Jewish settlement and its economic impact on the West Bank, 1967–1987

This paper focuses on the process of Jewish settlement in the West Bank and its economic consequences in the period from 1967 to the outbreak of the Intifada late in 1987. It attempts to show that this process is the practical application of Israeli objectives which are based on expansion and occupation of neighbouring Arab lands, facilitated by the fashioning of a dual or bifurcate economy there.After the war of June 1967, Israeli occupation authorities started to draw up plans with a view to settling Jews in the West Bank. There has been an increase in the numbers of settlements and settlers, estimated at 122 and 52,000 respectively in 1987. The pattern of settlement distribution is randomly dispersed, although it is concentrated in a region located to the NW of Jerusalem. The settlement began in the Jordan valley and extended gradually westward in the highlands.Jewish settlement has affected economic development of the West Bank, where there were many constraints on Arab agriculture and industry. Inequality is evident between settlers and Palestinians in an economy that has been structurally bifurcated: although settlers represent about 3% of total population of the West Bank, their economic activity constitutes at least 35% of the GDP of the West Bank.     

Removal of Hydrogen Sulfide by Physico‐Biological Filter Using Mixed Rice Husk Silica and Dried Activated Sludge

This study investigated the effectiveness of a new packing material, namely mixed rice husk silica with dried activated sludge for removing H₂S. Dried sewage sludge was collected from Putrajaya sewage treatment plant in Malaysia. Rice husk silica was prepared at temperature of 800°C, after acid leaching and mixed with dried sewage sludge to be utilized in a polyvinyl chloride filter. The system was operated under variable conditions of two parameters, different inlet gas concentration and different inlet flow rate. H₂S was passed through the filter with one liter of the packing material. More than 99.96% removal efficiency (RE) with empty bed residence time (EBRT) of 90–45 s and 300 ppm inlet concentration was observed. However, the RE decreased to 96.87% with the EBRT of 30 s. The maximum elimination capacity (EC) of 52.32 g/m³/h was obtained with the RE of 96.87% and H₂S mass loading rate of 54 g/m³/h, while at the RE of 99.96%, maximum EC was 26.99 g/m³/h with the H₂S mass‐loading rate of 27 g/m³/h. A strong significant correlation between increasing of H₂S mass loading rate and pressure drop was also detected (p < 0.01). Maximum pressure drop was 3.0 mm H₂O after 53 days of operating time, the EBRT of 30 s, and 54 g/m³/h of H₂S loading rate. These observations suggest that the mixture of rice husk silica with dried activated sludge is a suitable physico‐biological filter for H₂S removal.     

U–Pb geochronology,Sr–Nd isotopic compositions,geochemistry and petrogenesis of Shah Soltan Ali granitoids,Birjand, Eastern Iran

The Shah Soltan Ali area (SSA) is located in the eastern part of the Lut Block metallogenic province. In this area different types of sub-volcanic intrusions including diorite porphyry, monzonite porphyry and monzodiorite porphyry have intruded into basaltic and andesitic rocks. Zircon U–Pb dating and field observations indicate that intermediate to mafic volcanic rocks (38.9 Ma) are older than subvolcanic units (38.3 Ma). The subvolcanic intrusions show high-K calc-alkaline to shoshonitic affinity and are metaluminous. Based on mineralogy, high values of magnetic susceptibility [(634 to 3208) × 10^?5 SI], and low initial ⁸⁷Sr/⁸⁶Sr ratios, they are classified as belonging to the magnetite-series of oxidant I-type granitoids and are characterized by an enrichment in LREEs relative to HREEs, with negative Nb, Ti, Zr and Eu anomalies. These granitoids are related to volcanic arc (VAG) and were generated in an active continental margin. Low initial ⁸⁷Sr/⁸⁶Sr ratios (0.7043 to 0.7052) and positive εNd values (+1.48 to +3.82) indicate that the parental magma was derived from mantle wedge. Parental magma was probably formed by low degree of partial melting and metasomatized by slab derived fluids. Then assimilation and fractional crystallization processes (AFC) produced the SSA rocks. This magma during the ascent was contaminated with the crustal material.All data suggest that Middle-Late Eocene epoch magmatism in the SSA area, occurred during subduction of Neo-Tethys Ocean in east of Iran (between Afghan and Lut Blocks).     

