Flexural deformation controls on Late Quaternary sediment dispersal in the Garo-Rajmahal Gap,NW Bengal Basin

Subsurface deformation is a driver for river path selection when deformation rates become comparable to the autogenic mobility rate of rivers. Here we combine geomorphology, soil and sediment facies analyses, and geophysical data of the Late Quaternary sediments of the central Garo-Rajmahal Gap in Northwest Bengal to link subsurface deformation with surface processes. We show variable sedimentation characteristics, from slow rates (<0.8 mm/year) in the Tista megafan at the foot of the Himalaya to nondeposition at the exposed surface of the Barind Tract to the south, enabling the development of mature soils. Combined subsidence in the Tista fan and uplift of the Barind Tract are consistent with a N-S flexural response of the Indian plate to loading of the Himalaya Mountains given a low value of elastic thickness (15–25 km). Provenance analysis based on bulk strontium concentration suggests a dispersal of sediment consistent with this flexural deformation—in particular the abandonment of the Barind Tract by a Pleistocene Brahmaputra River and the current extents of the Tista megafan lobes. Overall, these results highlight the control by deeply rooted deformation patterns on the routing of sediment by large rivers in foreland settings.     

Macrofauna Communities in the Eastern Mediterranean Deep Sea

Abstract. During two expeditions with RV ‘Meteor’ in summer 1993 and winter 1997/98 the structural and functional diversity of the benthic system of the highly oligotrophic eastern Mediterranean deep sea was investigated. The macrofauna communities were dominated by polychaetes even at the deepest stations. The fauna at shallow stations was dominated by surface deposit feeders, whereas subsurface deposit feeders and predators generally increased with depth. A high percentage of suspension‐feeding Porifera was found in the Levantine Basin. Mean abundance and number of taxa of both expeditions were significantly correlated to depth and distance to the nearest coast as well as to the total organic carbon (TOC) content in sediments. Numbers of taxa and abundance decreased generally with depth, although lowest numbers were not found at the deepest stations but in the extremely oligotrophic Levantine and Ierapetra Basin. Biomass measured during the second cruise was extremely low in the Ierapetra Basin and comparable to other extreme oligotrophic seas. The significant correlations found for TOC contents and macrofauna with distance to coast during both expeditions apparently reflect the role of hydrographically governed transport of organic matter produced in coastal regions into greater and extreme depths of the Mediterranean Sea. Seasonal differences in macrofauna communities due to seasonal differences in food supply were not found. However, recent large‐scale hydrographic changes (Eastern Mediterranean Transient, EMT) might change the oligotrophy and, thus, the structure of the benthic communities in the Eastern Mediterranean deep sea.     

Characterization of chromophoric dissolved organic matter (CDOM) in the Baltic Sea by excitation emission matrix fluorescence spectroscopy

Chromophoric dissolved organic matter (CDOM) is the major light absorber in the Baltic Sea. In this study, excitation emission matrix (EEM) fluorescence spectra and UV–visible absorption spectra of CDOM are reported as a function of salinity. Samples from different locations and over different seasons were collected during four cruises in 2002 and 2003 in the Baltic Sea in both Pomeranian Bay and the Gulf of Gdansk. Absorption by CDOM decreased with increased distance from the riverine source and reached a relatively stable absorption background in the open sea. Regression analysis showed that fluorescence intensity was linearly related to absorption by CDOM at 375 nm and a_CDOM(375) absorption coefficients were inversely related to salinity. Analysis of CDOM-EEM spectra indicated that a change in composition of CDOM occurred along the salinity gradient in the Baltic Sea. Analysis of percent contribution of respective fluorophore groups to the total intensity of EEM spectra indicated that the fluorescence peaks associated with terrestrial humic components of the CDOM and total integrated fluorescence decreased with decreasing CDOM absorption. In contrast, the protein-like fraction of CDOM decreased to a lesser degree than the others. Analysis of the percent contribution of fluorescence peak intensities to the total fluorescence along the salinity gradient showed that the contribution of protein-like fluorophores increased from 2.6% to 5.1% in the high-salinity region of the transect. Fluorescence and absorption changes observed in the Baltic Sea were similar to those observed in similar transects that have been sampled elsewhere, e.g. in European estuaries, Gulf of Mexico, Mid-Atlantic Bight and the Cape Fear River plume in the South Atlantic Bight, although the changes in the Baltic Sea occurred over a much smaller salinity gradient.     

