Position-domain integrity risk-based ambiguity validation for the integer bootstrap estimator

Integrity monitoring for ambiguity resolution is of significance for utilizing the high-precision carrier phase differential positioning for safety–critical navigational applications. The integer bootstrap estimator can provide an analytical probability density function, which enables the precise evaluation of the integrity risk for ambiguity validation. In order to monitor the effect of unknown ambiguity bias on the integer bootstrap estimator, the position-domain integrity risk of the integer bootstrapped baseline is evaluated under the complete failure modes by using the worst-case protection principle. Furthermore, a partial ambiguity resolution method is developed in order to satisfy the predefined integrity risk requirement. Static and kinematic experiments are carried out to test the proposed method by comparing with the traditional ratio test method and the protection level-based method. The static experimental result has shown that the proposed method can achieve a significant global availability improvement by 51% at most. The kinematic result reveals that the proposed method obtains the best balance between the positioning accuracy and the continuity performance.     

Geochronology,geochemistry and Hf isotopes of andesites in the Sandaowanzi gold deposit (Great Xing'an Range,NE China): implications for petrogenesis,tectonic setting,and mineralization

Acta Geochimica - The Sandaowanzi gold deposit is an extremely Au-rich deposit in the Northern Great Hinggan Range in recent years. Zircon U–Pb geochronology, Hf isotope analysis, and the...     

Analysis of mobilized stress ratio of gap-graded granular materials in direct shear state considering coarse fraction effect

Weathered rockfill materials, characterized by a mixture of soil matrix and rock aggregates, are widely distributed in mountainous areas. These soils are frequently used for subgrade or riprap in engineering practice, and the mobilized shear strength is crucial for analyzing the displacement and stability of these geo-structures. A series of direct shear tests are performed on a gap-graded soil with a full range of coarse fraction. The behavior of gap-graded soils is analyzed, and a simple model is proposed for the evolution of mobilized stress ratio during direct shearing process based on mixture theory. The change of inter-aggregate configuration is incorporated by introducing a structure variable which increases with coarse fraction and decreases approximately linearly with the overall horizontal shear strain in double logarithmic plot. It reasonably reflects a gradually transformation from a matrix-sustained structure into an aggregate-sustained one with the increase of coarse fraction. The model has four parameters, and at least two direct shear tests need to be done for the calibration. Validation of the model is done by using the test data in this work and those from the literature.

     

基于POGIL理论的地理研学旅行设计研究——以山东省沂河滨河湿地研学为例

研学旅行是中小学开展综合实践活动的重要方式,本文以山东省沂河滨河湿地研学为例,使用“过程取向-指导式探究学习”理论,以问题为导向,提高学生发现问题、解决问题的能力,提高地理实践力。     

基于容器技术的天文应用软件自动部署方法

平方千米阵列即将开始建设,各子工作包也进入关键设计评估阶段。基于云与容器技术是平方千米阵列科学数据处理器未来可能采用的平台技术。针对超大规模海量数据处理面临的天文应用软件快速部署、运行与实测要求,充分考虑天文应用软件运行环境复杂、云计算环境下超大规模计算集群部署困难等问题,系统研究并给出了一种使用容器技术的天文应用软件通用自动部署方法。以目前较为常用的可见度函数校准软件SAGECaL为例,首先分析了SAGECaL的相关特性和分布式部署方面存在的困难,进而给出了基于容器技术的SAGECaL分布式集群的自动部署方法。实验结果表明,自动部署方法极大地提高了SAGECaL分布式集群的部署效率,满足项目组承担平方千米阵列科学数据处理器相关测试工作所需要的基础平台部署与切换等需求,同时也为其它天文软件在云端的快速部署与执行提供了有益的思路。     

Long-term monitoring of the individual self-feeding behavior of rainbow trout Oncorhynchus mykiss