In situ study of the $$ R\overline{3} c \to R\overline{3} m $$ orientational disorder in calcite

The temperature dependences of the crystal structure and intensities of the (113) and (211) reflections in calcite, CaCO₃, were studied using Rietveld structure refinements based on synchrotron powder X-ray diffraction data. Calcite transforms from to at about T _c = 1,240 K. A CO₃ group occupies, statistically, two positions with equal frequency in the disordered phase, but with unequal frequency in the partially ordered phase. One position for the CO₃ group is rotated by 180° with respect to the other. The unequal occupancy of the two orientations in the partially ordered phase is obtained directly from the occupancy factor, x, for the O1 site and gives rise to the order parameter, S = 2x − 1. The a cell parameter shows a negative thermal expansion at low T, followed by a plateau region at higher T, then a steeper contraction towards T _c, where the CO₃ groups disorder in a rapid process. Using a modified Bragg–Williams model, fits were obtained for the order parameter S, and for the intensities of the (113) and (211) reflections. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Evaluation of Indirect Tensile Strength of Track Ballast Using Weibull Statistics

Iraq is planning to expand and rehabilitate its current railway network, thus demanding huge amounts of proper ballast material. There are three common quarries in Iraq, Sinjaar in the northern sector, Al-Qaim in western desert and Najaf-sea in the middle and southern parts of Iraq. The selection of proper track ballast material is of prime importance in design and construction of railway projects. The single particle-crushing test is a simple indirect tensile test that provides useful data for the selection of the material. Two types of railway ballast materials from (Najaf-sea and Al-Qaim) quarries are commonly used in the construction of railway in Iraq. The single particle-crushing test was performed for various ballast sizes, and the obtained data were analyzed using Weibull analysis. Najaf-sea crushed stones indicate higher tensile strength for all particle sizes compared to corresponding particle sizes of Al-Qaim crushed stone. In addition, an inverse linear relationship had obtained, between tensile strength and particle size with R ² (0.837 and 0.979) for Al-Qaim and Najaf-sea crushed stone, respectively, such relationships are important in evaluating the suitability of the materials in terms of the survival probability     

Gaussian Process Emulators for Computer Experiments with Inequality Constraints

Physical phenomena are observed in many fields (science and engineering) and are often studied by time-consuming computer codes. These codes are analyzed with statistical models, often called emulators. In many situations, the physical system (computer model output) may be known to satisfy inequality constraints with respect to some or all input variables. The aim is to build a model capable of incorporating both data interpolation and inequality constraints into a Gaussian process emulator. By using a functional decomposition, a finite-dimensional approximation of Gaussian processes such that all conditional simulations satisfy the inequality constraints in the entire domain is proposed. To show the performance of the proposed model, some conditional simulations with inequality constraints such as boundedness, monotonicity or convexity conditions in one and two dimensions are given. A simulation study to investigate the efficiency of the method in terms of prediction is included.     

Facies analysis of the Semanggol Formation,South Kedah,Malaysia: A possible Permian–Triassic boundary section

