EARTH CRUST INVESTIGATION USING CONVERTED WAVES*

The conditions for creating and recording converted waves in the area of the Panonien basin are considered. Comparison between the characteristics of converted waves recorded in the field and characteristics of converted waves calculated for the model which approximately corresponds to lithophysical conditions of the area is made. The comparative interpretation of the crustal structure along the profile, using different types of waves, is given.     

河南省内黄县河流地质考古研究

河流地质考古学是基于地层研究河流和考古遗址之间关系的学科。近年来我们在河南省内黄县开展的河流地质考古研究揭示了黄河复杂的演化历史,在此基础上进一步探讨了古代人类活动与周围环境的相互作用。本文主要介绍了2010~2016年我们在河南省内黄县3个全新世遗址（岸上、三杨庄和大张龙村）的地质考古工作中所取得的成果。研究区域内遗址的地层记录表明,许多考古遗址被深埋于地下,并可能影响了3000 a B.P.以来的河流沉积过程。我们在岸上遗址发掘了A、B、C、D共4处青铜时代的沟渠遗迹,这些沟渠的堆筑可能影响了后期的沉积过程并导致了遗址周边微地貌的改变;在三杨庄遗址识别出了多层不同时期的人为古土壤,包括新石器晚期、战国时期、汉代和唐代;在大张龙村发现了北宋时期黄河泛滥沉积物,其沉积过程可能受周边村落遗址的影响。根据测得的14C年代和沉积层厚度,本研究进一步对这3处遗址的沉积速率进行了估算,并与前人对华北平原沉积速率的相关研究进行了对比。结果表明,这3处遗址所显示的沉积速率自3000 a B.P.开始显著增加,与对早期历史时期黄河河道沉积速率的估算结果相吻合。因此,基于遗址的地质考古研究能够为探索人与环境的互动关系提供大量信息。未来的工作中,我们需要开展更多基于考古遗址的河流地质考古研究,以深入探讨华北平原的自然沉积过程与文明演进过程之间的关系。

     

南海张裂过程及其对晚中生代以来东南亚构造的启示——IODP建议书735-Full介绍

南海的形成揭示了大陆边缘张裂和盆地形成的复杂模式,尽管已经进行了广泛研究,但是关于基底岩石和深海盆沉积层的精确年代数据还很缺乏,这使得对南海张裂年代的估计存在很大的误差,对张裂机制和历史的各种假设没有得到验证.同时只有对南海的张裂过程有了精确地分析与刻画,才能更好地理解西太平洋边缘海盆地的形成以及它们在印支块体受印度-欧亚板块碰撞而向东南挤出、青藏高原隆升中可能起到的作用.2009年正式提交的国际综合大洋钻探计划(IODP)建议书735-Full建议在南海深海盆内的4个站位上实施钻探.这4个站位分布在南海盆地4个不同的次级构造单元上(南海东北部、西北次海盆、东部次海盆和西南次海盆),这样的站位设计会确保完成本建议书的整体研究目标,即揭示南海的张裂历史和它对晚中生代以来东南亚构造的启示.位于南海盆地最东北部的站位有助于确定该区域地壳的属性和验证古南海是否存在,位于西北次海盆的站住可能会提供南海的最早张裂年代,另外2个分别位于东部次海盆和西南次海盆的站位将重点确定2个次海盆的绝对年龄、基底矿物成分与磁化率以及2个次海盆的相对张裂次序.这些站位的水深大约在2 910～4 400 m,钻探深度预计到海底以下大约700～2 200 m,总的钻透深度为5 959 m,其中5 359 m穿透沉积层,另外600 m或400 m钻入基底.所有这些站位的位置是由已有的地球物理观测数据所确定,目前计划收集更多的地质与地球物理数据以满足IODP对井位调查数据的要求.     

Assessing regional‐scale spatio‐temporal patterns of groundwater–surface water interactions using a coupled SWAT‐MODFLOW model

Interaction between groundwater and surface water in watersheds has significant impacts on water management and water rights, nutrient loading from aquifers to streams, and in‐stream flow requirements for aquatic species. Of particular importance are the spatial patterns of these interactions. This study explores the spatio‐temporal patterns of groundwater discharge to a river system in a semi‐arid region, with methods applied to the Sprague River Watershed (4100 km²) within the Upper Klamath Basin in Oregon, USA. Patterns of groundwater–surface water interaction are explored throughout the watershed during the 1970–2003 time period using a coupled SWAT‐MODFLOW model tested against streamflow, groundwater level and field‐estimated reach‐specific groundwater discharge rates. Daily time steps and coupling are used, with groundwater discharge rates calculated for each model computational point along the stream. Model results also are averaged by month and by year to determine seasonal and decadal trends in groundwater discharge rates. Results show high spatial variability in groundwater discharge, with several locations showing no groundwater/surface water interaction. Average annual groundwater discharge is 20.5 m³/s, with maximum and minimum rates occurring in September–October and March–April, respectively. Annual average rates increase by approximately 0.02 m³/s per year over the 34‐year period, negligible compared with the average annual rate, although 70% of the stream network experiences an increase in groundwater discharge rate between 1970 and 2003. Results can assist with water management, identifying potential locations of heavy nutrient mass loading from the aquifer to streams and ecological assessment and planning focused on locations of high groundwater discharge. Copyright © 2016 John Wiley & Sons, Ltd.     

