensors and Software) was used on the site with a 50-MHz antenna frequency. The results highlight structures characterizing the karstic environment: the epikarst, bedding planes, fractured and karstified zones, compact and massive rock and karrens, a typical karst landform. One of the sections revealed in detail the main conduit located at a depth of 20 m, and made it possible to determine its geometry. This site offers possibilities of validation of the GPR data by giving direct access to the karstic conduits and through two cored boreholes. These direct observations confirm the interpretation of all the GPR sections.     

Neoformation of Ni phyllosilicate upon Ni uptake on montmorillonite: A kinetics study by powder and polarized extended X-ray absorption fine structure spectroscopy

Wet chemistry kinetics and powder and polarized extended X-ray absorption fine structure (EXAFS and P-EXAFS) spectroscopy were combined to investigate the mechanism of Ni uptake on montmorillonite, at pH 8, high ionic strength (0.2 M Ca(NO₃)₂), initial Ni concentration of 660 μM, and solid concentration of 5.3 g/L. Approximately 20% of Ni sorbed within the first 24 h; thereafter, the Ni uptake rate slowed, and 12% of the initial Ni concentration remained in solution after 206 d of reaction time. Powder EXAFS spectra collected on wet pastes at 1, 14, 90, and 206 d showed the presence of Ni-Ni pairs at ∼3.08 Å in an amount that gradually increased with time. Results were interpreted by the nucleation of a Ni phase having either an α-Ni-hydroxide- or a Ni-phyllosilicate-like local structure. The latter possibility was confirmed by recording P-EXAFS spectra of a highly textured, self-supporting montmorillonite film prepared in the same conditions as the wet samples and equilibrated for 14 d. The orientation distribution of the c*-axes of individual clay particles off the film plane, as measured by quantitative texture analysis, was 32.8° full width at half maximum, and this value was used to correct from texture effect the effective numbers of Ni and Si nearest neighbors determined by P-EXAFS. Ni atoms were found to be surrounded by 2.6 ± 0.5 Ni atoms at 3.08 Å in the in-plane direction and by 4.2 ± 0.5 Si atoms at 3.26 Å in the out-of-plane direction. These structural parameters, but also the orientation and angular dependence of the Ni and Si shells, strongly support the formation of a Ni phyllosilicate having its layers parallel to the montmorillonite layers. The neoformation of a phyllosilicate on metal uptake on montmorillonite, documented herein for the first time, has important geochemical implications because this dioctahedral smectite is overwhelmingly present in the environment. The resulting sequestration of sorbed trace metals in sparingly soluble phyllosilicate structure may durably decrease their migration and bioavailability at the Earth’s surface and near surface.