Census survey approach to quantifying īnanga spawning habitat for conservation and management

Here, we describe a methodology for quantifying the spawning habitat of īnanga (Galaxias maculatus), a protected native fish species. Our approach is demonstrated with a survey of the Heathcote/ōpāwaho following the Canterbury earthquakes that produced unexpected findings. Spawning habitat was detected over a 2.5?km reach and the area occupied by spawning sites (75m²) was much larger than in previous records (ca.?21m²). Sites dominated by the invasive Phalaris arundinaceae were found to support high egg numbers. Spawning has not previously been recorded on this species and it is identified in the literature as a threat to spawning habitat. Considerable spatio-temporal variation was also detected in the location of spawning sites and pattern of egg production. Together, these aspects illustrate the need for a comprehensive survey methodology to reliably quantify spawning habitat. The Heathcote/ōpāwaho example shows the utility of our census approach for achieving this, and supporting habitat conservation objectives.     

Statistical landslide susceptibility assessment in a dynamic environment: A case study for Lanzhou City,Gansu Province,NW China

This study presents a statistical landslide susceptibility assessment (LSA) in a dynamic environment. The study area is located in the eastern part of Lanzhou, NW China. The Lanzhou area has exhibited rapid urbanization rates over the past decade associated with greening, continuous land use change, and geomorphic reshaping activities. To consider the dynamics of the environment in the LSA, multitemporal data for landslide inventories and the corresponding causal factors were collected. The weights of evidence (WofE) method was used to perform the LSA. Three time stamps, i.e., 2000, 2012, and 2016, were selected to assess the state of landslide susceptibility over time. The results show a clear evolution of the landslide susceptibility patterns that was mainly governed by anthropogenic activities directed toward generating safer building grounds for civil infrastructure. The low and very low susceptibility areas increased by approximately 10% between 2000 and 2016. At the same time, areas of medium, high and very high susceptibility zones decreased proportionally. Based on the results, an approach to design the statistical LSA under dynamic conditions is proposed, the issues and limitations of this approach are also discussed. The study shows that under dynamic conditions, the requirements for data quantity and quality increase significantly. A dynamic environment requires greater effort to estimate the causal relations between the landslides and controlling factors as well as for model validation.     

Carbonaceous chondrites as analogs for the composition and alteration of Ceres

The mineralogy and geochemistry of Ceres, as constrained by Dawn's instruments, are broadly consistent with a carbonaceous chondrite (CM/CI) bulk composition. Differences explainable by Ceres’s more advanced alteration include the formation of Mg‐rich serpentine and ammoniated clay; a greater proportion of carbonate and lesser organic matter; amounts of magnetite, sulfide, and carbon that could act as spectral darkening agents; and partial fractionation of water ice and silicates in the interior and regolith. Ceres is not spectrally unique, but is similar to a few other C‐class asteroids, which may also have suffered extensive alteration. All these bodies are among the largest carbonaceous chondrite asteroids, and they orbit in the same part of the Main Belt. Thus, the degree of alteration is apparently related to the size of the body. Although the ammonia now incorporated into clay likely condensed in the outer nebula, we cannot presently determine whether Ceres itself formed in the outer solar system and migrated inward or was assembled within the Main Belt, along with other carbonaceous chondrite bodies.     