Fracture mechanics analysis of multiple cracks in anisotropic media

This paper presents a single‐domain boundary element method (BEM) for linear elastic fracture mechanics analysis in the two‐dimensional anisotropic material. In this formulation, the displacement integral equation is collocated on the un‐cracked boundary only, and the traction integral equation is collocated on one side of the crack surface only. A special crack‐tip element was introduced to capture exactly the crack‐tip behavior. A computer program with the FORTRAN language has been developed to effectively calculate the stress intensity factors of an anisotropic material. This BEM program has been verified having a good accuracy with the previous researches. Furthermore, by analyzing the different anisotropic degree cracks in a finite plate, we found that the stress intensity factors of crack tips had apparent influence by the geometry forms of cracks and media with different anisotropic degrees. Copyright © 2010 John Wiley & Sons, Ltd.     

A multiphase approach for evaluating the horizontal and rocking impedances of pile group foundations

This paper advocates the use of a multiphase model, already developed for static or quasi‐static geotechnical engineering problems, for simulating the behaviour of piled raft foundations subject to horizontal as well as rocking dynamic solicitations. It is shown that such a model, implemented in a FEM code, yields appropriate predictions for the foundation impedance characteristics, provided that shear and bending effects in the piles are taken into account, thus corroborating the findings of the asymptotic homogenization theory. Besides, it is notably pointed out that such a multiphase‐based computational tool makes it possible to assess the dynamic behaviour of pile groups in a much quicker way than when using direct numerical simulations, which may face oversized problems when large pile groups are concerned. Copyright © 2016 John Wiley & Sons, Ltd.     

Fluid generation and evolution during exhumation of deeply subducted UHP continental crust: Petrogenesis of composite granite–quartz veins in the Sulu belt,China

Composite granite–quartz veins occur in retrogressed ultrahigh pressure (UHP) eclogite enclosed in gneiss at General's Hill in the central Sulu belt, eastern China. The granite in the veins has a high‐pressure (HP) mineral assemblage of dominantly quartz+phengite+allanite/epidote+garnet that yields pressures of 2.5–2.1 GPa (Si‐in‐phengite barometry) and temperatures of 850–780°C (Ti‐in‐zircon thermometry) at 2.5 GPa (~20°C lower at 2.1 GPa). Zircon overgrowths on inherited cores and new grains of zircon from both components of the composite veins crystallized at c. 221 Ma. This age overlaps the timing of HP retrograde recrystallization dated at 225–215 Ma from multiple localities in the Sulu belt, consistent with the HP conditions retrieved from the granite. The ε_Hf(t) values of new zircon from both components of the composite veins and the Sr–Nd isotope compositions of the granite consistently lie between values for gneiss and eclogite, whereas δ¹⁸O values of new zircon are similar in the veins and the crustal rocks. These data are consistent with zircon growth from a blended fluid generated internally within the gneiss and the eclogite, without any ingress of fluid from an external source. However, at the peak metamorphic pressure, which could have reached 7 GPa, the rocks were likely fluid absent. During initial exhumation under UHP conditions, exsolution of H₂O from nominally anhydrous minerals generated a grain boundary supercritical fluid in both gneiss and eclogite. As exhumation progressed, the volume of fluid increased allowing it to migrate by diffusing porous flow from grain boundaries into channels and drain from the dominant gneiss through the subordinate eclogite. This produced a blended fluid intermediate in its isotope composition between the two end‐members, as recorded by the composite veins. During exhumation from UHP (coesite) eclogite to HP (quartz) eclogite facies conditions, the supercritical fluid evolved by dissolution of the silicate mineral matrix, becoming increasingly solute‐rich, more ‘granitic’ and more viscous until it became trapped. As crystallization began by diffusive loss of H₂O to the host eclogite concomitant with ongoing exhumation of the crust, the trapped supercritical fluid intersected the solvus for the granite–H₂O system, allowing phase separation and formation of the composite granite–quartz veins. Subsequently, during the transition from HP eclogite to amphibolite facies conditions, minor phengite breakdown melting is recorded in both the granite and the gneiss by K‐feldspar+plagioclase+biotite aggregates located around phengite and by K‐feldspar veinlets along grain boundaries. Phase equilibria modelling of the granite indicates that this late‐stage melting records P–T conditions towards the end of the exhumation, with the subsolidus assemblage yielding 0.7–1.1 GPa at <670°C. Thus, the composite granite–quartz veins represent a rare example of a natural system recording how the fluid phase evolved during exhumation of continental crust. The successive availability of different fluid phases attending retrograde metamorphism from UHP eclogite to amphibolite facies conditions will affect the transport of trace elements through the continental crust and the role of these fluids as metasomatic agents interacting with the mantle wedge in the subduction channel.