TNOs are Cool: A Survey of the Transneptunian Region

Over one thousand objects have so far been discovered orbiting beyond Neptune. These trans-Neptunian objects (TNOs) represent the primitive remnants of the planetesimal disk from which the planets formed and are perhaps analogous to the unseen dust parent-bodies in debris disks observed around other main-sequence stars. The dynamical and physical properties of these bodies provide unique and important constraints on formation and evolution models of the Solar System. While the dynamical architecture in this region (also known as the Kuiper Belt) is becoming relatively clear, the physical properties of the objects are still largely unexplored. In particular, fundamental parameters such as size, albedo, density and thermal properties are difficult to measure. Measurements of thermal emission, which peaks at far-IR wavelengths, offer the best means available to determine the physical properties. While Spitzer has provided some results, notably revealing a large albedo diversity in this population, the increased sensitivity of Herschel and its superior wavelength coverage should permit profound advances in the field. Within our accepted project we propose to perform radiometric measurements of 139 objects, including 25 known multiple systems. When combined with measurements of the dust population beyond Neptune (e.g. from the New Horizons mission to Pluto), our results will provide a benchmark for understanding the Solar debris disk, and extra-solar ones as well.     

The Use of Small Telescopes for Spectral Imaging of Low-light-level Extended Atmospheres in the Solar System

A 10-cm aperture telescope equipped with coronagraphic capabilities, using occulting masks of various size and material, has been developed to obtain low-light-level, wide-angle (~7^o FOV), narrow-band filtered images of sodium exospheres at Io, the Moon and Mercury. Here we describe new instrument capabilities and recent findings about the extraordinarily long tails of sodium gas discovered in the lunar and hermean exospheres. Spatial and temporal variability patterns captured in such images can be used to study changes in surface sputtering processes and radiation pressure acceleration effects in the inner solar system.     

Dissolution of olivine during natural weathering

Naturally weathered olivine occurring as phenocrysts in Hawai’ian volcanic rocks from several volcanic centers and regolith/outcrop settings, and as tectonized olivines from several metadunite bodies in the southern Appalachian Blue Ridge, are all similarly corroded by natural weathering. Conical (funnel-shaped) etch pits occur as individual pits, base-to-base pairs of cone-shaped pits, or en echelon arrays. Etch-pit shapes and orientations in the smallest etch-pit arrays visible in conventional scanning electron microscopy resemble even smaller features previously reported from transmission electron microscope investigations of olivine weathering. Etch pits occur in samples with chemical and/or mineralogical evidence of weathering, and/or are associated with, or proximal or directly connected to, fractures or exposed outcrop surface, and therefore are formed by weathering and not inherited from pre-weathering aqueous alteration (e.g., serpentinization, iddingsitization) of these parent rocks. Many etch pits are devoid of weathering products. Natural weathering of olivine is surface-reaction-limited. Similarity of corrosion forms from naturally weathered olivine from multiple igneous and metamorphic parent-rock bodies suggests that olivine weathers in the same manner regardless of its specific crystallization/recrystallization history, eruption/weathering/exposure ages of the olivine’s host rock, and the local regolith history.     

Subduction Influence on Oxygen Fugacity and Trace and Volatile Elements in Basalts Across the Cascade Volcanic Arc

Fluids or melts derived from a subducting plate are often citedas a mechanism for the oxidation of arc magmas. What remainsunclear is the link between the fluid, oxygen fugacity, andother major and trace components, as well as the spatial distributionof the impact of those fluids. To test the potential effectsof addition of a subduction-derived fluid or melt to the sub-arcmantle, olivine-hosted melt inclusions from primitive basalticlavas sampled from across the central Oregon Cascades (43°–45°N)have been analyzed for major, trace and volatile elements andfO₂. Oxygen fugacity was determined in melt inclusions fromsulfur speciation determined by electron microprobe and fromolivine–chromite oxygen geobarometry. The overall rangein fO₂ based on sulfur speciation measurements is from <–0·25log units to + 1·9 log units (FMQ, where FMQ is fayalite–magnetite–quartzbuffer). Oxygen fugacity is positively correlated with fluid-mobiletrace element and light rare earth element contents in basaltsgenerated by relatively low-degree partial melting. Establishinga further correlation between fO₂ and fluid-mobile trace elementabundances with position along the arc requires the basaltsto be subdivided into shoshonitic, calc-alkaline, low-K tholeiiteand enriched intraplate basalt groups. Melt inclusions fromenriched intraplate and shoshonitic lavas show increasing fO₂and trace element abundances closer to the trench, whereas calc-alkalinemelt inclusions exhibit no significant across-arc variations.Low-K tholeiitic melt inclusions record an increase in incompatibletrace elements closer to the trench; however, there is no correlatedincrease in fO₂. The correlation observed in enriched intraplateand shoshonitic melt inclusions is interpreted to reflect aprogressively greater proportion of a fluid-rich, oxidized subductioncomponent in magmas generated nearer the subduction zone. Significantly,calc-alkaline melt inclusions with high ratios of large ionlithophile elements to high field strength elements, characteristicof ‘typical’ arc magmas, have oxidation states indistinguishablefrom low-K tholeiite and enriched intraplate basalt melt inclusions.The lack of across-arc geochemical variation in calc-alkalinemelt inclusions may suggest that these basalts are not necessarilythe most appropriate magmas for examining recent addition ofa subduction component to the sub-arc mantle. Flux and batchmelt model results produce a wide range of predicted amountsof melting and subduction component added to the mantle source;however, general trends characterized by increased melting andproportion of the subduction component from enriched intraplate,to low-K tholeiite, to calc-alkaline are robust. The model resultsdo not require enriched intraplate, low-K tholeiite and calc-alkalinemagmas to be produced from the same more fertile mantle source.However, enriched intraplate magmas, in contrast to calc-alkalineand low-K tholeiite magmas, cannot be generated from a depletedmantle source. Flux or batch melting of either the more fertileor depleted mantle sources used to generate the low-K tholeiite,calc-alkaline, and enriched intraplate magmas cannot reproduceshoshonitic compositions, which require a significantly depletedmantle source strongly metasomatized by a subduction component.The potential mantle source for shoshonitic basalts has a predictedfO₂ (after oxidation) from + 0·3 to + 2·4 logunits (FMQ) whereas the mantle source for low-K tholeiite, calc-alkaline,and enriched intraplate magmas may range from –1·1to + 0·7 log units (FMQ). KEY WORDS: basalt; Cascades; melt inclusions; oxidation state; volatiles     

