ESSAI DE DETERMINATION AUTOMATIQUE DES VITESSES SISMIQUES PAR MESURES ENTRE PUITS*

Large memory computers create new possibilities for seismic interpretation in well-drilled areas, and more generally in problems involving deep sources. Records obtained by well-to-surface, surface-to-well and/or well-to-well propagation contain a large amount of information, owing to the great number of seismic rays travelling throughout the subsurface. This paper considers two successive steps: — direct case: computation of the first arrival times of seismic rays propagating through a two-dimensional subsurface with given vertical and horizontal velocity variations; — inverse case: computation of a two-dimensional velocity distribution, knowing the travel times of seismic rays through the subsurface. A computer program has been elaborated to solve both direct and inverse problems. There are no difficulties with the direct case; a certain number of uncertainties remain with the inverse case.     

Significance of MORB-derived Amphibolites from the Aracena Metamorphic Belt, Southwest Spain

The Aracena metamorphic belt, in the southwest Iberian Massif,is characterized by the presence of MORB-derived amphibolitesand continental rocks deformed and metamorphosed during theHercynian orogeny. Geochemical relationships of these amphibolitesindicate the existence of a multiple fractionation process froma set of parental magmas, implying the existence of a multi-chambersystem beneath the ridge where the basalt protolith was extruded.Neodymium isotopic ratios are typical of MORB, and oxygen isotopesindicate that these amphibolites have been derived from theuppermost part of the oceanic crust. Thermal evolution, revealedfrom the study of chemical variations in the amphibole chemistry,is interpreted as resulting from subduction in a low-pressureregime in which the thermal structure of the continental hanging-wallplayed an important role. This continental wall was previouslyheated by subduction of a slab window resulting from migrationof a triple junction along the continental edge during plateconvergence. Three petrologic arguments support this tectonicmodel. These are: (1) the low-pressure inverted metamorphicgradient of amphibolites of the oceanic domain; (2) the high-temperature-low-pressure metamorphism of the continental hanging wall; (3)the early intrusion of boninites into the continental domain. ^*Corresponding author.     

LINKING SEDIMENT EXPOSURE WITH EFFECTS: MODELING TECHNIQUES, ORGANIC AVAILABILITY AND UPTAKE

1 INTRODUCTION Sediments are the ultimate sink for many hydrophobic contaminants and represent biologically important environmental habitats. Exposure of the sediment-associated contaminants is not only influenced by the fate and transport of sediment but also is influenced by a variety of physical, chemical, and biological processes that involve no net movement of sediments. These processes include pore water transport processes such as advection and diffusion, and sediment mixing process…     

陆壳多次重熔与火山岩型铀多金属矿田的形成

产于火山岩中的沥青铀矿床常伴生Mo、Cu、Pb、Zn、Au、Ag等元素,形成铀多金属矿床和矿田。文中在认识花岗岩型铀多金属矿田成因的基础上,对华北沽源盆地和华南仁差盆地的铀多金属矿田的主要矿床成矿特征进行对比研究。结果表明此类矿床是火山岩地层之后的热液矿床,其形成与岩浆喷发过程无关。热液成矿作用一般有早、晚两期：早期主要为亲硫元素,形成金属硫化物矿床;晚期为亲氧元素成矿,形成沥青铀矿床。盆地的沉降使得早期金属硫化物成矿壳层位置下降,从而缩短了与晚期重熔界面之间的距离,造成晚期氧化物(沥青铀矿)成矿壳层在空间上与其重叠或靠近,从而形成氧(沥青铀矿)硫(金属硫化物)复合矿床(矿田)。     

1988—2018年那曲市其香错水域面积变化及原因分析

基于Landsat卫星遥感数据,采用水体指数法和相关分析法,分析1988—2018年那曲市双湖县其香错湖泊水域面积变化及原因。结果表明：该湖泊近31 a内水域面积呈显著增长趋势（R²=0.88,P < 0.001）,31 a内增长了33.37 km²,增长率为18.03%;从空间上分析,其香错在近31 a内湖泊面积不断向四周扩展,其中在东、西方向和北部变化尤为显著。湖泊所在区域年平均气温呈增加趋势,蒸发量显著减小,冻土深度也明显减小。在上述因素的共同作用下,引起湖泊补给水源的增加和湖泊水容量的增大,最终导致湖泊面积持续上涨。     

