Crystallization processes in an artificial magma: variations in crystal shape,growth rate and composition with melt cooling history

A large (4.8 m³, 1.3x10⁷ g) artificial mafic melt with a bulk composition similar to that of a basalt (but with a high CaO content of 17 wt%) was generated during a demonstration of in situ vitrification and was allowed to cool naturally. During the melting process, convection was vigorous, resulting in a chemically and thermally homogeneous melt body. Once heating was complete, the cooling rate was rapid with the temperature dropping from 1500°C to 500°C in 6 days within the interior of the 3 m diameter, 1.5 m thick body. A 20 h period of constant temperature (1140°C) observed during colling was the result of latent heat released by widespread crystallization. The final crystalline assemblage consists of diopsidic to hedenbergitic pyroxene and anorthitic feldspar, with a subordinate amount of potassic feldspar, plus a small amount of evolved glass. The compositions and proportions of phases agree well with those predicted by the MELTS thermodynamic model. Thermal and textural evidence suggest that convection within the melt ceased coincident with formation of the first crystals. Textural investigation of core samples reveals large (up to 1 cm in length) acicular diopsidic pyroxenes in a matrix of smaller feldspar and zoned pyroxene crystals (500 m in length). Crystal shape and pyroxene composition vary as a function of position within the solidified body, as a function of cooling rate. Both crystal size and degree of crystallinity are highest in the central, most slowly-cooled parts of the rock. Crystal shape is characterized by tabular, equilibrium-growth forms in the slowly-cooled areas, grading to highly skeletal, dendritic forms at the rapidly-cooled edges of the body. The pyroxene crystals are dominantly homogeneous diopside, but crystals are characterized by thin Fe-rich hedenbergitic rims. These rims were deposited when Mg in the melt was depleted by diopside growth, and melt temperature had cooled sufficiently to allow Fe-rich pyroxene growth. Crystal growth rates can be calculated based on thermal behavior of the melt, reinforced by thermodynamic modelling, and are determined to be between 10^-7 and 10^-8 cm/s in the central part of the melt. These estimates agree well with growth rates in natural systems with similar cooling rates. Pyroxene crystals that formed at a higher cooling rates are characterized by higher Al and lower Mg contents relative to tabular equilibrium crystalline forms, presumably as a result of disequilibrium melt compositions at the crystal-melt interface.New Mexico Bureau of Mines and Mineral Resources, New Mexico Institute of Mining and Technology, Socorro, NM 87801, USA     

Uranus: Disk structure within the 7300-Å methane band

Orthogonal narrow-band (100 Å) photoelectric slit scan photometry of Uranus has been used to infer the basic two-dimensional structure of the disk within the 7300-Å methane band. Numerical image reconstruction and restoration techniques have been applied to quantitatively estimate the degrees of polar and limb brightening on the planet. Through partial removal of atmospheric smearing, an effective spatial resolution of approximately 0.9 arcsec has been achieved. Peak polar, limb, and central intensities on the disk are in the respective proportions 3:2:1. In addition, the bright polar feature is displaced from the geometric pole towards the equator of the planet.     

A tidal theory for the origin of the solar nebula

There are two angular momentum (AM) problems associated with the formation of stars in general and the solar system in particular. The first is how to dispose of the AM possessed by turbulent protostellar clouds. Two-dimensional calculations of the gravitational infall of rotating gas clouds by several authors now indicate that stars are formed in groups or clusters rather than as single entities. Added evidence comes from observation of probable regions of star formation and young clusters, plus the fact that most stars are presently members of binaries or other multiples. Thus the first problem is solved by postulating the fragmentation of massive clouds with most of the AM ending up in the relative orbits. These clusters are notoriously unstable and evolve with the ejection of single stars like the Sun.The second problem is the uneven distribution of AM with mass in the solar system. It turns out that the collapse time for the majority of the infalling material is comparable to the time necessary for significant dynamical interaction of the protostellar fragment with its neighbors. It is found here through calculations utilizing very simplified numerical models that the last few tens of percent of infalling material can easily have sufficient AM transferred to it by the tidal action of passing protostars to form a solar nebula and ensure alignment of the solar spin. The most important parameter is the degree of central condensation: fragments without several tenthsM in a central core tend to be torn apart by encounters, or at least stimulated into binary fission. A stabilizing central mass maintains its identity and acquires a rotating envelope of material.Paper presented at the Conference on Protostars and Planets, held at the Planetary Science Institute, University of Arizona, Tucson, Arizona, between January 3 and 7, 1978.     

