The Effect of pH on Electro-osmotic Flow in Argillaceous Rocks

The use of electro-osmosis in geotechnical engineering has been considered since 1930. Its application has been tested in several sectors like the fight against rising damp in porous materials, the consolidation of soils as well as the remediation of the soils contaminated by oil and heavy metals, etc. The paper presents an experimental study of the electrokinetic phenomena resulting from the application of an electric field to argillaceous sandstones. The electroosmotic tests required the development of a completely new experimental device composed of a confining cell, of a system of measurement and control of the pH of the electrolyte near the electrodes, of a system of control and measurement of the voltage and current at the edges of the sample, and of a system of measurement of inlet (anodic) and outlet (cathodic) flows. Various boundary conditions are considered with and without control of pH. In addition, a micro structural modelling of the electrokinetic phenomena makes it possible to quantify the electro osmotic conductivity with a good agreement with experiments.     

Detailed Study of Three Contiguous Segments of the Mid-Atlantic Ridge,South of the Azores (37° N to 38°30′ N), Using Acoustic Imaging Coupled with Submersible Observations

Using a new tool of seafloor characterisation (sonar images from FARA-SIGMA cruise; Needham et al., 1992), coupled with submersible observations (DIVA1 cruise) we compare, at different scales of observation, three contiguous segments of the Mid-Atlantic Ridge, South of the Azores Triple Junction, between 37° N and 38°30 N.The two northernmost segments (38°20 N and Menez-Gwen) show unusual morphological features for the MAR; the rift valley is absent and the present-day magmatism is focused on shallow axial volcanoes. On the third segment (Lucky Strike), the morphology is the one usually found on the MAR. On the Menez-Gwen and 38°20 N segments, volcanic constructional activity can obliterate, during periods of high magmatic supply, the morphology inherited from tectonic activity. The dive results constrain the recent evolution of each segment and show that a temporal variability in volcanic dynamics exists. On the three segments, outcrops of eruptive lavas alternate with large areas of explosive volcanic ejecta. This cycle in volcanic activity is influenced by changes in water depth, both spatially (i.e. between segments) and temporally (i.e. for the same segment through time).Each segment has known a specific history in its accretionary processes with a succession of tectonic and volcanic predominance and changes in its volcanic phases between volcanic ejecta and effusive dynamics.The hydrothermal activity is focused at the central part of each segment and is controlled by the presence of fresh lava and major tectonic features.     

The physical conditions in the BHR71 outflows

Highly-collimated outflows are believed to be the earliest stage in outflow evolution, so their study is essential for understanding the processes driving outflows. The BHR71 Bok globule is known to harbour such a highly-collimated outflow, which is powered by a protostar belonging to a protobinary system. Using the APEX telescope on Chajnantor, we mapped the BHR71 highly-collimated outflow in CO(3-2), and observed several bright points of the outflow in the molecular transitions CO(4-3), CO(7-6), ¹³CO(3-2), C¹⁸O(3-2), CH₃OH(7-6) and H₂CO(4-3). We use an LVG code to characterise the temperature enhancements in these regions. These observations are particularly interesting for investigating the interaction of collimated outflows with the ambient molecular cloud. In our CO(3-2) map, the second outflow driven by IRS2, which is the second source of the binary system, is completely revealed and shown to be bipolar. We also measure temperature enhancements in the lobes. The CO and methanol LVG modelling points to temperatures between 30 and 50 K in the two lobes. The methanol emission in the southern lobe bright knot is barely resolved with the APEX single-dish. ALMA will thus be a central tool to study the shock chemistry in these regions.     

Le protée est-il équipé pour le magnétotactisme ?

It was suggested that the proteus blind cave salamander can sense the geomagnetic field using magnetic crystals (like magnetite). We attempted to check this hypothesis by measuring the magnetization and the magnetic mineralogy of proteus from the Moulis CNRS underground laboratory. The abdomen and the rear legs of the animals were the unique body parts that revealed a detectable saturation magnetization in the order of 10^?9 A?m². Because this magnetization was carried by magnetite crystals that have the same magnetic properties as the soil sampled in the cave, it is likely that they were ingested by the animals. Thus these experiments did not detect any crystal that would be responsible for magnetotactism. These results are in contrast with those published for the newt [J. Brassart, J.L. Kirschvink, J.B. Phillips, S.C. Borland, Ferromagnetic material in the eastern red-spotted newt, J. Exp. Biol. 202 (1999) 3155]. However the cryogenic magnetometers do not allow us to detect very small amounts of monodomain grains. This prevents us from any definite conclusion until the construction of a very sensitive cryogenic gradiometer. To cite this article: H. Bouquerel, J.-P. Valet, C. R. Geoscience 337 (2005).     

