上海市长江口及邻近海域地质调查现状及展望

海洋区域地质调查近年来逐渐得到重视,海洋地质调查技术的发展也为开展海洋区域地质调查奠定了基础。上海地区社会经济发展对地质工作的需求,为摸清上海市长江口及邻近海域的地质现状提出了必然要求。本文在系统整理长江口及邻近海域地质资料的基础上,重点分析了区内存在的重点地质问题和研究存在的问题,根据海洋地质调查的技术发展,结合国内相关地区的调查经验,对长江口及邻近海域内区域地质调查进行了展望,提出了采用综合物探技术、地质取样和测试分析进行综合地质环境调查的建议,并对具体采用的调查技术和调查内容进行了论述。     

高位瓦斯抽放钻孔在降低综采工作面瓦斯浓度中的应用

林南仓属于低瓦斯矿井,但存在高瓦斯区域。煤层和采空区是瓦斯的主要来源,尤以采空涌出量大,给煤矿生产和安全带来了极大隐患。通过在1129综采工作面风道施工高位瓦斯孔,把钻孔打到采空区一侧煤层顶板以上冒落裂隙带内,用钻孔进行瓦斯抽放,使采空内的瓦斯通过裂隙带沿钻孔抽出,有效降低综采工作面瓦斯浓度,保证综采工作面正常回采和安全生产。     

三维地震技术在煤层顶板稳定性研究中的应用

龙固井田为全隐蔽的华北型煤田,位于巨野煤田中部,其首采扩大区主采煤层为3号煤层。考虑3煤层顶板稳定性主要受其顶板的构造信息和岩性信息影响,因此首先依据三维地震勘探综合解释成果及波阻抗反演解释成果对二者进行定量化,然后对波阻抗数据进行归一化处理,使得波阻抗数据和量化后的构造数据具有相同的变化范围及等量贡献。在此距离范围内构造和岩性的权值各为0．5,依此生成综合因素煤层顶板稳定性隶属度。分析3煤层顶板以上10m、20m处的综合因素煤层顶板稳定性隶属度图可以发现,该区3煤层顶板稳定性比较好。且其稳定性主要是受构造因素控制,岩性因素相对影响较小。     

Using Sequential Self-Calibration Method to Identify Conductivity Distribution: Conditioning on Tracer Test data

An iterative inverse method, the sequential self-calibration method, is developed for mapping spatial distribution of a hydraulic conductivity field by conditioning on nonreactive tracer breakthrough curves. A streamline-based, semi-analytical simulator is adopted to simulate solute transport in a heterogeneous aquifer. The simulation is used as the forward modeling step. In this study, the hydraulic conductivity is assumed to be a deterministic or random variable. Within the framework of the streamline-based simulator, the efficient semi-analytical method is used to calculate sensitivity coefficients of the solute concentration with respect to the hydraulic conductivity variation. The calculated sensitivities account for spatial correlations between the solute concentration and parameters. The performance of the inverse method is assessed by two synthetic tracer tests conducted in an aquifer with a distinct spatial pattern of heterogeneity. The study results indicate that the developed iterative inverse method is able to identify and reproduce the large-scale heterogeneity pattern of the aquifer given appropriate observation wells in these synthetic cases.     

The Tau Model for Data Redundancy and Information Combination in Earth Sciences: Theory and Application

Many decision-making processes in the Earth sciences require the combination of multiple data originating from diverse sources. These data are often indirect and uncertain, and their combination would call for a probabilistic approach. These data are also partially redundant with each other or with all others taken jointly. This overlap in information arises due to a variety of reasons—because the data arises from the same geology, because they originate from the same location or the same measurement device, etc. The proposed tau model combines partially redundant data, each taking the form of a prior probability for the event being assessed to occur given that single datum. The parameters of that tau model measure the additional contribution brought by any single datum over that of all previously considered data; they are data sequence-dependent and also data value-dependent. Data redundancy depends on the sequence in which the data is considered and also on the data values themselves. However, for a given sequence, averaging the tau model parameters over all possible data values leads to exact analytical expressions and corresponding approximations and inference avenues. Information on multiple-point connectivity of permeability arrives from core data, well-test data and seismic data which are defined over varying supports with complex redundancy between these information sources. In order to compute these tau weights for determining connectivity, one needs a model of data redundancy, here expressed as a vectorial training image (Ti) constructed using a prior conceptual knowledge of geology and the physics of data measurement. From such a vectorial Ti, the tau weights can be computed exactly. Neglecting data redundancy leads to an over-compounding of individual data information and the possible risk of making extreme decisions.     

