A new concept of a hull form to improve wave response characteristics for marine construction barges

The object of the new hull form is to provide a single hull which possesses long natural periods of roll and heave and has substantially reduced motion response amplitudes in very high sea states. Model tests and preliminary estimates indicated that the new hull form can be designed for roll and heave motions nearly equivalent to those of much larger semisubmersible units.All existing conventional marine construction barges have rectangular cross section hull. The new hull form consists of a system of upper side tanks and lower side tanks added onto a rectangular cross section hull. The upper tanks and lower tanks form longitudinal troughs on the port and starboard sides. Structural grillage of any open type is to connect the upper and lower tanks at the side of the vessel. Figure 1 indicates a profile and a typical transverse section of the new hull form. The new hull comprises the concept of reduced water plane area which is turn results in low transverse metacentric height and low tons per in. immersion. The novel features of combining low GM_T and low TPI with extremely heavy damping and added mass of the entrained water characteristics result in very long natural periods of roll and heave and considerably small rolling and heaving amplitudes in high sea states. The open side shell plating on the side of the vessel functions to dissipate wave energy at the side of the vessel which would have otherwise been transmitted to the vessel and caused the vessel to respond. This paper presents the conceptual foundation and outline of the new hull form. Model test results are presented and implemented. Also presented is the design philosophy.     

Concentrations of unsubstituted polynuclear aromatic hydrocarbons in bay mussels (Mytilus edulis) from Oregon, USA

Concentrations of fifteen unsubstituted polynuclear aromatic hydrocarbons (PNAH) were measured in Mytilus edulis from two sites in Yaquina Bay, Oregon, USA, during 1979–1980. There were significant differences in PNAH levels between the two populations. The average total concentration in mussels inhabiting the more industrialized bayfront was 986·2 μg/kg compared with 273·9 μg/kg in mussels from a more remote site across the bay. Substantial differences were found in the concentrations of different PNAH in M. edulis examined during this study. The smaller more water soluble, compounds were concentrated to one or two orders of magnitude above the larger, less soluble PNAH.     

Zinc speciation in the Northeastern Atlantic Ocean

Measurements of zinc and zinc complexation by natural organic ligands in the northeastern part of the Atlantic Ocean were made using cathodic stripping voltammetry with ligand competition. Total zinc concentrations ranged from 0.3 nM in surface waters to 2 nM at 2000 m for open-ocean waters, whilst nearer the English coast, zinc concentrations reached 1.5 nM in the upper water column. In open-ocean waters zinc speciation was dominated by complexation to a natural organic ligand with conditional stability constant (log K_ZnL′) ranging between 10.0 and 10.5 and with ligand concentrations ranging between 0.4 and 2.5 nM. The ligand was found to be uniformly distributed throughout the water column even though zinc concentrations increased with depth. Organic ligand concentrations measured in this study are similar to those published for the North Pacific. However the log K_ZnL′ values for the North Atlantic are almost and order of magnitude lower than those reported by Bruland [Bruland, K.W., 1989. Complexation of zinc by natural organic-ligands in the central North Pacific. Limnol. Oceanogr., 34, 269–285.] using anodic stripping voltammetry for the North Pacific. Free zinc ion concentrations were low in open-ocean waters (6–20 pM) but are not low enough to limit growth of a typical oceanic species of phytoplankton.     

Particulate flux in the water column overlying Santa Monica Basin

Fluxes of particulate carbon, nitrogen, phytoplankton pigments, biogenic silica and dry mass were measured using free-floating and moored sediment trap arrays in the Santa Monica Basin during the period from October 1985 to August 1990 as part of the California Basin Study (CaBS) Program. In field testing for potential sources of sediment trap biases, we found little significant or consistent difference in rate estimates between short-term drifting traps and long-term moored traps, between preserved and unpreserved traps in short-term experiments, between different preservatives (mercury or formalin) in long-term experiments, between different designs of small cylindrical traps, and between deep-moored cylindrical traps and large conical traps. We did, however, find that sediment trap samples collected and analyzed on 0.45 μm silver filters gave estimates of carbon and nitrogen fluxes about 25% higher than samples collected on GF/F glass-fiber filters. Concurrent trap deployments at two stations 18km apart revealed low mesoscale variability in flux estimates. Seasonal patterns in carbon and nitrogen flux were not evident in our data, but strong seasonality, with spring maxima and summer minima, were observed for fluxes of phaeopigments and biogenic silica out of the euphotic zone.Time-averaged rates of particulate flux for long-term trap deployments from January to August 1990, were 121, 18.8, 1.5, 67 and 633mg m⁻²d⁻¹ at 110–135m for carbon, nitrogen, phaeopigment, biogenic silica and mass, respectively. Flux estimates to the basin floor (835–860m) were 50, 6.5, 0.64, 41.6 and 575mg m⁻²d⁻¹ for the same parameters. The former estimates are constrained by and in good agreement with independent assessments of new production from nitrate uptake in the euphotic zone. The latter agree with rates previously inferred from the sedimentary record using ²¹⁰Pb as a tracer. In addition, the difference in carbon estimates in the water column between the euphotic zone and the basin floor is consistent with the requirements for bacterial growth and metabolism at intermediate depths as measured by the thymidine method.     

Sonographs of submarine sediment failure caused by the 1980 earthquake off northern California

In 1980, a large earthquake caused extensive sediment failure on the shallow continental shelf off the Klamath River in northern California. Side-scan sonography was used to complement detailed geophysical profiling in identifying specific features and resolving modes of failure. The features include a nearly flat failure terrace mantled with sand boils, collapse craters and sediment flows, and bounded on the seaward side by a meandering continuous toe ridge. Seaward of the terrace lies a compression zone delineated by small pressure ridges. Our findings indicate a temporal progression of failure from lique-faction of shallow subsurface sand to lateral spread of intact blocks to sediment collapse and flow.