Permian magmatism and metamorphism in the Dent Blanche nappe: constraints from field observations and geochronology

In the Dent Blanche Tectonic System, the Mont Morion biotite-bearing granite is a km-scale intrusion preserved in a low-strain volume. Zircon saturation thermometry suggests that it crystallised from a melt that reached about 800 °C. U–Pb zircon and allanite geochronology indicates crystallization of the magma in the Permian (290 ± 3 Ma; 280 ± 8 Ma, respectively). Migmatitic biotite-gneiss and amphibolite are found as xenoliths within the Mont Morion granite and constitute its country-rocks. In two samples of migmatitic biotite-gneiss zircon has metamorphic overgrowths that yield U–Pb ages of 285 ± 3 Ma and 281 ± 4 Ma, and are thus contemporaneous with the intrusion of the granite. The Mont Morion granite with its country-rocks of migmatitic biotite-bearing gneiss and amphibolite was thus emplaced at middle crustal levels while amphibolite facies metamorphism affected its country rocks. The magmatic and metamorphic record in the Mont Morion area reflects the high-temperature regime and lithospheric thinning of the Adriatic continental margin during Permian.     

Coral- and oyster-microbialite patch reefs in the aftermath of the Triassic–Jurassic biotic crisis (Sinemurian,Southeast France)

The end of the Triassic and the Early Jurassic are intervals characterised by profound biotic and environmental changes, accompanied by dramatic decreases in marine fauna diversity. Corals were strongly affected and assemblages underwent a severe reduction; compared with those of the Upper Triassic, the Early Jurassic is traditionally defined as holding a “reef gap”. A Sinemurian coral-microbialites patch reef, located in southern France in the Hérault department (Le Perthus locality), is here described. This bioconstruction developed in a shallow mixed siliciclastic-carbonate inner ramp setting. The reef volume is composed of up to 70% of an intercoral facies mostly microbialites, with subordinated sediments (approximately 20–30% of the intercoral facies). Therefore, the patch reef can be defined as a coral-microbialite bioconstruction, in which microbialites were the main framebuilders. The coral assemblage has low diversity and is dominated by massive to branching colonies of Chondrocoenia clavellata. This highlights the reef diversity after the T/J boundary crisis. The Le Perthus patch reef could have acted as an edge for the dominant currents and probably induced reductions in hydrodynamic energy and sedimentation on one of its sides. Consequently, it could have triggered the growth of small lateral bioconstructions, composed of oysters and microbialites, uniquely on one of its sides. The evolution of the facies shows that the Le Perthus patch reef grew in a shallowing-upward setting accompanied by an increase in siliciclastic inputs. The rate of bioerosion and the faunal assemblage suggest that the bioconstructions could have been developed in a mesotrophic environment.     

Paleo-fluids characterisation and fluid flow modelling along a regional transect in Northern United Arab Emirates (UAE)