The frequency of window damage caused by bolide airbursts: A quarter century case study

We have empirically estimated how often fireball shocks produce overpressure (∆P) at the ground sufficient to damage windows. Our study used a numerical entry model to estimate the energy deposition and shock production for a suite of 23 energetic fireballs reported by U.S. Government sensors over the last quarter century. For each of these events, we estimated the peak ∆P on the ground and the ground area above ∆P thresholds of 200 and 500 Pa where light and heavy window damage, respectively, are expected. Our results suggest that at the highest ∆P, it is the rare, large fireballs (such as the Chelyabinsk fireball) which dominate the long-term areal ground footprints for heavy window damage. The height at the fireball peak brightness and the fireball entry angle contribute to the variance in ground ∆P, with lower heights and shallower angles producing larger ground footprints and more potential damage. The effective threshold energy for fireballs to produce heavy window damage is ~5–10 kT; such fireballs occur globally once every 1–2 years. These largest annual bolide events, should they occur over a major urban center with large numbers of windows, can be expected to produce economically significant window damage. However, the mean frequency of heavy window damage (∆P above 500 Pa) from fireball shock waves occurring over urban areas is estimated to be approximately once every 5000 yr. Light window damage (∆P above 200 Pa) is expected every ~600 yr.     

Experimental impact cratering: A summary of the major results of the MEMIN research unit

This paper reviews major findings of the Multidisciplinary Experimental and Modeling Impact Crater Research Network (MEMIN). MEMIN is a consortium, funded from 2009 till 2017 by the German Research Foundation, and is aimed at investigating impact cratering processes by experimental and modeling approaches. The vision of this network has been to comprehensively quantify impact processes by conducting a strictly controlled experimental campaign at the laboratory scale, together with a multidisciplinary analytical approach. Central to MEMIN has been the use of powerful two-stage light-gas accelerators capable of producing impact craters in the decimeter size range in solid rocks that allowed detailed spatial analyses of petrophysical, structural, and geochemical changes in target rocks and ejecta. In addition, explosive setups, membrane-driven diamond anvil cells, as well as laser irradiation and split Hopkinson pressure bar technologies have been used to study the response of minerals and rocks to shock and dynamic loading as well as high-temperature conditions. We used Seeberger sandstone, Taunus quartzite, Carrara marble, and Weibern tuff as major target rock types. In concert with the experiments we conducted mesoscale numerical simulations of shock wave propagation in heterogeneous rocks resolving the complex response of grains and pores to compressive, shear, and tensile loading and macroscale modeling of crater formation and fracturing. Major results comprise (1) projectile–target interaction, (2) various aspects of shock metamorphism with special focus on low shock pressures and effects of target porosity and water saturation, (3) crater morphologies and cratering efficiencies in various nonporous and porous lithologies, (4) in situ target damage, (5) ejecta dynamics, and (6) geophysical survey of experimental craters.     

Creating an isotopically similar Earth–Moon system with correct angular momentum from a giant impact

The giant impact hypothesis is the dominant theory explaining the formation of our Moon. However, the inability to produce an isotopically similar Earth–Moon system with correct angular momentum has cast a shadow on its validity. Computer-generated impacts have been successful in producing virtual systems that possess many of the observed physical properties. However, addressing the isotopic similarities between the Earth and Moon coupled with correct angular momentum has proven to be challenging. Equilibration and evection resonance have been proposed as means of reconciling the models. In the summer of 2013, the Royal Society called a meeting solely to discuss the formation of the Moon. In this meeting, evection resonance and equilibration were both questioned as viable means of removing the deficiencies from giant impact models. The main concerns were that models were multi-staged and too complex. We present here initial impact conditions that produce an isotopically similar Earth–Moon system with correct angular momentum. This is done in a single-staged simulation. The initial parameters are straightforward and the results evolve solely from the impact. This was accomplished by colliding two roughly half-Earth-sized impactors, rotating in approximately the same plane in a high-energy, off-centered impact, where both impactors spin into the collision.