Auroral recombination of N and O: A possible source for emission in the γ and δ bands of NO

Radiative recombination of N and O provides a significant source for auroral emission in the γ and δ bands of NO with selective population of vibrational levels in the A²Σ⁺ and C²Π states. This mechanism may account for emissions detected near 2150 Å. Models are derived for the auroral ionosphere and include estimates for the concentrations of N and NO. The concentration of NO is estimated to have a value of about 10⁸ cm^?1 near 140 km in an IBC III aurora. The corresponding density for N is about 5 × 10⁷cm^?3 and the concentration ratio $\text{NO}{}^{\mathrm{+}}\text{O}{}_2{}^{\mathrm{+}}$ has a value of about 5.5.     

Photochemistry of nitrogen in the Martian atmosphere

Models are developed for the photochemistry of a CO₂H₂ON₂ atmosphere on Mars and estimates are given for the concentrations of N, NO, NO₂, NO₃, N₂O₅, HNO₂, HNO₃, and N₂O as a function of altitude. Nitric oxide is the most abundant form of odd nitrogen, present with a mixing ratio relative to CO₂ of order 10^?8. Deposition rates for nitrite and nitrate minerals could be as large as 3× 10⁵ N equivalent atoms cm^?2 sec^?1 under present conditions and may have been higher in the past.     

Guide and examples for users of the ‘SPACEKAP’ style file

Guide and examples for users of the SPACEKAP style fileBasic instructions     

Spectral-compositional variations in the constituent minerals of mafic and ultramafic assemblages and remote sensing implications

The 0.3–2.6 m reflectance spectra of most mafic and ultramafic assemblages can best be interpreted by considering the spectra as being composed of mafic silicate spectra modified by the presence of opaques, such as ilmenite or magnetite, and plagioclase feldspar. The systematic spectral-compositional relationships for olivine, orthopyroxene, and clinopyroxene have been examined and it has been determined that absorption band wavelength positions are correlated with ferrous iron content. Binary mafic silicate mixtures are generally less well understood, but certain spectral features such as reflectance maxima and minima wavelength positions and absorption band areas can be used to quantify or at least constrain end member abundances and compositions. The addition of opaques to a mafic silicate assemblage lowers overall reflectance and band depths. This differs from the effects of increasing grain size which are to lower overall reflectance but increase band depths. Plagioclase is relatively transparent compared to mafic silicates and must be present in appreciable amounts (tens of percent) to be spectrally detectable. The reflectance spectra of most mafic and ultramafic assemblages are dominated by mafic silicate absorption features and analysis of their spectra on this basis allows constraints to be placed on properties such as end member abundances and compositions.     

Structure of the marine boundary layer over north western Indian Ocean during 1983 summer monsoon

The spatial variability of the structure of the lower troposphere over the northwestern Indian Ocean for the period 12th July to 2nd September, 1983 has been studied using upper air data collected during the first scientific cruise of ORV Sagar Kanya.An analysis of thermodynamic structure and kinematics of the marine boundary layer for different zonal and meridional sections revealed the following features: (a) Temperature and humidity inversions were generally absent over the study area except over a few locations in the western region; (b) Large-scale subsidence was found over the central equatorial Indian Ocean; (c) The convective activity over the western Indian Ocean was found to be moderately suppressed as compared to the eastern region; (d) The zonal and meridional components of winds along the equator and 10° N zonal section exhibited a mirror-image-like distribution.