Synoptic analysis of dust storms in the Middle East

Dust storm in the Middle East and south-west Asia is a natural hazard and the Tigris-Euphrates alluvial plain has been recognized as the main dust source in this area. In this study, more than 60 dust storms that occurred during the period 2003–2011 are investigated on the basis of MODIS satellite images, and 12 of the dust storms are selected for synoptic analysis using the NCEP-NCAR Reanalysis Data. The potential dust sources in the Middle East and south-west Asian region (20°E to 80°E, 5°N to 50°N) are analyzed and used in the synoptic analysis. Dust storms in the region can be grouped into two main categories, i.e., the Shamal dust storms and the frontal dust storms. Synoptic systems, associated with the two categories, are distinguished and the frequency of the patterns is identified. For 68% of the Shamal dust storms, a high pressure system is situated between 0°E to 30°E and 27°N to 45°N, and a low pressure system between 50°E to 70°E and 23°N to 43°N. For 86% of the frontal dust storms, a high is located between 51°E to 67°E and 18°N to 33°N and a low between 28°E to 48°E and 32°N to 43°N. Three main patterns for Shamal dust storms are identified, which represent about 60% of the Shamal dust storms. This analysis confirms that the Shamal is related to the anticyclones located over northern Africa to Eastern Europe and the monsoon trough over Iraq, southern Iran, Pakistan and the Indian Subcontinent. The analysis also shows that the main dust sink for the frontal dust storms in Tigris and Euphrates alluvial plain extends from center of Iraq to west and center of Iran and, in most severe cases, to northern Iran and the southern coast of the Caspian Sea.     

Mooring optimization of floating platforms using a genetic algorithm

This paper presents a new procedure for the optimization of the mooring design of floating platforms, in which an automatic design sequence is also established. Regarding the optimization philosophy, the following aspects are dealt with:

• The optimization of the platform heading and its mooring pattern, taking into account the environmental force spreading;

• optimum line length or line tension for each mooring line, associated to the optimization of the mooring line materials and sizes.

Basically, the main goal of this paper is to introduce a new method, which will provide the quickest way to find the best mooring system, defined here as that which minimizes platform responses.A genetic algorithm (GA) is applied in this contribution, and this paper describes exactly the procedure of developing a GA code directed toward the solution of mooring design optimization problems. In order to prove the efficiency and the vast potential of the proposed algorithm as a design tool, sample moorings are analyzed for different environmental conditions and the final results, including the time required to run them, are presented.     

Chemical identification,antioxidant, cholinesterase inhibitory,and cytotoxic properties of fucoidan extracted from Persian Gulf Sargassum angustifolium

Marine macroalgal sulfated fucose-containing polysaccharides, like fucoidan, have drawn significant attention due to their biotechnological potentials, such as anti-cancer, antioxidant, and anti-cholinesterase activities. The fucoidan derived from brown macroalgae Sargassum angustifolium species (FSA) was investigated for its cytotoxic effects and alterations in cell proliferation, and cell cycle-related gene expression in the present study occurred on NB4 cell line. The results showed that FSA would induce p53, p21, pro-apoptotic genes and increase expression of the p15 gene as a cell arrest marker. Also, FSA inhibited the anti-apoptotic effect of the Bcl-2 gene and decreased dnmt-1 gene expression. FSA significantly exhibited potent 2, 2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity (p<0.05) with an IC₅₀ value of 0.157 mg/mL and showed moderate anti-acetylcholinesterase activity with an IC₅₀ value of 1.20 μg/mL. These results indicated the potential of FSA for the development of therapeutic or preventive agents of cancer and Alzheimer’s disease mainly through cytotoxic effect and AChE (acetylcholinesterase) inhibition as well as additional antioxidant capacities.     

A study of crude oil‐degrading bacteria from mangrove forests in the Persian Gulf

Mangroves are coastal ecosystems, found in tropical and subtropical regions around the world. They are found in the transitional zones between land, sea, and rivers. Petroleum hydrocarbons are the most common environmental pollutants, and oil spills pose a great hazard to mangroves forests. This research was focused on the isolation and characterization of crude oil‐degrading bacteria from mangrove ecosystems at the Persian Gulf. Sixty‐one crude oil‐degrading bacteria were isolated from mangrove samples (plant, sediment, and seawater) that enriched in ONR7a medium with crude oil as only carbon source. Some screening tests such as growth at high concentration of crude oil, bioemulsifier production, and surface hydrophobicity were done to select the most efficient strains for crude oil degradation. Molecular identification of strains was carried out by amplification of the 16S rRNA gene by PCR. The results of this study were indicated that the quantity of crude oil‐degrading bacteria was higher in the root of mangrove plants compare to other mangrove samples (sediment and seawater). Also, identification results confirmed that these isolated strains belong to Vibrio sp. strain NW4, Idiomarina sp. strain BW32, Kangiella sp. strain DP40, Marinobacter sp. strain DW44, Halomonas sp. strain BS53, and Vibrio sp. strain DS35. The application of bioremediation strategies with these bacteria can reduce crude oil pollution in this important marine environment.     