In the Northern Emirates, Jurassic and Lower Cretaceous platform carbonates of the Musandam parautochthonous units are tectonically overlain by siliciclastic units of the Hawasina–Sumeini allochthon, which derive from the former paleo-slope domain and a more distal basinal portion of the Arabian margin of the Tethys, respectively. All these tectonic units display numerous evidences of paleo-fluid circulations, accounting for dolomitisation and recrystallisation of the rock matrix (Musandam Platform units), as well as cementation of fractures. Polymict breccias of Upper Cretaceous Ausaq Formation which underlay the sole thrust of the Hawasina–Sumeini allochthon also record episodes of hydraulic fracturing, whereas fluid inclusion data indicate precipitation at high temperature in relation to paleo-fluid flow. Petrography of thin-sections (conventional and cathodoluminescence microscopic techniques) as well as fluid inclusion and stable isotopes analyses, were combined with micro-tectonic studies. These analytical data document (1) the paragenetic sequence of diagenetic products for the Musandam Platform (which constitutes a carbonate reservoir analogue) and Sumeini units of the Dibba Zone, as well as (2) the nature of the paleo-fluids circulating along fractures and the sole thrust of the Hawasina–Sumeini allochthon. The main results of this petrographic approach are qualitative, evidencing (1) the rapid and vertical transfer of hot fluids in the vicinity of the former slope to platform transition, accounting for episodes of hydrothermal dolomitisation, as well as (2) early (i.e. pre-orogenic) and late (i.e. post-orogenic) episodes of emersion of the carbonate units, accounting for additional interactions with meteoric fluids and karstification. In order to better link these diagenetic events with the overall burial, thermal and kinematic evolution of the Arabian margin, basin modelling with Ceres2D, including fluid flow and pore-fluid pressure modelling, was subsequently performed along a regional transect (D4) located in the vicinity of the samples localities and cross-cutting the Northern Oman Mountains from Dibba in the east up to the Arabian Gulf in the west. New subsurface constraints provided by deep seismic profiles were used to constrain the architecture of the cross-section, and to test various hypotheses on the lateral and vertical connection, timing and hydrodynamic behaviour of the faults. This Ceres basin modelling also provides new quantitative estimates of the paleo-fluid pathways, of the timing and velocities of the fluid transfers and of the evolution of pore-fluid pressures. Ultimately, this integration of petrographic studies on surface samples and coupled kinematic and fluid flow basin modelling provides an updated scenario for the succession of tectonically controlled episodes of fluid rock interactions, namely dolomitisation and karstification recorded in the Mesozoic platform carbonates of the Northern Emirates.     

Gradual diversions of the Rio Pastaza in the Ecuadorian piedmont of the Andes from 1906 to 2008: role of tectonics, alluvial fan aggradation, and ENSO events

The successive courses of the Rio Pastaza in the upper Amazonian Puyo plateau (Ecuador) during the past century have been followed using historical maps, aerial photographs, satellite imagery, topographic and river long profiles, and field studies. The abrupt change in direction of the Rio Pastaza from transverse to longitudinal was a result of two avulsions occurred between 1906 and 1976 at the braided-meandering transition of the former alluvial plain. These avulsions are related to aggradation at the toe of a braided piedmont fan prograding on to a hinterland-dipping topographic slope formed by ongoing tectonic backtilting. The main avulsion proceeded by annexation of a south-dipping depression created in front of the cordillera by backtilting of the plateau. A partial and gradual avulsion having occurred upstream of the former site between 1976 and 2008 is marked by the progressive predominance of a newly formed inner branch. Tectonic backtilting enhanced aggradation upstream of the initial site while it offered the newly avulsed channel a still more favorable way along the cordillera by creating a westward lateral slope. The correlation between ENSO events and the occurrence of the 1976–2008 avulsions strongly suggests that the triggers of the avulsions were the floods caused by the high water and sediment discharges associated with ENSO (La Ni?a) events contrasting with the regular monthly discharge and the lack of actual ‘normal’ floods during the inter-ENSO periods.     

Improvements in Digestion Protocols for Trace Element and Isotope Determinations in Stream and Lake Sediment Reference Materials (JSd-1, JSd-2, JSd-3, JLk-1 and LKSD-1)

Total dissolution is a critical step in geochemical analysis. Despite the number of published protocols, this issue still draws attention for sediment samples, which are particularly difficult to dissolve due to the common occurrence and high abundance of refractory phases such as zircon. We present tests of different chemical digestion procedures carried out on reference materials (RM) of stream (JSd-1, JSd-2 and JSd-3) and lake (JLk-1 and LKSD-1) sediments from the Geological Survey of Japan (GSJ) and the Canadian Certified Reference Material Programme (CCRPM). We demonstrate that the fusion technique is not appropriate for our studies as not all elements of interest were recovered and blank levels were too high to permit further Sr and Pb isotopic composition measurements. Similarly, conventional HF+HNO₃ dissolution methods were not efficient enough for detrital samples. Our preferred method involved using high pressure Teflon® vessel bombs in association with HClO₄. This protocol ensured a complete dissolution of the powder, as well as a complete recovery of trace elements. Moreover, blank levels were sufficiently low that Sr or Pb isotope compositions could be measured from the same mother solution. We also tested the homogeneity of RM powders by performing tests on various amount of powder.