Group Time Delay in the Reflection of P-Polarized Electromagnetic Plane Waves at a Stratigraphic Interface

The group time delay (GTD) formulae of quasi-total reflection of inhomogeneous P-polarized electromagnetic waves (P-PEW, whose electric field parallels to the plane of incidence), caused by the Goos–Hänchen effect, is derived by the phase shift of the wave. A numerical example where the frequency equals to 1 GHz is given. The curves of calculating results show that there are three discontinuous points at the critical angle of phase shift vector, the critical angle of attenuation vector and 90^○. When the angle of incidence is equal to one of these three angles, the GTD will become infinite, and the electromagnetic wave will propagate along the interface. The GTD will be very large, when the angle of incidence is close to one of these three angles. The results indicate that there is an important relationship between the two critical angles and the conductivity and permittivity of the two strata, and that the GTD has an important relationship with the angle of incidence. These results can be used to determine the lithology of the strata and to delimit the interfaces of strata more effectively. It is suggested that this research may prove useful in electromagnetic logging analysis and, perhaps, in the design of logging instruments.     

Stability Analysis and Numerical Simulation of Differential Frost Heave

Differential frost heave is often implicated in the formation of patterned ground in regions subject to recurrent freezing and thawing. A linear stability analysis (LSA) indicates that a continuum model of frost heave is linearly unstable under typical natural freezing conditions of silty-clay soils. A two-dimensional non-linear numerical analysis corroborates the frozen time LSA results, and also indicates the importance of non-linear and time-dependent terms that ultimately lead to a preferred mode, which the LSA fails to predict. Instability of the one-dimensional solution occurs at shallow freezing depths and near-zero surface loads when positive perturbations in the ice content at the freezing front lead to a concomitant increase in thermomolecular pressure and upward ice velocity. Differential frost heave can then occur because of the increased heat flux from the perturbed surfaces. A three-dimensional model using random initial surface perturbations indicates that regular surface patterns will evolve with a length scale in the order of 2–4 meters, which corresponds quite closely with naturally-occurring non-sorted patterned ground.     

Non-Linear Theory and Power-Law Models for Information Integration and Mineral Resources Quantitative Assessments

Singular physical or chemical processes may result in anomalous amounts of energy release or mass accumulation that, generally, are confined to narrow intervals in space or time. Singularity is a property of different types of non-linear natural processes including cloud formation, rainfall, hurricanes, flooding, landslides, earthquakes, wildfires, and mineralization. The end products of these non-linear processes can be modeled as fractals or multifractals. Hydrothermal processes in the Earth’s crust can result in ore deposits characterized by high concentrations of metals with fractal or multifractal properties. Here we show that the non-linear properties of the end products of singular mineralization processes can be applied for prediction of undiscovered mineral deposits and for quantitative mineral resource assessment, whether for mineral exploration or for regional, national and global planning for mineral resource utilization. In addition to the general theory and framework for the non-linear mineral resources assessment, this paper focuses on several power-law models proposed for characterizing non-linear properties of mineralization and for geoinformation extraction and integration. The theories, methods, and computer system discussed in this paper were validated using a case study dealing with hydrothermal Au mineral potential in southern Nova Scotia, Canada.     

Inversely-Mapped Analytical Solutions for Flow Patterns around and within Inclined Elliptic Inclusions in Fluid-Saturated Rocks

In this paper, an inverse mapping is used to transform the previously-derived analytical solutions from a local elliptical coordinate system into a conventional Cartesian coordinate system. This enables a complete set of exact analytical solutions to be derived rigorously for the pore-fluid velocity, stream function, and excess pore-fluid pressure around and within buried inclined elliptic inclusions in pore-fluid-saturated porous rocks. To maximize the application range of the derived analytical solutions, the focal distance of an ellipse is used to represent the size of the ellipse, while the length ratio of the long axis to the short one is used to represent the geometrical shape of the ellipse. Since the present analytical solutions are expressed in a conventional Cartesian coordinate system, it is convenient to investigate, both qualitatively and quantitatively, the distribution patterns of the pore-fluid flow and excess pressure around and within many different families of buried inclined elliptic inclusions. The major advantage in using the present analytical solution is that they can be conveniently computed in a global Cartesian coordinate system, which is widely used in many scientific and engineering computations. As an application example, the present analytical solutions have been used to investigate how the dip angle of an inclined elliptic inclusion affects the distribution patterns of the pore-fluid flow and excess pore-fluid pressure when the permeability ratio of the elliptic inclusion is of finite but nonzero values.     

广州航空邮件处理中心土洞及桩端软土层处理工艺研究

广州航空邮件处理中心位于岩溶发育地区,场区内存在大量土洞、溶洞等不良地质现象。该建筑物拟采用静压桩基础。为保证建筑物及场道安全,须对场区土洞进行处理。结合场地具体情况和施工工期要求,首先对大体积土洞进行泵注细石砼骨料充填处理,以消除地面大面积塌陷的危险,消灭压桩机械施工安全隐患,然后开始进行静压桩基础施工,同时在场地允许区域对中小体积土洞、桩端软土层等分别进行泵注砂浆骨料和袖阀注浆处理．以确保洞体密实和保证桩基承载力。通过对处理工艺、处理范围的比较筛选和对质量控制要点、施工技术要点的分析提炼．达到了施工简便、造价合理、安全高效的目的,并采用骨料取芯检测、土体标贯试验和压缩试验、洞体物探等多种检测手段,完全达到了设计要求,取得了良好的工程效果和经济效益。