Revision of the conchostracan genera Cratostracus and Porostracus from Cretaceous deposits in north-east China

The diagnoses of the conchostracan genera Cratostracus and Porostracus are revised following a re-examination of their type species under a scanning electron microscope. In Cratostracus each growth line has a serrated lower margin. Radial lirae branch into smaller ridges that merge with each other to give the upper part of each growth band in the ventral region of the carapace a slightly undulating surface. Cross-bars are present between these lirae. In Porostracus the radial lirae on the growth bands near the umbo are long and relatively widely spaced. There is a fine reticulum between them in the umbonal part of the carapace and cross-bars on the ventral surface. The ornament of Porostracus indicates that it can be assigned to the family Halysestheriidae rather than to the Afrograptidae, in which it has been placed previously. Morphological analysis of most of the species of the two genera and closely related Orthestheria (Migransia) under the scanning electron microscope is required before their stratigraphic potential can be fully realized.     

1948年川西理塘M7.3地震地表破裂特征及Riedel剪切构造分析

1948年川西理塘M 7.3地震是川滇菱形块体内部近一个世纪以来发生的震级最大的走滑型地震。在对此次同震地表破裂进行详细调查基础上,利用差分GPS对同震地表破裂带进行了精确测量与统计分析。结果揭示该地表破裂的现存长度为36 km,北端始于无量河以北,往东南沿藏坝盆地北东缘、德巫盆地东南缘,延伸至德巫乡北,分为南、北两段,而在交德附近存在约3 km长的地表破裂空区。对同震地表破裂的线密度和同震水平位错量进行分段统计后揭示,此次地震的宏观震中应位于德巫盆地中部交德东南约4～5 km处。对理塘同震地表破裂的Riedel剪切分析结果指示,该破裂带主要由R剪切组成,以发育雁列状排列的挤压鼓包(Push-up)为主要特征,伴有少量R′剪切与T裂缝,缺少P型与X型剪切。其中R剪切占95%以上,其在藏坝段(北段)的优势方向为318°,德巫段(南段)为315°,整条地表破裂带的R剪切平均方向为316°。同时发现,此次地震形成的雁列状挤压鼓包主要以平缓的"弧形"为主,这与1981年道孚M_S 6.9地震和2010年玉树M_S 7.1地震地表破裂带中出现大量反"S"形...     

Application on Floor Water Inrush Evaluation Based on AHP Variation Coefficient Method with GIS

The prediction and prevention of floor water inrush is directly related to the safety of the coal mine production. The previous evaluation method of floor water inrush was more one-sided and lacked main control factors related to mining conditions. In order to evaluate the floor water inrush more accurately, under the project background of geological data of Wanglou coal mine, stope width, mining depth, fault scale index, water pressure, water abundance and thickness of aquifer were selected as main controlling factors of floor water inrush. Combined with the subjective weight analytical hierarchy process and the objective weight variation coefficient method, the weight coefficients corresponding to the main controlling factors were obtained respectively. The thematic map of the risk assessment of coal seam floor water inrush was drawn by combining the constructed comprehensive weight vulnerability index model and geographic information system. The results show that: ① according to the actual geological data of mine, two fault related factors were removed. And stope width and mining depth were increased as the main controlling factors to evaluate floor water inrush. It is easier to compare and calculate the weight of evaluation factors. ② The constructed comprehensive weight vulnerability index model can comprehensively evaluate the risk of floor water inrush. And the results of the evaluation are more accurate. ③ The related thematic maps can directly reflect the risk of floor water inrush, which is of guiding significance for the prediction and prevention of coal seam floor water inrush.     

Energy flux partitioning and evapotranspiration in a sub‐alpine spruce forest ecosystem

In this study, we examined the year 2011 characteristics of energy flux partitioning and evapotranspiration of a sub‐alpine spruce forest underlain by permafrost on the Qinghai–Tibet Plateau (QPT). Energy balance closure on a half‐hourly basis was H + λE = 0.81 × (R_n ? G ? S) + 3.48 (W m^?2) (r² = 0.83, n = 14938), where H, λE, R_n, G and S are the sensible heat, latent heat, net radiation, soil heat and air‐column heat storage fluxes, respectively. Maximum H was higher than maximum λE, and H dominated the energy budget at midday during the whole year, even in summer time. However, the rainfall events significantly affected energy flux partitioning and evapotranspiration. The mean value of evaporative fraction (Λ = λE/(λE + H)) during the growth period on zero precipitation days and non‐zero precipitation days was 0.40 and 0.61, respectively. The mean daily evapotranspiration of this sub‐alpine forest during summer time was 2.56 mm day^?1. The annual evapotranspiration and sublimation was 417 ± 8 mm year^?1, which was very similar to the annual precipitation of 428 mm. Sublimation accounted for 7.1% (30 ± 2 mm year^?1) of annual evapotranspiration and sublimation, indicating that the sublimation is not negligible in the annual water balance in sub‐alpine forests on the QPT. The low values of the Priestley–Taylor coefficient (α) and the very low value of the decoupling coefficient (Ω) during most of the growing season suggested low soil water content and conservative water loss in this sub‐alpine forest. Copyright © 2013 John Wiley & Sons, Ltd.     

