Compositions,sources and depositional environments of organic matter from the Middle Jurassic clays of Poland

The comprehensive biomarker characteristics from previously undescribed Middle Jurassic clays of Poland are presented. The molecular composition of the organic matter (OM) derived from clays of Aalenian to Callovian age has not changed significantly through time. High relative concentrations of many biomarkers typical for terrestrial material suggest a distinct dominance of OM derived from land plants. Increasing concentrations of C₂₉-diaster-13(17)-enes towards the northern part of the basin indicate an increase in terrestrial input. This terrestrial material would have originated from the enhanced transport of organic matter from land situated at the northern bank of the basin, i.e., the Fennoscandian Shield. The organic matter was deposited in an oxic to suboxic environment, as indicated by relatively low concentrations of C₃₃–C₃₅ homohopanes, moderate to high Pr/Ph ratio values, an absence of compounds characteristic for anoxia and water column stratification, such as isorenieratane, aryl isoprenoids and gammacerane, as well as common benthic fauna and burrows. δ¹⁸O measurements from calcitic rostra of belemnites suggest that the mean value of the Middle Jurassic sea-water temperature of the Polish Basin was 13.1 °C. It is suggested that this mirrored the temperature of the lower water column because belemnites are considered here to be necto-benthic. The organic matter from the Middle Jurassic basin of Poland is immature. This is clearly indicated by a large concentration of biomarkers with the biogenic configurations, such as ββ-hopanes, hop-13(18)-enes, hop-17(21)-enes, diasterenes and sterenes. The identification of preserved, unaltered biomolecules like ferruginol, 6,7-dehydroferruginol and sugiol in Protopodocarpoxylon wood samples from these sediments present particularly strong evidence for the presence of immature OM in the Middle Jurassic sediments. Moreover, the occurrence of these polar diterpenoids is important due to the fact that they are definitely the oldest known natural products detected in geological samples.     

Mars reconnaissance lander: Vehicle and mission design

There is enormous potential for more mobile planetary surface science. This is especially true in the case of Mars because the ability to cross challenge terrain, access areas of higher elevation, visit diverse geological features and perform long traverses of up to 200 km supports the search for past water and life. Vehicles capable of a ballistic ‘hop’ have been proposed on several occasions, but those proposals using in-situ acquired propellants are the most promising for significant planetary exploration. This paper considers a mission concept termed Mars Reconnaissance Lander using such a vehicle. We describe an approach where planetary science requirements that cannot be met by a conventional rover are used to derive vehicle and mission requirements.The performance of the hopper vehicle was assessed by adding estimates of gravity losses and mission mass constraints to recently developed methods. A baseline vehicle with a scientific payload of 16.5 kg and conservatively estimated sub-system masses is predicted to achieve a flight range of 0.97 km. Using a simple consideration of system reliability, the required cumulative range of 200 km could be achieved with a probability of around 80%. Such a range is sufficient to explore geologically diverse terrains. We therefore plot an illustrative traverse in Hypanis Valles/Xanthe Terra, which encounters crater wall sections, periglacial terrain, aqueous sedimentary deposits and a traverse up an ancient fluvial channel. Such a diversity of sites could not be considered with a conventional rover. The Mars Reconnaissance Lander mission and vehicle presents some very significant engineering challenges, but would represent a valuable complement to rovers, static landers and orbital observations.     

Variability and propagation of Labrador Sea Water in the southern subpolar North Atlantic

The variability of two modes of Labrador Sea Water (LSW) (upper and deep Labrador Sea Water) and their respective spreading in the interior North Atlantic Ocean are investigated by means of repeated ship surveys carried out along the zonal WOCE line A2/AR19 located at 43–48°N (1993–2007) and along the GOOS line at about 48–51°N (1997–2002). Hydrographic section data are complemented by temperature, salinity, and velocity time series recorded by two moorings. They have been deployed at the western flank of the Mid-Atlantic Ridge (MAR) in the Newfoundland Basin during 1996–2004. The analysis of hydrographic anomalies at various longitudes points to a gradual eastward propagation of LSW-related signals, which happens on time scales of 3–6 years from the formation region towards the MAR. Interactions of the North Atlantic Current (NAC) with the Deep Western Boundary Current (DWBC) close to Flemish Cap point to the NAC being the main distributor of the different types of LSW into the interior of the Newfoundland Basin. Comparisons between the ship data and the mooring records revealed that the mooring sites are located in a region affected by highly variable flow. The mooring time series demonstrate an elevated level of variability with eddy activity and variability associated with the NAC considerably influencing the LSW signals in this region. Hydrographic data taken from Argo profiles from the vicinity of the mooring sites turned out to mimic quite well the temporal evolution captured by the moorings. There is some indication of occasional southward flow in the LSW layer near the MAR. If this can be considered as a hint to an interior LSW-route, it is at least of minor importance in comparison to the DWBC. It acts as an important supplier for the interior North Atlantic, distributing older and recently formed LSW modes southward along the MAR.     