Composition, porosity, and reservoir potential of the Middle Jurassic Kashafrud Formation, northeast Iran

In the Kopet-Dagh Basin of Iran, deep-sea sandstones and shales of the Middle Jurassic Kashafrud Formation are disconformably overlain by hydrocarbon-bearing carbonates of Upper Jurassic and Cretaceous age. To explore the reservoir potential of the sandstones, we studied their burial history using more than 500 thin sections, supplemented by heavy mineral analysis, microprobe analysis, porosity and permeability determination, and vitrinite reflectance.The sandstones are arkosic and lithic arenites, rich in sedimentary and volcanic rock fragments. Quartz overgrowths and pore-filling carbonate cements (calcite, dolomite, siderite and ankerite) occluded most of the porosity during early to deep burial, assisted by early compaction that improved packing and fractured quartz grains. Iron oxides are prominent as alteration products of framework grains, probably reflecting source-area weathering prior to deposition, and locally as pore fills. Minor cements include pore-filling clays, pyrite, authigenic albite and K-feldspar, and barite. Existing porosity is secondary, resulting largely from dissolution of feldspars, micas, and rock fragments, with some fracture porosity. Porosity and permeability of six samples averages 3.2% and 0.0023 mD, respectively, and 150 thin-section point counts averaged 2.7% porosity. Reflectance of vitrinite in eight sandstone samples yielded values of 0.64-0.83%, in the early mature to mature stage of hydrocarbon generation, within the oil window.Kashafrud Formation petrographic trends were compared with trends from first-cycle basins elsewhere in the world. Inferred burial conditions accord with the maturation data, suggesting only a moderate thermal regime during burial. Some fractures, iron oxide cements, and dissolution may reflect Cenozoic tectonism and uplift that created the Kopet-Dagh Mountains. The low porosity and permeability levels of Kashafrud Formation sandstones suggest only a modest reservoir potential. For such tight sandstones, fractures may enhance the reservoir potential.     

Micromechanical approach to swelling behavior of capillary-porous media with coupled physics

A detailed multiscale analysis is presented of the swelling phenomenon in unsaturated clay-rich materials in the linear regime through homogenization. Herein, the structural complexity of the material is formulated as a three-scale, triple porosity medium within which microstructural information is transmitted across the various scales, leading ultimately to an enriched stress-deformation relation at the macroscopic scale. As a side note, such derived relationship leads to a tensorial stress partitioning that is reminiscent of a Terzaghi-like effective stress measure. Otherwise, a major result that stands out from previous works is the explicit expression of swelling stress and capillary stress in terms of micromechanical interactions at the very fine scale down to the clay platelet level, along with capillary stress emerging due to interactions between fluid phases at the different scales, including surface tension, pore size, and morphology. More importantly, the swelling stress is correlated with the disjoining forces due to electrochemical effects of charged ions on clay minerals and van der Waals forces at the nanoscale. The resulting analytical expressions also elucidate the role of the various physics in the deformational behavior of clayey material. Finally, the capability of the proposed formulation in capturing salient behaviors of unsaturated expansive clays is illustrated through some numerical examples.     

On the planar motion in the full two-body problem with inertial symmetry

Relative motion of binary asteroids, modeled as the full two-body planar problem, is studied, taking into account the shape and mass distribution of the bodies. Using the Lagrangian approach, the equations governing the motion are derived. The resulting system of four equations is nonlinear and coupled. These equations are solved numerically. In the particular case where the bodies have inertial symmetry, these equations can be reduced to a single equation, with small nonlinearity. The method of multiple scales is used to obtain a first-order solution for the reduced nonlinear equation. The solution is shown to be sufficient when compared with the numerical solution. Numerical results are provided for different example cases, including truncated-cone-shaped and peanut-shaped bodies.     

Constraints on Mercury’s Na exosphere: Combined MESSENGER and ground-based data

We have used observations of sodium emission obtained with the McMath-Pierce solar telescope and MESSENGER’s Mercury Atmospheric and Surface Composition Spectrometer (MASCS) to constrain models of Mercury’s sodium exosphere. The distribution of sodium in Mercury’s exosphere during the period January 12-15, 2008, was mapped using the McMath-Pierce solar telescope with the 5″ × 5″ image slicer to observe the D-line emission. On January 14, 2008, the Ultraviolet and Visible Spectrometer (UVVS) channel on MASCS sampled the sodium in Mercury’s anti-sunward tail region. We find that the bound exosphere has an equivalent temperature of 900-1200 K, and that this temperature can be achieved if the sodium is ejected either by photon-stimulated desorption (PSD) with a 1200 K Maxwellian velocity distribution, or by thermal accommodation of a hotter source. We were not able to discriminate between the two assumed velocity distributions of the ejected particles for the PSD, but the velocity distributions require different values of the thermal accommodation coefficient and result in different upper limits on impact vaporization. We were able to place a strong constraint on the impact vaporization rate that results in the release of neutral Na atoms with an upper limit of 2.1 × 10⁶ cm⁻² s⁻¹. The variability of the week-long ground-based observations can be explained by variations in the sources, including both PSD and ion-enhanced PSD, as well as possible temporal enhancements in meteoroid vaporization. Knowledge of both dayside and anti-sunward tail morphologies and radiances are necessary to correctly deduce the exospheric source rates, processes, velocity distribution, and surface interaction.