Self-feeding device is extensively used in aquaculture farms, but for salmonids the individual feeding behavior has seldom been continuously observed. In this article, the individual self-feeding behavior of 10 rainbow trout was continuously monitored with a PIT tag record for 50 days with three replicates. The fish fell into three categories according to their feeding behavior, i.e. high triggering fish (trigger behavior more than 25% of the group, HT), low triggering fish (1%–25%, LT) and zero triggering fish (less than 1%). The results showed that in a group of 10 individual 1–2 HT fish accounted for most of the self-feeding behavior (78.19%–89.14%), which was far more than they could consume. The trigger frequency of the fish was significantly correlated with the initial body weight (P <0.01), however, no significant difference in growth rate among the HT, LT, and ZT fish was observed (P >0.05). Cosinor analysis showed that the two HT fish in the same group had similar acrophase. Though some of the HT fish could be active for 50 d, there were also HT fish decreased triggering behavior around 40 d and the high trigger status was then replaced by other fish, which was first discovered in salimonds. Interestingly, the growth of the group was not affected by the alternation triggering fish. These results provide evidence that in the self-feeding system the HT fish didn’t gain much advantage by their frequent self-feeding behavior, and high trigger status of the HT fish is not only an individual character but also driven by the demand of the group. In the self-feeding system, the critical individual should be closely monitored.

     

长江口外海域三维水动力模拟结果及与观测的比较

Base on ECOMSED model, a theree-dimensional hydrodynamic model is developed in the offshore area near the Changjing Estuary in the East China Sea. This model in driven by tide and wind,as well as inflow and outflowcurrents such as Kuroshio,Changjing runoff. The horizontal resolution is 1/20_°. There have 11 layers on the verticaldirection. The numerical results of 4 main constituents of tide(M²,S²,K¹,O¹)and currents are in good agreement with observation data. Compared with 20 gauge stations,the mean absolute erroe between the caluclated M² tidal amplitude and the observed oned is only 6.72cm; the mean absolute error of phased-lag is 5.23_°.For S²,the mean absolute errors of amplitude and phased-lag are 3.67cm and 7.21_°,respectively. The mean absolute errors of amplitude and phased-lag for K¹ are 3.25cm and 6.63_° For O¹,the mean absolute error of calculation and observation is relatively small, amwith observation data measured during Aug., 2006 in the East China Sea.The correlation coeffiients of current between simulation and observation are greater than 0.75 generally. The three-dimensional hydrodynamic model develiped by this paper can well describe the characters of elevation and current in the offshore near the Changjiang Estuary and can be used as hydrodynamic background to simulate the suspend sediment transport in this sea area.     

正理庄高89-1区块CO2混相驱参数优化数值模拟研究

为了确保高89-1区块CO2混相驱项目的顺利实施,依据该区块的精细油藏描述成果,在优化适于CO2混相驱模型基础上,建立了符合油藏地质特点的三维地质模型。在此基础上对开发指标进行计算,对五个参数（井网、开发方式、压力水平、注入量和采油速度）进行优化,并提出了推荐方案,预测采收率可达23.10%,比弹性开采方式提高15.16%。     

Environmental impact of fluidized solidified silt casting on surrounding water bodies

Abstract

With the growing demand for underwater refill engineering, the construction technology of implementing fluidized solidification in underwater pouring has recently received increased attention. However, the environmental impact of underwater casting on surrounding water bodies, especially when the silt is polluted, is still unclear. In this study, a simulated underwater pouring test and a static immersion release test were conducted separately to study the quality of the surrounding water during and after pouring. The results showed that fluidized-solidified silt casting could increase the pH of the surrounding water, even after the pouring had stopped, by approximately 1.0 and the turbidity could reach 200 NTU. No diffusion of Zn and Cu into the surrounding water was observed and while Ni and Cr exhibited slight diffusion, this was at a level well below international water quality standard. During construction, reducing the distance from the seafloor to the bottom of the pouring catheter could reduce the level of pollution. After construction, the use of neutral solidified materials can effectively reduce the pH of the surrounding water and the potential risk of heavy metal dissolution.