黄河源区气候变化的季节特征与区域差异研究

基于黄河源区有关气象台站的观测数据,对该区黄河沿水文站以上、黄河沿水文站-吉迈水文站区间、吉迈水文站-玛曲水文站区间、玛曲水文站-唐乃亥水文站区间各区域及整个黄河源区1960-2014年期间气温、降水的季节变化特征及其区域差异进行了分析。结果表明：黄河源区气温变化与全球气温变化有着较好的一致性,各区年平均气温与各季气温的年际变化均呈波动状上升态势并明显高于过去50a全球与我国气温的升幅,且各气温系列升幅差异不大;而各区年平均气温与各季气温的年代际变化的上升态势较年际变化的更为显著,但不同区域各季气温升幅差异较大。各区气温均在1996年后出现一个跃动,跃动后各气温系列均值较跃动前有较大幅度的上升。由于区域地理环境的影响,黄河源区降水量的变化比较复杂,各区各季降水量的变化具有较大的差异。近50余年来,总体上整个河源区平均降水量的年际变化呈不明显的增长态势。其中河源区的上半部分,即黄河沿以上、黄河沿-吉迈之间等海拔较高的区域年降水量增长比较显著,而源区的下半部分,即吉迈-玛曲、玛曲-唐乃亥之间的区域,年降水呈减少态势,并且对全区平均降水量与产流量贡献最大的吉迈-玛曲之间的区域,年降水量的减少非常显著。各区冬春季和夏季降水量普遍呈增长态势,秋季是河源区各季节中降水唯一减少的季节,其中吉迈-玛曲之间的区间秋季降水量的减少最为显著。各区域各季降水量的年代际变化较其年际变化差异更大,但近十余年来大部分区域各季降水普遍偏多。各区域降水系列亦有突变发生,但突变时间并不像气温系列那样一致;年降水量与夏季降水量的突变大都发生在2005年,秋季降水量突变大都发生在1986年,春季和冬季降水量突变的时间杂乱无序;突变前后系列均值有增有减,且幅度大小不等。     

天山南、北坡典型河流出山径流对气候变化响应的分析对比

基于有关水文、气象台站的降水、气温和径流观测资料,对天山南、北坡的代表性河流——开都河与乌鲁木齐河上游山区径流变化及其对气候变化的响应进行了分析。在此基础上建立山区径流对气候变化的响应模型,假定不同的气候情景组合,就两条河流出山径流对气候变化的敏感性进行分析对比。结果表明,近40余年,两条河流山区年降水量、平均气温及径流总体上均呈波动状上升态势。一方面径流与降水、气温的变化呈明显的正相关关系;另一方面山区径流对降水、气温变化的响应的程度存在着明显的区域性差异,即乌鲁木齐河出山径流对降水变化的响应程度明显强于开都河,而开都河出山径流对气温变化的敏感性要高于乌鲁木齐河。     

石墨炉原子吸收光谱法测定味精中痕量铅的不确定度评定

以石墨炉原子吸收光谱法测定味精中痕量铅为例,对测定结果的不确定度来源进行分析,对测定过程的主要不确定度分量进行合理评定,包括称量不确定度、体积不确定度、曲线拟合不确定度及测量重复性引入的不确定度。评估了铅含量的合成标准不确定度和扩展不确定度。对于铅含量为0.025×10-6的味精样品,其扩展不确定度为0.002×10-6。     

青藏铁路建设冻土工程问题的深入研究和实践

青藏铁路开工建设以来的冻土工程问题研究, 在综合以往冻土学研究成果基础上, 针对冻土区大规模工程实践对冻土和冻土环境的影响特点, 冻土和冻土工程之间相互作用本质, 用系统工程论的观点, 以工程变形为冻土工程问题研究的综合目标, 抓住冻土工程问题的热学机理本质, 用工程热力结构作为解决问题的主要手段, 取得很好的实践效果. 同时把我国冻土工程问题研究和冻土工程建设提高到一个新的水平, 为建设世界一流的高原铁路奠定了坚实的技术基础.     

POINTE AUTOMATIQUE*

The automatic picking of seismic sections replaces the slow and painstaking task of manual reflection plotting with rapid and economical processing by computer. Essentially, reflection picking is a decision-making problem which also can be considered as a sort of filtering. Mathematically this means multiplying the seismic data matrix by a more or less complex decision operator. For the sake of economy, we give an initial solution for simple cases which only require easily automatized decision-making criteria. We describe another more elaborate method for use in examining seismic phenomena which are more difficult to spot. The process used is based on the recognition of shapes and consists first of all of determining a series of characteristics capable of identifying each reflection on each trace and then of comparing these different characteristics from trace to trace so as to be able to judge the continuity or discontinuity of the reflections. Automatic picking thus leads to a schematic time-section in which only the horizons found by calculation are retained. An automatic migration program then transforms this time-section into a depth-section.