Wind-driven estuarine turbidity maxima in Mandovi Estuary,central west coast of India

Systematic studies on the suspended particulate matter (SPM) measured on a seasonal cycle in the Mandovi Estuary, Goa indicate that the average concentrations of SPM at the regular station are ∼20mg/l, 5mg/l, 19mg/l and 5mg/l for June–September, October–January, February–April and May, respectively. SPM exhibits low-to-moderate correlation with rainfall indicating that SPM is also influenced by other processes. Transect stations reveal that the SPM at sea-end stations of the estuary are at least two orders of magnitude greater than those at the river-end during the monsoon. Estuarine turbidity maximum (ETM) of nearly similar magnitude occurs at the same location in two periods, interrupted by a period with very low SPM concentrations. The ETM occurring in June–September is associated with low salinities; its formation is attributed to the interactions between strong southwesterly winds (5.1–5.6ms⁻¹) and wind-induced waves and tidal currents and, dominant easterly river flow at the mouth of the estuary. The ETM occurring in February–April is associated with high salinity and is conspicuous. The strong NW and SW winds (3.2–3.7ms⁻¹) and wind-driven waves and currents seem to have acted effectively at the mouth of the estuary in developing turbidity maximum. The impact of sea breeze appears nearly same as that of trade winds and cannot be underestimated in sediment resuspension and deposition     

Diurnal variation of electron density in Saturn’s ionosphere: Model comparisons with Saturn Electrostatic Discharge (SED) observations

Using the Saturn Thermosphere Ionosphere Model (STIM), we present a study of the diurnal variation of electron density, with a focus on comparisons with peak electron densities (N_MAX) inferred from the low-frequency cutoff of radio emission due to lightning in the lower atmosphere, called Saturn Electrostatic Discharges (SEDs). It is demonstrated that photochemistry in Saturn’s ionosphere cannot reproduce the SED-inferred diurnal variation in N_MAX unless additional production and loss sources outside of the current best estimates are considered. Additional explanations of the SED-inferred diurnal variation of N_MAX are presented and analyzed, such as the possibility that the low-frequency cutoff seen in SEDs is due to the presence of sharp low-altitude layers of plasma, as frequently seen in radio occultation measurements. Finally, we outline the observational constraints that must be fulfilled by any candidate explanations of the SED-inferred diurnal variation of N_MAX.     

Aerial electromagnetic sounding of the lithosphere of Venus

Electromagnetic (EM) investigation depths are larger on Venus than Earth due to the dearth of water in rocks, in spite of higher temperatures. Whistlers detected by Venus Express proved that lightning is present, so the Schumann resonances ～10–40 Hz may provide a global source of electromagnetic energy that penetrates ～10–100 km. Electrical conductivity will be sensitive at these depths to temperature structure and hence thermal lithospheric thickness. Using 1D analytic and 2D numerical models, we demonstrate that the Schumann resonances—transverse EM waves in the ground-ionosphere waveguide—remain sensitive at all altitudes to the properties of the boundaries. This is in marked contrast to other EM methods in which sensitivity to the ground falls off sharply with altitude. We develop a 1D analytical model for aerial EM sounding that treats the electrical properties of the subsurface (thermal gradient, water content, and presence of conductive crust) and ionosphere, and the effects of both random errors and biases that can influence the measurements. We initially consider specified 1D lithospheric thicknesses 100–500 km, but we turn to 2D convection models with Newtonian temperature-dependent viscosity to provide representative vertical and lateral temperature variations. We invert for the conductivity-depth structure and then temperature gradient. For a dry Venus, we find that the error on temperature gradient obtained from any single local measurement is ～100%—perhaps enough to distinguish “thick” vs. “thin” lithospheres. When averaging over thousands of kilometers, however, the standard deviation of the recovered thermal gradient is within the natural variability of the convection models, <25%. A “wet” interior (hundreds of ppm H₂O) limits EM sounding depths using the Schumann resonances to <20 km, and errors are too large to estimate lithospheric properties. A 30-km conductive crust has little influence on the dry-interior models because the Schumann penetration depths are significantly larger. We conclude that EM sounding of the interior of Venus is feasible from a 55-km high balloon. Lithospheric thickness can be measured if the upper-mantle water content is low. If H₂O at hundreds of ppm is present, the deeper, temperature-sensitive structure is screened, but the “wet” nature of the upper mantle, as well as structure of the upper crust, is revealed.