Harmonization of land-use scenarios for the period 1500�C2100: 600?years of global gridded annual land-use transitions, wood harvest, and resulting secondary lands

In preparation for the fifth Assessment Report (AR5) of the Intergovernmental Panel on Climate Change (IPCC), the international community is developing new advanced Earth System Models (ESMs) to assess the combined effects of human activities (e.g. land use and fossil fuel emissions) on the carbon-climate system. In addition, four Representative Concentration Pathway (RCP) scenarios of the future (2005?C2100) are being provided by four Integrated Assessment Model (IAM) teams to be used as input to the ESMs for future carbon-climate projections (Moss et al. 2010). The diversity of approaches and requirements among IAMs and ESMs for tracking land-use change, along with the dependence of model projections on land-use history, presents a challenge for effectively passing data between these communities and for smoothly transitioning from the historical estimates to future projections. Here, a harmonized set of land-use scenarios are presented that smoothly connects historical reconstructions of land use with future projections, in the format required by ESMs. The land-use harmonization strategy estimates fractional land-use patterns and underlying land-use transitions annually for the time period 1500?C2100 at 0.5°?×?0.5° resolution. Inputs include new gridded historical maps of crop and pasture data from HYDE 3.1 for 1500?C2005, updated estimates of historical national wood harvest and of shifting cultivation, and future information on crop, pasture, and wood harvest from the IAM implementations of the RCPs for the period 2005?C2100. The computational method integrates these multiple data sources, while minimizing differences at the transition between the historical reconstruction ending conditions and IAM initial conditions, and working to preserve the future changes depicted by the IAMs at the grid cell level. This study for the first time harmonizes land-use history data together with future scenario information from multiple IAMs into a single consistent, spatially gridded, set of land-use change scenarios for studies of human impacts on the past, present, and future Earth system.     

Do historical maps show the maximal anthropopressure in the Carpathians?

Many landscapes bear the marks of historical land use. These marks can be the basis for a reconstruction of a historical land use structure as some of them are typical of different types of human activity. The aim of this paper is to determine whether Austrian cadastral maps from the 19 th century present the image of the most transformed environment in the Western Carpathians as a result of agricultural activity. Land use structure and terrain forms were detected based on Austrian cadastral maps from 1848, airborne laser scanning and field studies. In two of the test areas, the percentage of arable fields was higher among the plots with stone mounds than the percentage among the plots without them. In the third test area, the relationship was reversed. Also, lynchets, terraces and stone walls sometimes occur in plots that were not arable fields in 1848. Thus, the Austrian cadastral maps from 1848 could not reflect the maximal range of arable fields in the Carpathians in the 19 th century. However, it is impossible to determine the historical structure of land use precisely. Nevertheless, an inventory of terrain forms can be used to assess land use when historical maps have not preserved or when available maps do not present land use in detail.     

Two-dimensional modeling of fine sediment transport with mixed sediment and consolidation: Application to the Gironde Estuary,France

In order to optimize ship navigation in the macrotidal Gironde Estuary, a recent project funded by the port of Bordeaux aims at better understand and forecast hydrodynamic and fine sediment transport within the estuary. In the framework of this project, a two-dimensional hydro-sedimentary model is built. The model includes hydrodynamic forcings, mixed-sediment transport, and consolidation processes. The harmonic analysis of the astronomical tides reveals a strong distortion of the tidal wave inducing the growth of overtide constituents and the non-significant effect of tide-surge interactions in annual-scale prediction. Depending on hydrological conditions, river discharge can considerably alter the model accuracy due to the migration of the turbidity maximum zone modifying the bottom roughness. Comparison with measurements shows the ability of the model to reproduce suspended-sediment concentrations in the central Estuary. Sensitivity of the model to sediment features has also been discussed in regard of suspended-sediment concentrations and fluid mud deposits. The model will be further coupled with ship squat predictions and a morphodynamic model.     

An Observational Study of Contact Binaries with Large Temperature Differences Between Components

In this paper we investigate a sample of contact eclipsing binary systems, which exhibit a large temperature difference (at least 1000 K) between the components. Considering the effective temperature of the primary star, the systems were divided into three groups. We applied a Monte Carlo method as a more suitable procedure for the search of the system configurations previously known as contact binaries with a large temperature difference and with a negligible value of the filling factor. Using only data presented in the literature, we found that the geometrical configuration of almost all systems from the second group is near-contact rather than contact.     

Morphometric and geological conditions for sediment accumulation in the Udava River,Outer Carpathians,Slovakia

The accumulation of sediment in river channels is a phenomenon that is not only influenced by the channel morphology, but also by the physical and geographical characteristics and the endogenous and exogenous processes taking place in the catchment. This paper presents an analysis of the impact the changes in lithological conditions have on the morphological and morphometric parameters of the Udava River channel and their relation to the channel accumulation forms representative of the river’s longitudinal profile as well as of its planform. Results document when accumulation forms occur and what is their spatial distribution within the longitudinal and cross-sectional river profiles. More resistant structures created sections with a lower degree of sedimentation, while in depression segments the degree of sedimentation was higher. With the increase in longitudinal slope, the impact of channel width on the average channel bar size increased. Also a difference in the accumulation was observed between the left and right bank which could be possibly explained by the impact of Coriolis force.