Screening level ecological risk assessment for synthetic musks in surface water of Lake Taihu, China

A total of thirty-three surface water samples were collected from Meiliang Bay, Gonghu Bay and Xukou Bay of Lake Taihu, and analyzed for synthetic musks, including 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta-[γ]-2-benzopyrane (HHCB), 7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4-tetrahydronaphthalene (AHTN), 1-tert-butyl-3,5-dimethyl-2,5-dinitro-4-acetylbenzene (MK) and 1-tert-butyl-3,5-dimethyl-2,4,6-trinitrobenzene (MX). Ecological risks of these compounds were characterized by hazard quotient (HQ) method due to a lack of sufficient available toxicity data of synthetic musks. HHCB was the main synthetic musk detected in Lake Taihu, followed by AHTN, MK, and MX. The risk assessment results indicate that low ecological risks were posed by HHCB and total synthetic musks, and even lower risks posed by other synthetic musks in the worst case; much lower ecological risks were caused by both individual and total synthetic musks in the general case. The combined ecological risk from total synthetic musks calculation suggests that the combined ecological risk from all four synthetic musks was expected to be slightly higher than for the individual musks due to their joint action. The HQ spatial distribution maps show that several hot-spot areas were mainly around the river inlets to Lake Taihu, indicating that synthetic musks may be transported to Lake Taihu with municipal sewage and industrial wastewater from surrounding areas. However, the ecological risks in hot-spot areas posed by individual and total synthetic musks were still acceptable.     

An analytical solution for describing the transient temperature distribution in an aquifer thermal energy storage system

A mathematical model is developed for predicting the temperature distribution in an aquifer thermal energy storage (ATES) system, which consists of a confined aquifer bounded from above and below by the rocks of different geological properties. The main transfer processes of heat include the conduction and advection in the aquifer and the conduction in the rocks. The semi‐analytical solution in dimensionless form for the model is developed by Laplace transforms and its corresponding time‐domain solution is evaluated by the modified Crump method. Field geothermal property data are used to simulate the temperature distribution in an ATES system. The results show that the heat transfer in the aquifer is fast and has a vast effect on the vicinity of the wellbore. However, the aquifer temperature decreases with increasing radial and vertical distances. The temperature in the aquifer may be overestimated when ignoring the effect of thermal conductivity. The temperature distribution in an ATES system depends on the vertical thermal conduction in the rocks and the horizontal advection and thermal conduction in the aquifer. The present solution is useful in designing and simulating the heat injection facility in the ATES systems. Copyright © 2010 John Wiley & Sons, Ltd.     

甘肃大地电场的变化特征分析

对甘肃省平凉、松山、古丰、山丹、高台、嘉峪关、瓜州7个台站的地电场分钟值、小时值的日变特征进行了对比,对2012年3月地电场小时值进行了频谱分析,同时结合地磁场H分量、分量应变(固体潮)进行了对比分析。结果表明:1地电场静日的日变化都很明显,呈明显"双峰"和"单谷"形态,并且NS向与EW向变化形态基本相同;各台站同测向及相互之间的自相关系数基本在0.85;不同台站之间同测向的相关系数多数在0.75以上;这是地磁场H分量与固体潮共同影响的结果。2通过频谱分析各台站的优势周期主要以12h和8h为主,但存在差异性,谱值最大相差20倍。3各台站的日变幅也不尽相同,其中,差异性主要表现为与地磁场和固体潮影响量的差异性,并与台站的位置、地质构造、电性结构、浅层电阻率等有很大关系。     

A three-dimensional large-deformation random finite-element study of landslide runout considering spatially varying soil

Landslides - Landslide is a uniquely dynamic large-deformation process that can present serious threat to human lives and infrastructures. The natural soil properties often exhibit inherent spatial...     

Effect of the Dry Ashing Method on Cadmium Isotope Measurements in Soil and Plant Samples

A dry ashing method is commonly used to remove organic material from samples prior to geochemical analysis. In the course of this study, the Cd isotope ratios of a series of soil and plant reference materials and samples were studied to evaluate the effect of the dry ashing method on measurement results of Cd isotope ratios. The samples were pre‐treated using the dry ashing method and high‐pressure bomb for comparison. The results show that the digestion using high‐pressure bombs did not lead to Cd loss, but using the dry ashing method would cause different proportions of Cd loss. The whole range of Cd isotope difference between two methods was from ?0.07‰ to 3.01‰. There was also an obvious difference in measured Cd isotope ratios from the same leaf sample pre‐treated independently by the dry ashing method, indicating that the amount of Cd loss and the effect on Cd isotope measurement during dry ashing is related to the properties of the samples. Therefore, dry ashing may not be appropriate for the removal of organic material in Cd isotope ratio measurement, especially for samples with high organic contents. The δ^114/110Cd values of reference materials NIST SRM 1573a and GSD‐30 are reported for the first time in this study.