Although the Permian–Triassic Semanggol Formation is widely distributed in northwestern Peninsula Malaysia and is made of various lithofacies, its sedimentology and possible relation with the Permian–Triassic boundary (PTB) were not considered before. In this study, detailed facies analysis was conducted for two sections of the Semanggol Formation at the Bukit Kukus and Baling areas, South Kedah to clarify its sedimentology and relation to the PTB. Four facies from the Permian part of the Semanggol Formation that were identified at the Bukit Kukus section include laminated black mudstone, interbedded mudstone and sandstone, volcanogenic sediments, and bedded chert. In Baling area, the Triassic part of the formation is classified into three members. The lower member comprises of claystone and bedded chert facies, while the middle member is composed of sandstone and claystone interbeds (rhythmite). On the other hand, the upper member is grouped into two main units. The lower unit is mainly claystone and includes two facies: the varve-like laminated silt and clay and massive black claystone. The upper unit is composed of various sandstone lithofacies ranging from hummocky cross stratified (HCS) sandstone to thinly laminated sandstone to burrowed sandstone facies. The HCS sandstones occur as two units of fine-grained poorly sorted sandstone with clay lenses as flaser structure and are separated by a hard iron crust. They also show coarse grains of lag deposits at their bases. The laminated black mudstone at the lowermost part of the Semanggol Formation represents a reducing and quite conditions, which is most probably below the fairweather wave base in offshore environment that changed upwards into a fining upward sequence of tide environment. Abundance of chert beds in the volcanogenic sediments suggests the deposition of tuffs and volcanic ashes in deep marine setting which continues to form the Permian pelagic bedded chert and claystone. The bedded chert in the lower member of the Triassic section suggests its formation in deep marine conditions. The rhythmic sandstone and claystone interbeds of the middle member are suggestive for its formation as a distal fan of a turbidite sequence. Lithology and primary sedimentary structure of the upper member suggest its deposition in environments range from deep marine represented by the varve-like laminated silt and clay to subtidal environment corresponds to the massive black claystone to coastal environment represented by the hummocky sandstone units and reaches the maximum regression at the hiatus surface. Another cycle of transgression can be indicated from the second hummocky unit with transgressive lag deposits that develops to relatively deeper conditions as indicated from the formation of relatively thick laminated sandstone and bioturbated massive sandstone facies that represent tidal and subtidal environment, respectively. Late Permian lithological variation from the radiolarian chert into early Triassic claystone probably resulted from a decrease in productivity of radiolarians and might represent a PTB in the Semanggol Formation. Volcanogenic sediments in the studied section can be used as an evidence for volcanic activities at the end of the Permian, which is probably connected to the nearby volcanic ash layers in the eastern China, the ultimate cause of the PTB in this area. Black mudstone in the Permian part of the studied section may be interrelated to the Latest Permian Anoxia that started to build in the deep ocean well before the event on shallow shelves.     

Hydrogeological framework and estimation of aquifer hydraulic parameters using geoelectrical data: a case study from West Iran

Detailed local geological, geophysical, and hydrogeological investigations were carried out for the alluvial aquifer in the Kangavar basin, West Iran to delineate the architecture of different subsurface geological horizons using lithologs and generated vertical electrical sounding (VES) data. An attempt has also been made to estimate aquifer transmissivity from resistivity data. Forty VESs were recorded with the Schlumberger electrode configuration in the study area; 28 of these were selected for evaluation. The maximum current electrode spacing was 400–500 m. The data obtained were interpreted by computer iterative modeling with curve matching for calibration purposes. In order to ascertain the subsurface geological framework, the general distribution of resistivity responses of the geological formations was obtained and geoelectrical sections along a number of lines were prepared. Probable aquifer horizons from these sections were identified. The transmissivity of the unconfined aquifer was computed by determining the Dar-Zarrouk parameters (longitudinal unit conductance and transverse unit resistance) and were compared with the actual field transmissivity. The results showed a direct relation between aquifer transmissivity and modified transverse resistance.     

Lessons learnt from a collaborative management programme in coastal Tanzania

The Tanga Coastal Zone Conservation and Development Programme, initiated in 1994, was among the first such projects to make livelihoods improvement a key objective, and to use a community-based approach. It developed an approach to coastal management planning that is broadly satisfactory to both communities and the government. Six fisheries management areas and two mangrove management areas were established. Institutional arrangements for the collaborative approach were strengthened and community leaders and local government officers were trained in a range of relevant skills. A coastal environmental education programme for primary schools involved several thousand schoolchildren, and a gender programme built the confidence of women. Implementation of the management measures was noticeably harder than planning, particularly elimination of destructive fishing methods. Fishers and coastal communities now however have a much greater involvement in, and understanding of, coastal management and consequently a greater sense of ownership.